Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP3914A1T-E

Microchip Tech · Battery Management ICs · UQFN-40-EP(5x5)

MCP3914A1T-E from Microchip Tech, in a UQFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CH2+ input Noninverting analog input pin for ADC channel 2, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
2 CH2- input Inverting analog input pin for ADC channel 2, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
3 CH3- input Inverting analog input pin for ADC channel 3, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
4 CH3+ input Noninverting analog input pin for ADC channel 3, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
5 NC unconnected No connect pin.
6 NC unconnected No connect pin.
7 CH4+ input Noninverting analog input pin for ADC channel 4, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
8 CH4- input Inverting analog input pin for ADC channel 4, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
9 CH5- input Inverting analog input pin for ADC channel 5, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
10 CH5+ input Noninverting analog input pin for ADC channel 5, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
11 CH6+ input Noninverting analog input pin for ADC channel 6, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
12 CH6- input Inverting analog input pin for ADC channel 6, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
13 CH7- input Inverting analog input pin for ADC channel 7, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
14 CH7+ input Noninverting analog input pin for ADC channel 7, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
15 REFIN+/OUT passive Noninverting voltage reference input for all ADCs or internal voltage reference output, which has minimal drive capability and needs buffering and a 0.1 µF ceramic bypass capacitor if used as a voltage source.
16 REFIN- input Inverting voltage reference input for all ADCs, to be connected to AGND when using the internal reference (VREFEXT = 0) or a single-ended reference.
17 AGND power_in Analog ground pin, the return path for internal analog circuitry, to be connected together and to the same ground node as DGND.
18 AVDD power_in Analog power supply pin, which should be maintained between 2.7V and 3.6V for specified operation.
19 NC unconnected No connect pin.
20 DVDD power_in Digital power supply pin, which should be maintained between 2.7V and 3.6V for specified operation.
21 DGND power_in Digital ground pin, the return path for internal digital circuitry.
22 DR output Data Ready signal output pin, which outputs an active-low pulse with a width equal to half a DMCLK period at the end of a channel conversion.
23 NC unconnected No connect pin.
24 DGND power_in Digital ground pin, the return path for internal digital circuitry.
25 OSC1/CLKI input Oscillator crystal connection pin or external clock input.
26 OSC2 output Oscillator crystal connection pin.
27 CS input Serial interface chip select pin.
28 SCK input Serial interface clock input pin.
29 SDO output Serial interface data output pin.
30 SDI input Serial interface data input pin.
31 RESET input Master reset logic input pin.
32 DGND power_in Digital ground pin, the return path for internal digital circuitry.
33 DVDD power_in Digital power supply pin, which should be maintained between 2.7V and 3.6V for specified operation.
34 NC unconnected No connect pin.
35 AVDD power_in Analog power supply pin, which should be maintained between 2.7V and 3.6V for specified operation.
36 AGND power_in Analog ground pin, the return path for internal analog circuitry, to be connected together and to the same ground node as DGND.
37 CH0+ input Noninverting analog input pin for ADC channel 0, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
38 CH0- input Inverting analog input pin for ADC channel 0, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
39 CH1- input Inverting analog input pin for ADC channel 1, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
40 CH1+ input Noninverting analog input pin for ADC channel 1, with the differential range of ±600 mV/Gain at VREF = 1.2V and absolute voltage to AGND of ±1V without distortion.
