main
History Download
Ray Publish 0.1.0 34553a6

MCP4011-103E

Microchip Tech · Digital Potentiometers · SOIC-8

MCP4011-103E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive power supply input, referenced to VSS, operating from 1.8V to 5.5V, with a decoupling capacitor on VDD to VSS recommended for maximum performance.
2 VSS power_in Ground reference for the device.
3 A passive Potentiometer terminal A is the fixed connection to the 0x3F terminal, and its voltage must be between VSS and VDD.
4 W passive Potentiometer wiper terminal supports both positive and negative current, and its voltage must be between VSS and VDD.
5 CS input Chip select input: driving CS to VIL enables serial commands, and CS has an internal pull-up that pulls it to VIH when floating.
6 B passive Potentiometer terminal B is the fixed connection to the 0x00 terminal, and its voltage must be between VSS and VDD.
7 NC unconnected No connection.
8 U/D input TTL-compatible increment/decrement input that moves the wiper one step toward terminal A when incrementing and toward terminal B when decrementing.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resistance tolerance RAB -20 20 % ±20%, -103 device 2
Resistance (end-to-end) RAB 8 10 12 k -103 devices (Note 1) 2
Operating voltage range VDD 2.7 5.5 V 2
Absolute maximum VDD VDD 6.5 V 2
CS and U/D inputs w.r.t VSS -0.3 12.5 V 2
Current at input pins -10 10 mA 2
Current at supply pins -10 10 mA 2
Current at potentiometer pins -2.5 2.5 mA 2
Storage temperature -65 150 °C 2
Ambient temperature with power applied -55 125 °C 2
Maximum junction temperature TJ 150 °C 2
Specified temperature range TA -40 125 °C 10
Operating temperature range TA -40 125 °C 10
Thermal resistance, 8L-SOIC θJA 163 °C/W 10
Wiper resistance RW 70 125 Ω 5.5V (Note 3, Note 4) 3
Wiper resistance RW 70 325 Ω 2.7V (Note 3, Note 4) 3
Full-scale error (MCP4011/13 only) VWFSE -0.5 -0.1 0.5 LSb Code 3Fh, 2.7V ≤ VDD ≤ 5.5V 3
Zero-scale error (MCP4011/13 only) VWZSE -0.5 0.1 0.5 LSb Code 00h, 2.7V ≤ VDD ≤ 5.5V 3
Current through A, W or B IW 2.5 mA Note 6 3
Potentiometer integral nonlinearity (MCP4011/13 only) INL -0.5 0.25 0.5 LSb MCP4011/13 only (Note 2) 4
Potentiometer differential nonlinearity (MCP4011/13 only) DNL -0.5 0.25 0.5 LSb MCP4011/13 only (Note 2) 4
Rheostat integral nonlinearity, 10 k device at 5.5V R-INL -3 1 3 LSb -103 devices (10 k), 5.5V (Note 7) 4
Rheostat differential nonlinearity, 10 k device at 5.5V R-DNL -1 0 1 LSb -103 devices (10 k), 5.5V (Note 7) 4
Input high-voltage entry threshold (WiperLock) VIHH 8.5 12.5 V +7°C to +125°C 5
Input high-voltage entry threshold (WiperLock) VIHH 9 12.5 V -40°C to +125°C 5
Input leakage current IIL -1 1 µA VIN = VDD 5
Power supply sensitivity (MCP4011 and MCP4013 only) PSS 0.0015 0.0035 %/% VDD = 4.5V to 5.5V, VA = 4.5V, Code = 1Fh 5
CS low time tCSLO 5 µs 6
CS high time tCSHI 500 ns 2.7V ≤ VDD ≤ 5.5V 6
U/D to CS hold time tLUC 500 ns 2.7V ≤ VDD ≤ 5.5V 6
CS to U/D low setup time tLCUF 500 ns 6
CS to U/D high setup time tLCUR 3 µs 6
U/D high time tHI 500 ns 6
U/D low time tLO 500 ns 6
Up/down toggle frequency fUD 1 MHz 6
Wiper settling time, 10 k device tS 2 µs 10 k, CL = 100 pF 6
Supply current, serial interface inactive IDD 0.3 1 µA Serial interface inactive (CS = VIH, U/D = VIH) 2
Supply current at 5.5V IDD 45 µA 5.5V, CS = VSS, fU/D = 1 MHz 2
Supply current at 2.7V IDD 15 µA 2.7V, CS = VSS, fU/D = 1 MHz 2
Bandwidth -3 dB, 10 k device BW 1 MHz -103 devices, Code = 1F, output load = 30 pF 3
Nominal resistance tempco R/T 50 ppm/°C TA = -20°C to +70°C 3
Nominal resistance tempco R/T 100 ppm/°C TA = -40°C to +85°C 3
Nominal resistance tempco R/T 150 ppm/°C TA = -40°C to +125°C 3
Ratiometric tempco (MCP4011 and MCP4013 only) VWA/T 10 ppm/°C Code = 1Fh 3
Leakage current into A, W or B (MCP4011) IWL 100 nA MCP4011 A = W = B = VSS 3
Capacitance (PA) CAW 75 pF f = 1 MHz, code = 1Fh 3
Capacitance (PW) CW 120 pF f = 1 MHz, code = 1Fh 3
Capacitance (PB) CBW 75 pF f = 1 MHz, code = 1Fh 3
CS pull-up/pull-down resistance RCS 16 kΩ VDD = 5.5V, VCS = 3V 5
CS weak pull-up/pull-down current IPU 170 µA VDD = 5.5V, VCS = 3V 5
CS and U/D pin capacitance CIN, COUT 10 pF fC = 1 MHz, VDD ≤ 2.7V 5
Wiper response on power-up tPU 200 ns 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 61

CAD (KiCad official)

  • Symbol: MCP4011-103E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp4011-103e-etched.step / mcp4011-103e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4011-103e.step / mcp4011-103e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (70 pp, sha256 35f77d044fe80869, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus off (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF