main
Ray
Publish 0.1.0
b2a99a0
MCP4011-503E
Microchip Tech · Digital Potentiometers · SOIC-8
MCP4011-503E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply input, operating from 1.8V to 5.5V relative to VSS, with a decoupling capacitor on VDD to VSS recommended for maximum performance. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | A | passive | Potentiometer terminal A, which must be held between VSS and VDD and can carry both positive and negative current. |
| 4 | W | passive | Potentiometer wiper terminal, which must be held between VSS and VDD and can carry both positive and negative current. |
| 5 | CS | input | Chip select input: forcing VIL enables serial commands, forcing VIHH enables high-voltage serial commands, and it has an internal pull-up that holds it at VIH when floating. |
| 6 | B | passive | Potentiometer terminal B, which must be held between VSS and VDD and can carry both positive and negative current. |
| 7 | NC | unconnected | No connection. |
| 8 | U/D | input | TTL-compatible increment/decrement input that moves the wiper one step toward terminal A on increment and one step toward terminal B on decrement. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | 5.5 | V | 2 | ||
| Resistance (end-to-end, -503 device) | RAB | 40 | 50 | 60 | k | -503 devices (Note 1) | 2 |
| Resistance tolerance (-503 device) | -20 | 20 | % | Printed as (±20%) for RAB | 2 | ||
| Wiper Resistance | RW | 75 | 125 | ohm | 5.5V (Note 3, Note 4) | 3 | |
| Wiper Resistance | RW | 75 | 325 | ohm | 2.7V (Note 3, Note 4) | 3 | |
| Full-Scale Error (MCP4011/13 only) | VWFSE | -0.5 | -0.1 | 0.5 | LSb | Code 3Fh, 2.7V to 5.5V VDD | 3 |
| Zero-Scale Error (MCP4011/13 only) | VWZSE | -0.5 | 0.1 | 0.5 | LSb | Code 00h, 2.7V to 5.5V VDD | 3 |
| Current through A, W or B | IW | 2.5 | mA | Note 6 | 3 | ||
| Nominal Resistance Tempco (-20 to +70 C) | R/T | 50 | ppm/°C | TA = -20°C to +70°C | 3 | ||
| Nominal Resistance Tempco (-40 to +85 C) | R/T | 100 | ppm/°C | TA = -40°C to +85°C | 3 | ||
| Nominal Resistance Tempco (-40 to +125 C) | R/T | 150 | ppm/°C | TA = -40°C to +125°C | 3 | ||
| Ratiometric Tempco (MCP4011 and MCP4013 only) | VWA/T | 10 | ppm/°C | MCP4011 and MCP4013 only, code = 1Fh | 3 | ||
| Potentiometer Integral Nonlinearity (MCP4011/13 only) | INL | -0.5 | 0.25 | 0.5 | LSb | MCP4011/13 only (Note 2) | 4 |
| Potentiometer Differential Nonlinearity (MCP4011/13 only) | DNL | -0.5 | 0.25 | 0.5 | LSb | MCP4011/13 only (Note 2) | 4 |
| Rheostat Integral Nonlinearity (50k device, 5.5V) | R-INL | -0.5 | 0.25 | 0.5 | LSb | -503 devices (50k), 5.5V (Note 4, Note 7) | 4 |
| Rheostat Integral Nonlinearity (50k device, 2.7V) | R-INL | -1 | 0.25 | 1 | LSb | -503 devices (50k), 2.7V (Note 7) | 4 |
| Rheostat Differential Nonlinearity (50k device, 5.5V) | R-DNL | -0.5 | 0.25 | 0.5 | LSb | -503 devices (50k), 5.5V (Note 4, Note 7) | 4 |
| Rheostat Differential Nonlinearity (50k device, 2.7V) | R-DNL | -0.5 | 0 | 0.5 | LSb | -503 devices (50k), 2.7V (Note 7) | 4 |
| High-Voltage Input Entry Voltage (Threshold for WiperLock) | VIHH | 9 | 12.5 | V | -40°C to +125°C | 5 | |
| High-Voltage Input Entry Voltage (Threshold for WiperLock) | VIHH | 8.5 | 12.5 | V | +7°C to +125°C | 5 | |
| Input Leakage Current | IIL | -1 | 1 | µA | VIN = VDD | 5 | |
| Supply Current | IDD | 0.3 | 1 | µA | Serial Interface Inactive (CS = VIH, U/D = VIH) | 2 | |
| Supply Current | IDD | 45 | µA | 5.5V, CS = VSS, fU/D = 1 MHz | 2 | ||
| Supply Current | IDD | 15 | µA | 2.7V, CS = VSS, fU/D = 1 MHz | 2 | ||
| Power Supply Sensitivity (MCP4011 and MCP4013 only) | PSS | 0.0015 | 0.0035 | %/% | VDD = 4.5V to 5.5V, VA = 4.5V, Code = 1Fh | 5 | |
| CS Low Time | tCSLO | 5 | µs | 6 | |||
| CS High Time | tCSHI | 500 | ns | 2.7V <= VDD <= 5.5V | 6 | ||
| U/D to CS Hold Time | tLUC | 500 | ns | 2.7V <= VDD <= 5.5V | 6 | ||
| U/D to CS Hold Time | tLUC | 750 | ns | 1.8V <= VDD < 2.7V | 6 | ||
| CS to U/D Low Setup Time | tLCUF | 500 | ns | 6 | |||
| CS to U/D High Setup Time | tLCUR | 3 | µs | 6 | |||
| U/D High Time | tHI | 500 | ns | 6 | |||
| U/D Low Time | tLO | 500 | ns | 6 | |||
| Up/Down Toggle Frequency | fUD | 1 | MHz | 6 | |||
| Wiper Settling Time (50k) | tS | 5 | µs | 50 k CL = 100 pF | 6 | ||
| Wiper Response on Power-Up | tPU | 200 | ns | 6 | |||
| CS Pull-Up/Pull-Down Resistance | RCS | 16 | k | VDD = 5.5V, VCS = 3V | 5 | ||
| CS Weak Pull-Up/Pull-Down Current | IPU | 170 | µA | VDD = 5.5V, VCS = 3V | 5 | ||
| CS and U/D Pin Capacitance | CIN, COUT | 10 | pF | fC = 1 MHz | 5 | ||
| Leakage current into A, W or B (MCP4011) | IWL | 100 | nA | MCP4011 A = W = B = VSS | 3 | ||
| Capacitance (PA) | CAW | 75 | pF | f = 1 MHz, code = 1Fh | 3 | ||
| Capacitance (Pw) | CW | 120 | pF | f = 1 MHz, code = 1Fh | 3 | ||
| Capacitance (PB) | CBW | 75 | pF | f = 1 MHz, code = 1Fh | 3 | ||
| Bandwidth -3 dB (50k device) | BW | 200 | kHz | -503 devices, code = 1F, output load = 30 pF | 3 | ||
| Step Resistance (50k, typical) | RS | 793.65 | ohm | MCP401X-503E typical step resistance (Table 6-1) | 38 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| Thermal Resistance, 8L-SOIC | θJA | 163 | °C/W | 10 | |||
| VDD supply voltage (absolute maximum) | VDD | 6.5 | V | 2 | |||
| CS and U/D inputs w.r.t VSS | VCS, VU/D | -0.3 | 12.5 | V | 2 | ||
| A, B and W terminals w.r.t VSS | VA, VB, VW | -0.3 | V | Upper limit VDD + 0.3V | 2 | ||
| Current at Input Pins | -10 | 10 | mA | 2 | |||
| Current at Supply Pins | -10 | 10 | mA | 2 | |||
| Current at Potentiometer Pins | -2.5 | 2.5 | mA | 2 | |||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Ambient temperature with power applied | -55 | 125 | °C | 2 | |||
| Maximum Junction Temperature (TJ) | TJ | 150 | °C | 2 | |||
| ESD protection on all pins (HBM) | 4 | kV | HBM | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 61 |
CAD (KiCad official)
- Symbol:
MCP4011-503E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp4011-503e-etched.step/mcp4011-503e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4011-503e.step/mcp4011-503e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (70 pp, sha256
35f77d044fe80869, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP4011-503E
**Microchip Tech** · Digital Potentiometers · SOIC-8
MCP4011-503E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply input, operating from 1.8V to 5.5V relative to VSS, with a decoupling capacitor on VDD to VSS recommended for maximum performance. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | A | passive | Potentiometer terminal A, which must be held between VSS and VDD and can carry both positive and negative current. |
| 4 | W | passive | Potentiometer wiper terminal, which must be held between VSS and VDD and can carry both positive and negative current. |
| 5 | CS | input | Chip select input: forcing VIL enables serial commands, forcing VIHH enables high-voltage serial commands, and it has an internal pull-up that holds it at VIH when floating. |
| 6 | B | passive | Potentiometer terminal B, which must be held between VSS and VDD and can carry both positive and negative current. |
| 7 | NC | unconnected | No connection. |
| 8 | U/D | input | TTL-compatible increment/decrement input that moves the wiper one step toward terminal A on increment and one step toward terminal B on decrement. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | | 5.5 | V | | 2 |
| Resistance (end-to-end, -503 device) | RAB | 40 | 50 | 60 | k | -503 devices (Note 1) | 2 |
| Resistance tolerance (-503 device) | | -20 | | 20 | % | Printed as (±20%) for RAB | 2 |
| Wiper Resistance | RW | | 75 | 125 | ohm | 5.5V (Note 3, Note 4) | 3 |
| Wiper Resistance | RW | | 75 | 325 | ohm | 2.7V (Note 3, Note 4) | 3 |
| Full-Scale Error (MCP4011/13 only) | VWFSE | -0.5 | -0.1 | 0.5 | LSb | Code 3Fh, 2.7V to 5.5V VDD | 3 |
| Zero-Scale Error (MCP4011/13 only) | VWZSE | -0.5 | 0.1 | 0.5 | LSb | Code 00h, 2.7V to 5.5V VDD | 3 |
| Current through A, W or B | IW | | | 2.5 | mA | Note 6 | 3 |
| Nominal Resistance Tempco (-20 to +70 C) | R/T | | 50 | | ppm/°C | TA = -20°C to +70°C | 3 |
| Nominal Resistance Tempco (-40 to +85 C) | R/T | | 100 | | ppm/°C | TA = -40°C to +85°C | 3 |
| Nominal Resistance Tempco (-40 to +125 C) | R/T | | 150 | | ppm/°C | TA = -40°C to +125°C | 3 |
| Ratiometric Tempco (MCP4011 and MCP4013 only) | VWA/T | | 10 | | ppm/°C | MCP4011 and MCP4013 only, code = 1Fh | 3 |
| Potentiometer Integral Nonlinearity (MCP4011/13 only) | INL | -0.5 | 0.25 | 0.5 | LSb | MCP4011/13 only (Note 2) | 4 |
| Potentiometer Differential Nonlinearity (MCP4011/13 only) | DNL | -0.5 | 0.25 | 0.5 | LSb | MCP4011/13 only (Note 2) | 4 |
| Rheostat Integral Nonlinearity (50k device, 5.5V) | R-INL | -0.5 | 0.25 | 0.5 | LSb | -503 devices (50k), 5.5V (Note 4, Note 7) | 4 |
| Rheostat Integral Nonlinearity (50k device, 2.7V) | R-INL | -1 | 0.25 | 1 | LSb | -503 devices (50k), 2.7V (Note 7) | 4 |
| Rheostat Differential Nonlinearity (50k device, 5.5V) | R-DNL | -0.5 | 0.25 | 0.5 | LSb | -503 devices (50k), 5.5V (Note 4, Note 7) | 4 |
| Rheostat Differential Nonlinearity (50k device, 2.7V) | R-DNL | -0.5 | 0 | 0.5 | LSb | -503 devices (50k), 2.7V (Note 7) | 4 |
| High-Voltage Input Entry Voltage (Threshold for WiperLock) | VIHH | 9 | | 12.5 | V | -40°C to +125°C | 5 |
| High-Voltage Input Entry Voltage (Threshold for WiperLock) | VIHH | 8.5 | | 12.5 | V | +7°C to +125°C | 5 |
| Input Leakage Current | IIL | -1 | | 1 | µA | VIN = VDD | 5 |