41 EP passive Exposed thermal pad, which must be connected to AGND or left floating.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package UQFN-40-EP(5x5)
Category Power Supply Chip
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resolution (no missing codes) 24 bits OSR = 256 or greater 3
Sampling Frequency fS(DMCLK) 1 4 MHz For maximum condition, BOOST[1:0] = 11 3
Output Data Rate fD(DRCLK) 4 125 ksps For maximum condition, BOOST[1:0] = 11, OSR = 32 3
Analog Input Absolute Voltage on CHn+/- Pins CHn+/- -1 1 V All analog input channels, measured to AGND 3
Analog Input Leakage Current IIN -1 1 nA RESET[7:0] = 11111111, MCLK running continuously 3
Offset Error VOS -2 0.2 2 mV Note 5 3
Gain Error GE -6 6 % Note 5 4
Differential Input Impedance G = 1 ZIN 232 k G = 1, proportional to 1/AMCLK 4
Differential Input Impedance G = 2 ZIN 142 k G = 2, proportional to 1/AMCLK 4
Differential Input Impedance G = 4 ZIN 72 k G = 4, proportional to 1/AMCLK 4
Differential Input Impedance G = 8 ZIN 38 k G = 8, proportional to 1/AMCLK 4
Differential Input Impedance G = 16 ZIN 36 k G = 16, proportional to 1/AMCLK 4
Differential Input Impedance G = 32 ZIN 33 k G = 32, proportional to 1/AMCLK 4
Signal-to-Noise and Distortion Ratio SINAD 92 94.5 dB Note 1 4
Total Harmonic Distortion THD -107 -103 dBc Includes the first 35 harmonics 4
Signal-to-Noise Ratio SNR 92 95 dB Note 1 4
Internal Voltage Reference Tolerance VREF 1.176 1.2 1.224 V VREFEXT = 0, TA = +25°C only 5
Differential Input Voltage Range (VREF+, VREF-) VREF 1.1 1.3 V VREFEXT = 1 5
Absolute Voltage REFIN- Pin VREF- -0.1 0.1 V REFIN- should be connected to AGND when VREFEXT = 0 5
Voltage Reference Input Capacitance 10 pF 5
Master Clock Input Frequency Range fMCLK 20 MHz CLKEXT = 1 (Note 7) 5
Crystal Oscillator Operating Frequency Range fXTAL 1 20 MHz CLKEXT = 0 (Note 7) 5
Analog Master Clock AMCLK 16 MHz Note 7 5
Operating Voltage, Analog AVDD 2.7 3.6 V 5
Operating Voltage, Digital DVDD 2.7 3.6 V 5
Operating Current, Analog BOOST 00 IDD,A 5.8 7.5 mA BOOST[1:0] = 00 (Note 2) 5
Operating Current, Analog BOOST 01 IDD,A 7.2 10 mA BOOST[1:0] = 01 (Note 2) 5
Operating Current, Analog BOOST 10 IDD,A 9.8 12.5 mA BOOST[1:0] = 10 (Note 2) 5
Operating Current, Analog BOOST 11 IDD,A 17.2 22 mA BOOST[1:0] = 11 (Note 2) 5
Operating Current, Digital IDD,D 0.65 1.1 mA MCLK = 4 MHz, proportional to MCLK (Note 2) 6
Shutdown Current, Analog IDDS,A 0.01 2 µA AVDD pin only (Note 3) 6
Shutdown Current, Digital IDDS,D 0.01 7 µA DVDD pin only (Note 3) 6
Input Leakage Current ILI -1 1 µA CS = DVDD, VIN = DGND to DVDD 6
Output Leakage Current ILO -1 1 µA CS = DVDD, VOUT = DGND or DVDD 6
Internal Capacitance (all inputs and outputs) CINT 7 pF TA = +25°C, SCK = 1.0 MHz, DVDD = 3.3V (Note 1) 6
Serial Clock Frequency fSCK 20 MHz 7
CS Setup Time tCSS 25 ns 7
CS Hold Time tCSH 50 ns 7
CS Disable Time tCSD 50 ns 7
Data Setup Time tSU 5 ns 7
Data Hold Time tHD 10 ns 7
Serial Clock High Time tHI 20 ns 7
Serial Clock Low Time tLO 20 ns 7
Serial Clock Delay Time tCLD 50 ns 7
Serial Clock Enable Time tCLE 50 ns 7
Output Valid from SCK Low tDO 25 ns 7
Output Hold Time tHO 0 ns Note 1 7
Output Disable Time tDIS 25 ns Note 1 7
Reset Pulse Width (RESET) tMCLR 100 ns 7
Data Transfer Time to DR (Data Ready) tDODR 25 ns Note 2 7
Modulator Mode Entry to Modulator Data Present tMODSU 100 ns 7
Operating Temperature Range TA -40 125 °C Note 1 7
Storage Temperature Range TA -65 150 °C 7
Thermal Resistance, 40-Lead 5x5 UQFN JA 41 °C/W 7
VDD VDD -0.3 4 V 3
Digital inputs and outputs w.r.t. AGND -0.3 4 V 3
Analog input w.r.t. AGND -2 2 V 3
Storage temperature -65 150 °C 3
Ambient temp. with power applied -65 125 °C 3

CAD (KiCad official)

  • Symbol: MCP3914A1T-E
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: UQFN-40-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: mcp3914a1t-e-etched.step / mcp3914a1t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3914a1t-e.step / mcp3914a1t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (82 pp, sha256 7f3bc8404aa46134, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF