Generated by kicad-footprint-generator · KiCad file format 20260206
MCP4012T-103E
Microchip Tech · Digital Potentiometers · SOT-23-6
MCP4012T-103E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply input, specified from 1.8V to 5.5V relative to VSS, with a decoupling capacitor on VDD to VSS recommended for maximum performance. |
| 2 | VSS | power_in | Device ground reference pin. |
| 3 | U/D | input | TTL-compatible increment/decrement input; an increment moves the wiper one step toward terminal A and a decrement moves it one step toward terminal B. |
| 4 | CS | input | TTL-compatible chip select input; driving it to VIL enables serial commands, driving it to VIHH enables high-voltage serial commands, and it has an internal pull-up that holds it at VIH when floating. |
| 5 | W | passive | Potentiometer wiper terminal; the voltage must be between VSS and VDD and the pin can source or sink positive and negative current. |
| 6 | A | passive | Potentiometer terminal A, the fixed connection to the 0x3F end of the digital potentiometer; the voltage must be between VSS and VDD and the pin supports positive and negative current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | ADC/DAC/Data Conversion |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | 5.5 | V | 2 | ||
| Supply Current (serial interface inactive) | IDD | 0.3 | 1 | µA | Serial Interface Inactive (CS = VIH, U/D = VIH) | 2 | |
| Resistance (±20%), -103 device | RAB | 8 | 10 | 12 | k | -103 devices (Note 1) | 2 |
| Resistance tolerance | -20 | 20 | % | Resistance (±20%) for -103 device | 2 | ||
| Wiper Resistance | RW | 70 | 125 | Ω | 5.5V (Note 3, Note 4) | 3 | |
| Wiper Resistance | RW | 70 | 325 | Ω | 2.7V (Note 3, Note 4) | 3 | |
| Current through A, W or B | IW | 2.5 | mA | Note 6 | 3 | ||
| Rheostat Integral Nonlinearity (MCP4012/14) | R-INL | -0.5 | 0.25 | 0.5 | LSb | -103 devices (10 k), 5.5V (Note 4) | 4 |
| Rheostat Integral Nonlinearity (MCP4012/14) | R-INL | -3 | 1 | 3 | LSb | -103 devices (10 k), 2.7V (Note 7) | 4 |
| Rheostat Differential Nonlinearity (MCP4012/14) | R-DNL | -0.5 | 0.25 | 0.5 | LSb | -103 devices (10 k), 5.5V (Note 4) | 4 |
| Rheostat Differential Nonlinearity (MCP4012/14) | R-DNL | -1 | 0 | 1 | LSb | -103 devices (10 k), 2.7V (Note 7) | 4 |
| High-Voltage Input Entry Voltage (WiperLock threshold) | VIHH | 8.5 | 12.5 | V | +7°C to +125°C | 5 | |
| High-Voltage Input Entry Voltage (WiperLock threshold) | VIHH | 9 | 12.5 | V | -40°C to +125°C | 5 | |
| Input Leakage Current | IIL | -1 | 1 | µA | VIN = VDD | 5 | |
| CS Low Time | tCSLO | 5 | µs | 6 | |||
| CS High Time | tCSHI | 500 | ns | 2.7V ≤ VDD ≤ 5.5V | 6 | ||
| U/D to CS Hold Time | tLUC | 500 | ns | 2.7V ≤ VDD ≤ 5.5V | 6 | ||
| U/D to CS Hold Time | tLUC | 750 | ns | 1.8V ≤ VDD < 2.7V | 6 | ||
| CS to U/D Low Setup Time | tLCUF | 500 | ns | 6 | |||
| CS to U/D High Setup Time | tLCUR | 3 | µs | 6 | |||
| U/D High Time | tHI | 500 | ns | 6 | |||
| U/D Low Time | tLO | 500 | ns | 6 | |||
| Up/Down Toggle Frequency | fUD | 1 | MHz | 6 | |||
| Wiper Settling Time | tS | 2 | µs | 10 k CL = 100 pF | 6 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| VDD (absolute maximum) | VDD | 6.5 | V | 2 | |||
| CS and U/D inputs w.r.t VSS | -0.3 | 12.5 | V | 2 | |||
| A, B and W terminals w.r.t VSS | -0.3 | V | Upper limit printed as VDD + 0.3V | 2 | |||
| Current at Input Pins | -10 | 10 | mA | 2 | |||
| Current at Supply Pins | -10 | 10 | mA | 2 | |||
| Current at Potentiometer Pins | -2.5 | 2.5 | mA | 2 | |||
| Ambient temp with power applied | -55 | 125 | °C | 2 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| ESD protection (HBM) | 4 | kV | All pins | 2 | |||
| ESD protection (MM) | 400 | V | All pins | 2 | |||
| Nominal Resistance Tempco | R/T | 50 | ppm/°C | TA = -20°C to +70°C | 3 | ||
| Nominal Resistance Tempco | R/T | 100 | ppm/°C | TA = -40°C to +85°C | 3 | ||
| Nominal Resistance Tempco | R/T | 150 | ppm/°C | TA = -40°C to +125°C | 3 | ||
| Thermal Resistance, 6L-SOT-23 | JA | 120 | °C/W | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 61 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP4012T-103E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp4012t-103e-ch-etched.step/mcp4012t-103e-ch-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4012t-103e-ch.step/mcp4012t-103e-ch.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (70 pp, sha256
35f77d044fe80869, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).