| Supply Current | IDD | | 0.3 | 1 | µA | Serial Interface Inactive (CS = VIH, U/D = VIH) | 2 |
| Supply Current | IDD | | 45 | | µA | 5.5V, CS = VSS, fU/D = 1 MHz | 2 |
| Supply Current | IDD | | 15 | | µA | 2.7V, CS = VSS, fU/D = 1 MHz | 2 |
| Power Supply Sensitivity (MCP4011 and MCP4013 only) | PSS | | 0.0015 | 0.0035 | %/% | VDD = 4.5V to 5.5V, VA = 4.5V, Code = 1Fh | 5 |
| CS Low Time | tCSLO | 5 | | | µs | | 6 |
| CS High Time | tCSHI | 500 | | | ns | 2.7V <= VDD <= 5.5V | 6 |
| U/D to CS Hold Time | tLUC | 500 | | | ns | 2.7V <= VDD <= 5.5V | 6 |
| U/D to CS Hold Time | tLUC | 750 | | | ns | 1.8V <= VDD < 2.7V | 6 |
| CS to U/D Low Setup Time | tLCUF | 500 | | | ns | | 6 |
| CS to U/D High Setup Time | tLCUR | 3 | | | µs | | 6 |
| U/D High Time | tHI | 500 | | | ns | | 6 |
| U/D Low Time | tLO | 500 | | | ns | | 6 |
| Up/Down Toggle Frequency | fUD | | | 1 | MHz | | 6 |
| Wiper Settling Time (50k) | tS | 5 | | | µs | 50 k CL = 100 pF | 6 |
| Wiper Response on Power-Up | tPU | | 200 | | ns | | 6 |
| CS Pull-Up/Pull-Down Resistance | RCS | | 16 | | k | VDD = 5.5V, VCS = 3V | 5 |
| CS Weak Pull-Up/Pull-Down Current | IPU | | 170 | | µA | VDD = 5.5V, VCS = 3V | 5 |
| CS and U/D Pin Capacitance | CIN, COUT | | 10 | | pF | fC = 1 MHz | 5 |
| Leakage current into A, W or B (MCP4011) | IWL | | 100 | | nA | MCP4011 A = W = B = VSS | 3 |
| Capacitance (PA) | CAW | | 75 | | pF | f = 1 MHz, code = 1Fh | 3 |
| Capacitance (Pw) | CW | | 120 | | pF | f = 1 MHz, code = 1Fh | 3 |
| Capacitance (PB) | CBW | | 75 | | pF | f = 1 MHz, code = 1Fh | 3 |
| Bandwidth -3 dB (50k device) | BW | | 200 | | kHz | -503 devices, code = 1F, output load = 30 pF | 3 |
| Step Resistance (50k, typical) | RS | | 793.65 | | ohm | MCP401X-503E typical step resistance (Table 6-1) | 38 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 10 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 10 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 10 |
| Thermal Resistance, 8L-SOIC | θJA | | 163 | | °C/W | | 10 |
| VDD supply voltage (absolute maximum) | VDD | | | 6.5 | V | | 2 |
| CS and U/D inputs w.r.t VSS | VCS, VU/D | -0.3 | | 12.5 | V | | 2 |
| A, B and W terminals w.r.t VSS | VA, VB, VW | -0.3 | | | V | Upper limit VDD + 0.3V | 2 |
| Current at Input Pins | | -10 | | 10 | mA | | 2 |
| Current at Supply Pins | | -10 | | 10 | mA | | 2 |
| Current at Potentiometer Pins | | -2.5 | | 2.5 | mA | | 2 |
| Storage temperature | | -65 | | 150 | °C | | 2 |
| Ambient temperature with power applied | | -55 | | 125 | °C | | 2 |
| Maximum Junction Temperature (TJ) | TJ | | | 150 | °C | | 2 |
| ESD protection on all pins (HBM) | | | | 4 | kV | HBM | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 61 |
## CAD (KiCad official)
- Symbol: `MCP4011-503E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mcp4011-503e-etched.step` / `mcp4011-503e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp4011-503e.step` / `mcp4011-503e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp4011-503e-datasheet.pdf) (70 pp, sha256 `35f77d044fe80869`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp4011-503e-datasheet.pdf)