main
Ray
Publish 0.1.0
fd37595
MCP3910A1-E
Microchip Tech · Battery Management ICs · SSOP-20-208mil
MCP3910A1-E from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET/OSR0 | input | Active-low Schmitt-trigger master reset input in SPI mode (resets all registers to default when low), or OSR0 logic select input in Two-Wire Interface mode. |
| 2 | DVDD | power_in | Digital power supply, to be maintained between 2.7V and 3.6V and bypassed with typically 10 µF in parallel with 0.1 µF ceramic. |
| 3 | AVDD | power_in | Analog power supply, to be maintained between 2.7V and 3.6V and bypassed with typically 10 µF in parallel with 0.1 µF ceramic. |
| 4 | CH0+ | input | Noninverting analog input for Channel 0, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 5 | CH0- | input | Inverting analog input for Channel 0, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 6 | CH1- | input | Inverting analog input for Channel 1, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 7 | CH1+ | input | Noninverting analog input for Channel 1, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 8 | AGND | power_in | Analog ground, return path for internal analog circuitry, recommended to connect to the same ground node as DGND, preferably with a star connection. |
| 9 | REFIN+/OUT | bidirectional | Noninverting voltage reference input (when VREFEXT = 1) or internal reference output (when VREFEXT = 0) with minimal drive capability; a 0.1 µF ceramic capacitor is sufficient in most cases. |
| 10 | REFIN- | input | Inverting voltage reference input, connected directly to AGND when using a single-ended external reference or the internal reference. |
| 11 | DGND | power_in | Digital ground, return path for internal digital circuitry, recommended to connect to the same ground node as AGND, preferably with a star connection. |
| 12 | MDAT1 | output | Modulator data output for Channel 1. |
| 13 | MDAT0 | output | Modulator data output for Channel 0. |
| 14 | DR/GAIN1 | bidirectional | Active-low data ready pulse output (high-impedance or logic high when inactive per DR_HIZ), or GAIN1 logic input in Two-Wire Interface mode. |
| 15 | OSC1/CLKI/GAIN0 | input | Oscillator crystal connection, external clock input, or GAIN0 logic input. |
| 16 | OSC2/MODE | bidirectional | Oscillator crystal connection or serial interface mode logic input. |
| 17 | CS/BOOST | input | Serial interface chip select input or BOOST logic input. |
| 18 | SCK/MCLK | input | Serial interface clock input (up to 20 MHz SPI) or master clock input. |
| 19 | SDO | output | Serial interface data output (high-impedance during continuous write communication); the pin table misprints it as 'Data Input Pin'. |
| 20 | SDI/OSR1 | input | Serial interface data input or OSR1 logic input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Power Supply Chip |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
MCP3910A1-E - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
mcp3910a1-e-etched.step/mcp3910a1-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3910a1-e.step/mcp3910a1-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (90 pp, sha256
d7c281d662a72776, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP3910A1-E
**Microchip Tech** · Battery Management ICs · SSOP-20-208mil
MCP3910A1-E from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET/OSR0 | input | Active-low Schmitt-trigger master reset input in SPI mode (resets all registers to default when low), or OSR0 logic select input in Two-Wire Interface mode. |
| 2 | DVDD | power_in | Digital power supply, to be maintained between 2.7V and 3.6V and bypassed with typically 10 µF in parallel with 0.1 µF ceramic. |
| 3 | AVDD | power_in | Analog power supply, to be maintained between 2.7V and 3.6V and bypassed with typically 10 µF in parallel with 0.1 µF ceramic. |
| 4 | CH0+ | input | Noninverting analog input for Channel 0, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 5 | CH0- | input | Inverting analog input for Channel 0, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 6 | CH1- | input | Inverting analog input for Channel 1, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 7 | CH1+ | input | Noninverting analog input for Channel 1, linear over ±600 mV/GAIN differential with VREF = 1.2V and ±1V absolute with respect to AGND with no distortion. |
| 8 | AGND | power_in | Analog ground, return path for internal analog circuitry, recommended to connect to the same ground node as DGND, preferably with a star connection. |
| 9 | REFIN+/OUT | bidirectional | Noninverting voltage reference input (when VREFEXT = 1) or internal reference output (when VREFEXT = 0) with minimal drive capability; a 0.1 µF ceramic capacitor is sufficient in most cases. |
| 10 | REFIN- | input | Inverting voltage reference input, connected directly to AGND when using a single-ended external reference or the internal reference. |
| 11 | DGND | power_in | Digital ground, return path for internal digital circuitry, recommended to connect to the same ground node as AGND, preferably with a star connection. |
| 12 | MDAT1 | output | Modulator data output for Channel 1. |
| 13 | MDAT0 | output | Modulator data output for Channel 0. |
| 14 | DR/GAIN1 | bidirectional | Active-low data ready pulse output (high-impedance or logic high when inactive per DR_HIZ), or GAIN1 logic input in Two-Wire Interface mode. |
| 15 | OSC1/CLKI/GAIN0 | input | Oscillator crystal connection, external clock input, or GAIN0 logic input. |
| 16 | OSC2/MODE | bidirectional | Oscillator crystal connection or serial interface mode logic input. |
| 17 | CS/BOOST | input | Serial interface chip select input or BOOST logic input. |
| 18 | SCK/MCLK | input | Serial interface clock input (up to 20 MHz SPI) or master clock input. |
| 19 | SDO | output | Serial interface data output (high-impedance during continuous write communication); the pin table misprints it as 'Data Input Pin'. |
| 20 | SDI/OSR1 | input | Serial interface data input or OSR1 logic input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Power Supply Chip |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `MCP3910A1-E`
- Footprint: `Package_SO:SSOP-20_5.3x7.2mm_P0.65mm`
- 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files: `mcp3910a1-e-etched.step` / `mcp3910a1-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp3910a1-e.step` / `mcp3910a1-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp3910a1-e-datasheet.pdf) (90 pp, sha256 `d7c281d662a72776`, retrieved 2026-10-26, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp3910a1-e-datasheet.pdf)