main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp3906at-i-ss: viewers · Ray
mcp3906at-i-ss-etched.glb Publish 0.1.0 · Ray
mcp3906at-i-ss-etched.step mcp3906at-i-ss: factory component page (tier=mfr) · Ray
mcp3906at-i-ss-hero.glb mcp3906at-i-ss: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp3906at-i-ss-hero.overlay.json Publish 0.1.1 · Ray
mcp3906at-i-ss.glb Publish 0.1.0 · Ray
mcp3906at-i-ss.kicad_mod Publish 0.1.0 · Ray
mcp3906at-i-ss.kicad_sym Publish 0.1.0 · Ray
mcp3906at-i-ss.lbr Publish 0.1.1 · Ray
mcp3906at-i-ss.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
verification.json Verified: Rebuilt by the parts factory: tier mfr, 24 pins · Ray

MCP3906AT-I

Microchip Tech · Energy Metering ICs · SSOP-24-208mil

MCP3906AT-I from Microchip Tech, in a SSOP-24-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVDD power_in Digital power supply pin for the digital circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors.
2 HPF input Logic input controlling the high-pass filters on both channels: logic 1 enables them to remove DC offset, and logic 0 disables them to allow DC voltages to be measured.
3 AVDD power_in Analog power supply pin for the analog circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors.
4 NC unconnected No connect.
5 CH0+ input Non-inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage.
6 CH0- input Inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage.
7 CH1- input Inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage.
8 CH1+ input Non-inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage.
9 MCLR input Master clear logic input; a logic 0 resets all digital registers, the SINC filters and accumulators, and holds both ADCs in reset with output at 0x0000h.
10 REFIN/OUT bidirectional Output of the internal 2.4 V reference (typical tempco 15 ppm/°C, tolerance ±2%) that can be overdriven by an external reference within 2.2 V to 2.6 V, and requires bypass capacitors to AGND.
11 AGND power_in Analog ground return for the ADCs, PGA, band gap reference and POR, which must be connected to the same ground as DGND.
12 F2 input Logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0.
13 F1 input Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F0.
14 F0 input Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F1.
15 G1 input Logic input that selects the Channel 0 PGA gain together with G0 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A).
16 G0 input Logic input that selects the Channel 0 PGA gain together with G1 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A).
17 OSC1 input Oscillator crystal connection or clock input; typical clock 3.579545 MHz, with the clock usable from 1 MHz to 4 MHz without disturbing measurement error.
18 OSC2 output Oscillator crystal connection or clock output, with appropriate load capacitance required for proper operation.
19 NC unconnected No connect.
20 NEG output Negative power logic output that goes to logic 1 when the phase difference between channels exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT and held until real power becomes positive again.
21 DGND power_in Digital ground return for the SINC filters, multiplier, HPF, LPF, digital-to-frequency converter and oscillator, which must be connected to the same ground as AGND.
22 HFOUT output High-frequency periodic pulse output whose period is proportional to instantaneous real power and the HFC constant, intended for meter calibration.
23 FOUT1 output Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors.
24 FOUT0 output Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-24-208mil
Category ADC/DAC/Data Conversion
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage (AVDD, DVDD) 4.5 5.5 V AVDD, DVDD 4
Analog supply current (AVDD pin) IDD,A 2.7 3 mA AVDD pin only 4
Digital supply current (DVDD pin) IDD,D 1.2 2 mA DVDD pin only 4
Specified Temperature Range (industrial, -I) TA -40 85 °C 4
Storage Temperature Range TA -65 150 °C 4
Ambient temp. with power applied -65 125 °C 3
VDD (supply voltage) VDD 7 V 3
Analog input w.r.t. AGND -6 6 V 3
Digital inputs and outputs w.r.t. AGND (lower limit) -0.6 V 3
VREF input w.r.t. AGND (lower limit) -0.6 V 3
Soldering temperature of leads 300 °C 10 seconds 3
ESD on the analog inputs (HBM) 5 kV HBM 3
ESD on the analog inputs (MM) 500 V MM 3
ESD on all other pins (HBM) 5 kV HBM 3
ESD on all other pins (MM) 500 V MM 3
System Gain Error 3 10 % FOUT Note 2, Note 5 3
Offset Error VOS 2 5 mV Referred to Input 3
Internal Voltage Reference Tolerance -2 2 % 3
Reference Input Range 2.2 2.6 V 4
Reference Input Impedance 3.2 kΩ 4
Reference Input Capacitance 10 pF 4
Maximum Signal Level -1 1 V CH0+,CH0-,CH1+,CH1- to AGND 4
Differential Input Voltage Range Channel 1 -660 660 mV 4
Analog Input Impedance 390 kΩ Proportional to 1/MCLK frequency 4
Oscillator Input Frequency Range MCLK 1 4 MHz 4
Digital High-Level Input Voltage VIH 2.4 V DVDD = 5.0V 5
Digital Low-Level Input Voltage VIL 0.85 V DVDD = 5.0V 5
Input Leakage Current -3 3 µA VIN = 0, VIN = DVDD 5
Pin Capacitance 10 pF Note 3 5
FOUT0 and FOUT1 Output High Voltage VOH 4.5 V VIOH = 10 mA, DVDD = 5.0V 5
FOUT0 and FOUT1 Output Low Voltage VOL 0.5 V IOL = 10 mA, DVDD = 5.0V 5
HFOUT Output High Voltage VOH 4 V VIOH = 5 mA, DVDD = 5.0V 5
HFOUT Output Low Voltage VOL 0.5 V IOL = 5 mA, DVDD = 5.0V 5

CAD (KiCad official)

  • Symbol: MCP3906AT-I
  • Footprint: Package_SO:SSOP-24_5.3x8.2mm_P0.65mm
  • 3D model: SSOP-24-208mil (KiCad packages3D, STEP)
  • 3D model files: mcp3906at-i-ss-etched.step / mcp3906at-i-ss-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3906at-i-ss.step / mcp3906at-i-ss.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 9b5d77f773b4132f, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF