← Commit history
Publish 0.1.1
5 files changed
+732−721
README.md+45−47@@ -8,30 +8,30 @@ MCP3906AT-I from Microchip Tech, in a SSOP-24-208mil. Pinout and pin description | Pin | Name | Type | Function | |---|---|---|---|-| 1 | DVDD | power_in | Digital power supply pin for the digital circuitry, to be maintained at 5V ±10% for specified operation. |-| 2 | HPF | input | Logic input controlling the high-pass filters on both channels: logic '1' enables the filters to remove DC offset, logic '0' disables them to allow DC voltages to be measured. |-| 3 | AVDD | power_in | Analog power supply pin for the analog circuitry, to be maintained at 5V ±10% for specified operation. |+| 1 | DVDD | power_in | Digital power supply pin for the digital circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors. |+| 2 | HPF | input | Logic input controlling the high-pass filters on both channels: logic 1 enables them to remove DC offset, and logic 0 disables them to allow DC voltages to be measured. |+| 3 | AVDD | power_in | Analog power supply pin for the analog circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors. | | 4 | NC | unconnected | No connect. |-| 5 | CH0+ | input | Non-inverting fully differential analog input for Channel 0 (current channel) with PGA; maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage. |-| 6 | CH0- | input | Inverting fully differential analog input for Channel 0 (current channel); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage. |-| 7 | CH1- | input | Inverting fully differential analog input for Channel 1 (voltage channel); maximum differential voltage ±660 mV and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage. |-| 8 | CH1+ | input | Non-inverting fully differential analog input for Channel 1 (voltage channel); maximum differential voltage ±660 mV and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage. |-| 9 | MCLR | input | Master clear logic input: a logic '0' resets all registers and holds both ADCs in reset with output at 0x0000h. |-| 10 | REFIN/OUT | bidirectional | Output of the internal 2.4V reference (±2% tolerance, 15 ppm/°C typical) that can be overdriven by an external reference within 2.2V to 2.6V, and requires bypass capacitors to AGND. |-| 11 | AGND | power_in | Analog ground return path for the internal analog circuitry, to be connected to the same ground as DGND. |-| 12 | F2 | input | Frequency control logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0. |-| 13 | F1 | input | Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F2 and F0. |-| 14 | F0 | input | Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F2 and F1. |-| 15 | G1 | input | Gain control logic input that selects the Channel 0 PGA gain together with G0. |-| 16 | G0 | input | Gain control logic input that selects the Channel 0 PGA gain together with G1. |-| 17 | OSC1 | input | Oscillator crystal connection or clock input; typical clock 3.579545 MHz, usable from 1 MHz to 4 MHz without disturbing measurement error. |-| 18 | OSC2 | output | Oscillator crystal connection or clock output; appropriate load capacitance should be connected to OSC1 and OSC2 for proper operation. |+| 5 | CH0+ | input | Non-inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage. |+| 6 | CH0- | input | Inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage. |+| 7 | CH1- | input | Inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage. |+| 8 | CH1+ | input | Non-inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage. |+| 9 | MCLR | input | Master clear logic input; a logic 0 resets all digital registers, the SINC filters and accumulators, and holds both ADCs in reset with output at 0x0000h. |+| 10 | REFIN/OUT | bidirectional | Output of the internal 2.4 V reference (typical tempco 15 ppm/°C, tolerance ±2%) that can be overdriven by an external reference within 2.2 V to 2.6 V, and requires bypass capacitors to AGND. |+| 11 | AGND | power_in | Analog ground return for the ADCs, PGA, band gap reference and POR, which must be connected to the same ground as DGND. |+| 12 | F2 | input | Logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0. |+| 13 | F1 | input | Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F0. |+| 14 | F0 | input | Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F1. |+| 15 | G1 | input | Logic input that selects the Channel 0 PGA gain together with G0 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A). |+| 16 | G0 | input | Logic input that selects the Channel 0 PGA gain together with G1 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A). |+| 17 | OSC1 | input | Oscillator crystal connection or clock input; typical clock 3.579545 MHz, with the clock usable from 1 MHz to 4 MHz without disturbing measurement error. |+| 18 | OSC2 | output | Oscillator crystal connection or clock output, with appropriate load capacitance required for proper operation. | | 19 | NC | unconnected | No connect. |-| 20 | NEG | output | Negative power logic output that goes to logic '1' when the phase difference between channels is greater than 90° (negative real power), synchronous with the rising edge of HFOUT. |-| 21 | DGND | power_in | Ground return path for the internal digital circuitry, to be connected to the same ground as AGND. |-| 22 | HFOUT | output | High-frequency logic output with pulse period proportional to instantaneous real power, intended for meter calibration; output high ≥4.0V and output low ≤0.5V at 5 mA with DVDD = 5.0V. |-| 23 | FOUT1 | output | Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and two-phase stepper motors (output high ≥4.5V and output low ≤0.5V at 10 mA with DVDD = 5.0V). |-| 24 | FOUT0 | output | Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and two-phase stepper motors (output high ≥4.5V and output low ≤0.5V at 10 mA with DVDD = 5.0V). |+| 20 | NEG | output | Negative power logic output that goes to logic 1 when the phase difference between channels exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT and held until real power becomes positive again. |+| 21 | DGND | power_in | Digital ground return for the SINC filters, multiplier, HPF, LPF, digital-to-frequency converter and oscillator, which must be connected to the same ground as AGND. |+| 22 | HFOUT | output | High-frequency periodic pulse output whose period is proportional to instantaneous real power and the HFC constant, intended for meter calibration. |+| 23 | FOUT1 | output | Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors. |+| 24 | FOUT0 | output | Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors. | ## Key specifications @@ -48,41 +48,39 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| System Gain Error | | | 3 | 10 | % | (Note 2, Note 5) | 3 |-| Offset Error (ADC/PGA) | VOS | | 2 | 5 | mV | Referred to Input | 3 |+| Operating Voltage (AVDD, DVDD) | | 4.5 | | 5.5 | V | AVDD, DVDD | 4 |+| Analog supply current (AVDD pin) | IDD,A | | 2.7 | 3 | mA | AVDD pin only | 4 |+| Digital supply current (DVDD pin) | IDD,D | | 1.2 | 2 | mA | DVDD pin only | 4 |+| Specified Temperature Range (industrial, -I) | TA | -40 | | 85 | °C | | 4 |+| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |+| Ambient temp. with power applied | | -65 | | 125 | °C | | 3 |+| VDD (supply voltage) | VDD | | | 7 | V | | 3 |+| Analog input w.r.t. AGND | | -6 | | 6 | V | | 3 |+| Digital inputs and outputs w.r.t. AGND (lower limit) | | -0.6 | | | V | | 3 |+| VREF input w.r.t. AGND (lower limit) | | -0.6 | | | V | | 3 |+| Soldering temperature of leads | | | | 300 | °C | 10 seconds | 3 |+| ESD on the analog inputs (HBM) | | | | 5 | kV | HBM | 3 |+| ESD on the analog inputs (MM) | | | | 500 | V | MM | 3 |+| ESD on all other pins (HBM) | | | | 5 | kV | HBM | 3 |+| ESD on all other pins (MM) | | | | 500 | V | MM | 3 |+| System Gain Error | | | 3 | 10 | % FOUT | Note 2, Note 5 | 3 |+| Offset Error | VOS | | 2 | 5 | mV | Referred to Input | 3 | | Internal Voltage Reference Tolerance | | -2 | | 2 | % | | 3 | | Reference Input Range | | 2.2 | | 2.6 | V | | 4 | | Reference Input Impedance | | 3.2 | | | kΩ | | 4 | | Reference Input Capacitance | | | | 10 | pF | | 4 |-| Analog Input Maximum Signal Level | | -1 | | 1 | V | CH0+,CH0-,CH1+,CH1- to AGND | 4 |+| Maximum Signal Level | | -1 | | 1 | V | CH0+,CH0-,CH1+,CH1- to AGND | 4 | | Differential Input Voltage Range Channel 1 | | -660 | | 660 | mV | | 4 | | Analog Input Impedance | | 390 | | | kΩ | Proportional to 1/MCLK frequency | 4 | | Oscillator Input Frequency Range | MCLK | 1 | | 4 | MHz | | 4 |-| Operating Voltage | | 4.5 | | 5.5 | V | AVDD, DVDD | 4 |-| Analog Supply Current | IDD,A | | 2.7 | 3 | mA | AVDD pin only | 4 |-| Digital Supply Current | IDD,D | | 1.2 | 2 | mA | DVDD pin only | 4 |-| Specified Temperature Range | TA | -40 | | 85 | °C | | 4 |-| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |-| VDD Supply Voltage | VDD | | | 7 | V | | 3 |-| Digital Inputs and Outputs w.r.t. AGND | | -0.6 | | | V | w.r.t. AGND | 3 |-| Analog Input w.r.t. AGND | | -6 | | 6 | V | w.r.t. AGND | 3 |-| VREF Input w.r.t. AGND | | -0.6 | | | V | w.r.t. AGND | 3 |-| Ambient Temperature with Power Applied | | -65 | | 125 | °C | | 3 |-| Soldering Temperature of Leads | | | | 300 | °C | 10 seconds | 3 |-| ESD on Analog Inputs | | | | 5 | kV | HBM | 3 |-| ESD on Analog Inputs | | | | 500 | V | MM | 3 |-| ESD on All Other Pins | | | | 5 | kV | HBM | 3 |-| ESD on All Other Pins | | | | 500 | V | MM | 3 |+| Digital High-Level Input Voltage | VIH | 2.4 | | | V | DVDD = 5.0V | 5 |+| Digital Low-Level Input Voltage | VIL | | | 0.85 | V | DVDD = 5.0V | 5 |+| Input Leakage Current | | -3 | | 3 | µA | VIN = 0, VIN = DVDD | 5 |+| Pin Capacitance | | | | 10 | pF | Note 3 | 5 | | FOUT0 and FOUT1 Output High Voltage | VOH | 4.5 | | | V | VIOH = 10 mA, DVDD = 5.0V | 5 | | FOUT0 and FOUT1 Output Low Voltage | VOL | | | 0.5 | V | IOL = 10 mA, DVDD = 5.0V | 5 | | HFOUT Output High Voltage | VOH | 4 | | | V | VIOH = 5 mA, DVDD = 5.0V | 5 | | HFOUT Output Low Voltage | VOL | | | 0.5 | V | IOL = 5 mA, DVDD = 5.0V | 5 |-| High-Level Input Voltage (All Digital Inputs) | VIH | 2.4 | | | V | DVDD = 5.0V | 5 |-| Low-Level Input Voltage (All Digital Inputs) | VIL | | | 0.85 | V | DVDD = 5.0V | 5 |-| Input Leakage Current | | -3 | | 3 | µA | VIN = 0, VIN = DVDD | 5 |-| Pin Capacitance | | | | 10 | pF | Note 3 | 5 |-| Internal Voltage Reference Voltage | | | 2.4 | | V | | 3 |-| Internal Voltage Reference Temperature Coefficient | | | 15 | | ppm/°C | | 3 | ## CAD (KiCad official) @@ -95,7 +93,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/22011B.pdf) (32 pp, sha256 `9b5d77f773b4132f`, retrieved 2026-11-10, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/22011B.pdf) (32 pp, sha256 `9b5d77f773b4132f`, retrieved 2026-11-11, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
mcp3906at-i-ss-hero.overlay.json+612−610@@ -1,612 +1,614 @@ {- "spec": "adom-hero 1.4",- "mpn": "MCP3906AT-I/SS",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 24,- "span_mm": 8.9,- "dash_mm": 0.2225,- "gap_mm": 0.1335,- "pad_stroke_mm": 0.0534- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 24,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.712,- "orientation_flipped": false,- "contacts_bbox_mm": [- -3.9,- 3.9,- -3.903,- 3.903- ],- "pads_bbox_mm": [- -4.45,- 4.45,- -3.775,- 3.775- ],- "seating_z_mm": -0.0- },- "sources": {- "glb": "mcp3906at-i-ss-etched.glb",- "glb_sha256": "137d9804be9625e37f81bb88b1516950183a09416e291ae3fcc5a1863617921e",- "footprint": "mcp3906at-i-ss.kicad_mod",- "footprint_sha256": "120d739ab88ed463342f2154d6a4b447768755d164154f3706bb0af7bade9a07",- "pins": "page.json component.pins",- "pins_sha256": "ece68498c699d05a5364f2a954238fa5ad8222f38d8c48bad3f51dc8b3f61397"- },- "generator": "adom-wiki 1.8.15 (component_hero)",- "labels": [- {- "pad": "1",- "text": "DVDD",- "x": -4.55,- "y": -3.575,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "2",- "text": "HPF",- "x": -4.55,- "y": -2.925,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "3",- "text": "AVDD",- "x": -4.55,- "y": -2.275,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "4",- "text": "NC",- "x": -4.55,- "y": -1.625,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "5",- "text": "CH0+",- "x": -4.55,- "y": -0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "6",- "text": "CH0-",- "x": -4.55,- "y": -0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "7",- "text": "CH1-",- "x": -4.55,- "y": 0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "8",- "text": "CH1+",- "x": -4.55,- "y": 0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "9",- "text": "MCLR",- "x": -4.55,- "y": 1.625,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "10",- "text": "REFIN/OUT",- "x": -4.55,- "y": 2.275,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "11",- "text": "AGND",- "x": -4.55,- "y": 2.925,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "12",- "text": "F2",- "x": -4.55,- "y": 3.575,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "13",- "text": "F1",- "x": 4.55,- "y": 3.575,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "14",- "text": "F0",- "x": 4.55,- "y": 2.925,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "15",- "text": "G1",- "x": 4.55,- "y": 2.275,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "16",- "text": "G0",- "x": 4.55,- "y": 1.625,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "17",- "text": "OSC1",- "x": 4.55,- "y": 0.975,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "18",- "text": "OSC2",- "x": 4.55,- "y": 0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "19",- "text": "NC",- "x": 4.55,- "y": -0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "20",- "text": "NEG",- "x": 4.55,- "y": -0.975,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "21",- "text": "DGND",- "x": 4.55,- "y": -1.625,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "22",- "text": "HFOUT",- "x": 4.55,- "y": -2.275,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "23",- "text": "FOUT1",- "x": 4.55,- "y": -2.925,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "24",- "text": "FOUT0",- "x": 4.55,- "y": -3.575,- "align": "left",- "vertical": false,- "h": 0.325- }+ "spec": "adom-hero 1.4",+ "mpn": "MCP3906AT-I",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 24,+ "span_mm": 8.9,+ "dash_mm": 0.2225,+ "gap_mm": 0.1335,+ "pad_stroke_mm": 0.0534+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 24,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.712,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.9,+ 3.9,+ -3.903,+ 3.903 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -3.5,- -3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -3.5,- -2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -3.5,- -2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -3.5,- -1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -3.5,- -0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -3.5,- -0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -3.5,- 0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -3.5,- 0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- -3.5,- 1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- -3.5,- 2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- -3.5,- 2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- -3.5,- 3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- 3.5,- 3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- 3.5,- 2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- 3.5,- 2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- 3.5,- 1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "17",- "shape": "roundrect",- "center_mm": [- 3.5,- 0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "18",- "shape": "roundrect",- "center_mm": [- 3.5,- 0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "19",- "shape": "roundrect",- "center_mm": [- 3.5,- -0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "20",- "shape": "roundrect",- "center_mm": [- 3.5,- -0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "21",- "shape": "roundrect",- "center_mm": [- 3.5,- -1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "22",- "shape": "roundrect",- "center_mm": [- 3.5,- -2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "23",- "shape": "roundrect",- "center_mm": [- 3.5,- -2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "24",- "shape": "roundrect",- "center_mm": [- 3.5,- -3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- }- ]-}+ "pads_bbox_mm": [+ -4.45,+ 4.45,+ -3.775,+ 3.775+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "mcp3906at-i-ss-etched.glb",+ "glb_sha256": "137d9804be9625e37f81bb88b1516950183a09416e291ae3fcc5a1863617921e",+ "footprint": "mcp3906at-i-ss.kicad_mod",+ "footprint_sha256": "120d739ab88ed463342f2154d6a4b447768755d164154f3706bb0af7bade9a07",+ "pins": "page.json component.pins",+ "pins_sha256": "ece68498c699d05a5364f2a954238fa5ad8222f38d8c48bad3f51dc8b3f61397"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "DVDD",+ "x": -4.55,+ "y": -3.575,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "HPF",+ "x": -4.55,+ "y": -2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "AVDD",+ "x": -4.55,+ "y": -2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "NC",+ "x": -4.55,+ "y": -1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "CH0+",+ "x": -4.55,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "CH0-",+ "x": -4.55,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "CH1-",+ "x": -4.55,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "CH1+",+ "x": -4.55,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "MCLR",+ "x": -4.55,+ "y": 1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "REFIN/OUT",+ "x": -4.55,+ "y": 2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "AGND",+ "x": -4.55,+ "y": 2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "F2",+ "x": -4.55,+ "y": 3.575,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "F1",+ "x": 4.55,+ "y": 3.575,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "F0",+ "x": 4.55,+ "y": 2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "15",+ "text": "G1",+ "x": 4.55,+ "y": 2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "16",+ "text": "G0",+ "x": 4.55,+ "y": 1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "17",+ "text": "OSC1",+ "x": 4.55,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "18",+ "text": "OSC2",+ "x": 4.55,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "19",+ "text": "NC",+ "x": 4.55,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "20",+ "text": "NEG",+ "x": 4.55,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "21",+ "text": "DGND",+ "x": 4.55,+ "y": -1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "22",+ "text": "HFOUT",+ "x": 4.55,+ "y": -2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "23",+ "text": "FOUT1",+ "x": 4.55,+ "y": -2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "24",+ "text": "FOUT0",+ "x": 4.55,+ "y": -3.575,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ }+ ]+}
mcp3906at-i-ss.lbr+12−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Energy Metering ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SSOP-24_5.3x8.2mm_P0.65mm"> <description>SSOP-24, 5.3 x 8.2 mm, 0.65 mm pitch</description>@@ -102,6 +102,7 @@ </packages> <symbols> <symbol name="MCP3906AT-I">+ <description>Microchip Tech Energy Metering ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="15.24" x2="12.7" y2="15.24" width="0.254" layer="94"/> <wire x1="12.7" y1="15.24" x2="12.7" y2="-17.78" width="0.254" layer="94"/> <wire x1="12.7" y1="-17.78" x2="-12.7" y2="-17.78" width="0.254" layer="94"/>@@ -136,7 +137,7 @@ </symbols> <devicesets> <deviceset name="MCP3906AT-I" prefix="U">- <description></description>+ <description>Microchip Tech Energy Metering ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="MCP3906AT-I" x="0" y="0"/> </gates>@@ -168,7 +169,15 @@ <connect gate="G$1" pin="F0" pad="14"/> <connect gate="G$1" pin="F1" pad="13"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="MCP3906AT-I/SS" constant="no"/>+ <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+ <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/en/DeviceDoc/22011B.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/mcp3906at-i-ss" constant="no"/>+ <attribute name="LCSC_PN" value="C628824" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
package.json+30−30@@ -1,6 +1,6 @@ { "slug": "mcp3906at-i-ss",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Tech Energy Metering ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -52,7 +52,7 @@ "lcsc": "C628824" }, "distributor_check": {- "checked_at": "2026-11-10T07:50:41Z",+ "checked_at": "2026-11-11T02:17:35Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -68,19 +68,19 @@ "number": "1", "name": "DVDD", "type": "power_in",- "description": "Digital power supply pin for the digital circuitry, to be maintained at 5V ±10% for specified operation."+ "description": "Digital power supply pin for the digital circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors." }, { "number": "2", "name": "HPF", "type": "input",- "description": "Logic input controlling the high-pass filters on both channels: logic '1' enables the filters to remove DC offset, logic '0' disables them to allow DC voltages to be measured."+ "description": "Logic input controlling the high-pass filters on both channels: logic 1 enables them to remove DC offset, and logic 0 disables them to allow DC voltages to be measured." }, { "number": "3", "name": "AVDD", "type": "power_in",- "description": "Analog power supply pin for the analog circuitry, to be maintained at 5V ±10% for specified operation."+ "description": "Analog power supply pin for the analog circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors." }, { "number": "4",@@ -92,85 +92,85 @@ "number": "5", "name": "CH0+", "type": "input",- "description": "Non-inverting fully differential analog input for Channel 0 (current channel) with PGA; maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Non-inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "6", "name": "CH0-", "type": "input",- "description": "Inverting fully differential analog input for Channel 0 (current channel); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "7", "name": "CH1-", "type": "input",- "description": "Inverting fully differential analog input for Channel 1 (voltage channel); maximum differential voltage ±660 mV and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "8", "name": "CH1+", "type": "input",- "description": "Non-inverting fully differential analog input for Channel 1 (voltage channel); maximum differential voltage ±660 mV and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Non-inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "9", "name": "MCLR", "type": "input",- "description": "Master clear logic input: a logic '0' resets all registers and holds both ADCs in reset with output at 0x0000h."+ "description": "Master clear logic input; a logic 0 resets all digital registers, the SINC filters and accumulators, and holds both ADCs in reset with output at 0x0000h." }, { "number": "10", "name": "REFIN/OUT", "type": "bidirectional",- "description": "Output of the internal 2.4V reference (±2% tolerance, 15 ppm/°C typical) that can be overdriven by an external reference within 2.2V to 2.6V, and requires bypass capacitors to AGND."+ "description": "Output of the internal 2.4 V reference (typical tempco 15 ppm/°C, tolerance ±2%) that can be overdriven by an external reference within 2.2 V to 2.6 V, and requires bypass capacitors to AGND." }, { "number": "11", "name": "AGND", "type": "power_in",- "description": "Analog ground return path for the internal analog circuitry, to be connected to the same ground as DGND."+ "description": "Analog ground return for the ADCs, PGA, band gap reference and POR, which must be connected to the same ground as DGND." }, { "number": "12", "name": "F2", "type": "input",- "description": "Frequency control logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0."+ "description": "Logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0." }, { "number": "13", "name": "F1", "type": "input",- "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F2 and F0."+ "description": "Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F0." }, { "number": "14", "name": "F0", "type": "input",- "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F2 and F1."+ "description": "Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F1." }, { "number": "15", "name": "G1", "type": "input",- "description": "Gain control logic input that selects the Channel 0 PGA gain together with G0."+ "description": "Logic input that selects the Channel 0 PGA gain together with G0 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A)." }, { "number": "16", "name": "G0", "type": "input",- "description": "Gain control logic input that selects the Channel 0 PGA gain together with G1."+ "description": "Logic input that selects the Channel 0 PGA gain together with G1 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A)." }, { "number": "17", "name": "OSC1", "type": "input",- "description": "Oscillator crystal connection or clock input; typical clock 3.579545 MHz, usable from 1 MHz to 4 MHz without disturbing measurement error."+ "description": "Oscillator crystal connection or clock input; typical clock 3.579545 MHz, with the clock usable from 1 MHz to 4 MHz without disturbing measurement error." }, { "number": "18", "name": "OSC2", "type": "output",- "description": "Oscillator crystal connection or clock output; appropriate load capacitance should be connected to OSC1 and OSC2 for proper operation."+ "description": "Oscillator crystal connection or clock output, with appropriate load capacitance required for proper operation." }, { "number": "19",@@ -182,31 +182,31 @@ "number": "20", "name": "NEG", "type": "output",- "description": "Negative power logic output that goes to logic '1' when the phase difference between channels is greater than 90° (negative real power), synchronous with the rising edge of HFOUT."+ "description": "Negative power logic output that goes to logic 1 when the phase difference between channels exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT and held until real power becomes positive again." }, { "number": "21", "name": "DGND", "type": "power_in",- "description": "Ground return path for the internal digital circuitry, to be connected to the same ground as AGND."+ "description": "Digital ground return for the SINC filters, multiplier, HPF, LPF, digital-to-frequency converter and oscillator, which must be connected to the same ground as AGND." }, { "number": "22", "name": "HFOUT", "type": "output",- "description": "High-frequency logic output with pulse period proportional to instantaneous real power, intended for meter calibration; output high ≥4.0V and output low ≤0.5V at 5 mA with DVDD = 5.0V."+ "description": "High-frequency periodic pulse output whose period is proportional to instantaneous real power and the HFC constant, intended for meter calibration." }, { "number": "23", "name": "FOUT1", "type": "output",- "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and two-phase stepper motors (output high ≥4.5V and output low ≤0.5V at 10 mA with DVDD = 5.0V)."+ "description": "Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors." }, { "number": "24", "name": "FOUT0", "type": "output",- "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and two-phase stepper motors (output high ≥4.5V and output low ≤0.5V at 10 mA with DVDD = 5.0V)."+ "description": "Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors." } ], "provenance": {@@ -220,11 +220,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Package width mismatch: the requested hint is SSOP-24-208mil, but the datasheet's Product Identifica; The datasheet covers the MCP3905A/05L/06A family in one document. The MCP3906AT-I (Tape and Reel, In; Pin types are judgment calls, since the datasheet does not assign electrical types: REFIN/OUT is set"+ "extractor flagged: Package mismatch: the hint says SSOP-24-208mil, but the datasheet's 24-lead SSOP is the 209 mil body; The datasheet covers the MCP3905A/05L/06A family. MCP3906AT-I is covered by the Table 3-1 pin functi; Pin 4 and pin 19 are both listed as NC (no connect) in Table 3-1 and are marked unconnected." ], "pages_sent": 32,- "cost_usd": 0.1381,- "at": "2026-11-10T07:50:28"+ "cost_usd": 0.1399,+ "at": "2026-11-11T02:17:17" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/22011B.pdf",@@ -261,7 +261,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "77dd0a1fc7e70e9eda1bfde9dde937dc6e391803cff9978790523c850c85a21d",- "checked": "2026-11-10",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -279,8 +279,8 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "260d7aa41cfa6a9af84fae7c758f674cbff3cd8b4da8adf3c540b91d70e43de8",- "checked": "2026-11-10",+ "sha256": "c4b4e417aa6020aa5b6011e5b95af9e473428e52aab7e6f33562c9c333de9641",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]
page.json+33−31@@ -4,7 +4,7 @@ "slug": "mcp3906at-i-ss", "title": "MCP3906AT-I/SS", "brief": "Microchip Tech Energy Metering ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "lcsc": "C628824" }, "distributor_check": {- "checked_at": "2026-11-10T07:50:41Z",+ "checked_at": "2026-11-11T02:17:35Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -50,19 +50,19 @@ "number": "1", "name": "DVDD", "type": "power_in",- "description": "Digital power supply pin for the digital circuitry, to be maintained at 5V ±10% for specified operation."+ "description": "Digital power supply pin for the digital circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors." }, { "number": "2", "name": "HPF", "type": "input",- "description": "Logic input controlling the high-pass filters on both channels: logic '1' enables the filters to remove DC offset, logic '0' disables them to allow DC voltages to be measured."+ "description": "Logic input controlling the high-pass filters on both channels: logic 1 enables them to remove DC offset, and logic 0 disables them to allow DC voltages to be measured." }, { "number": "3", "name": "AVDD", "type": "power_in",- "description": "Analog power supply pin for the analog circuitry, to be maintained at 5V ±10% for specified operation."+ "description": "Analog power supply pin for the analog circuitry, to be maintained at 5V ±10% for specified operation and requiring appropriate bypass capacitors." }, { "number": "4",@@ -74,85 +74,85 @@ "number": "5", "name": "CH0+", "type": "input",- "description": "Non-inverting fully differential analog input for Channel 0 (current channel) with PGA; maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Non-inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "6", "name": "CH0-", "type": "input",- "description": "Inverting fully differential analog input for Channel 0 (current channel); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Inverting fully differential analog input for Channel 0 (current channel) with a maximum differential voltage of ±470 mV/GAIN and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "7", "name": "CH1-", "type": "input",- "description": "Inverting fully differential analog input for Channel 1 (voltage channel); maximum differential voltage ±660 mV and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "8", "name": "CH1+", "type": "input",- "description": "Non-inverting fully differential analog input for Channel 1 (voltage channel); maximum differential voltage ±660 mV and maximum absolute voltage ±1V to AGND, with up to ±6V applied without permanent damage."+ "description": "Non-inverting fully differential analog input for Channel 1 (voltage channel) with a maximum differential voltage of ±660 mV and maximum absolute voltage of ±1 V to AGND, with up to ±6 V tolerated without permanent damage." }, { "number": "9", "name": "MCLR", "type": "input",- "description": "Master clear logic input: a logic '0' resets all registers and holds both ADCs in reset with output at 0x0000h."+ "description": "Master clear logic input; a logic 0 resets all digital registers, the SINC filters and accumulators, and holds both ADCs in reset with output at 0x0000h." }, { "number": "10", "name": "REFIN/OUT", "type": "bidirectional",- "description": "Output of the internal 2.4V reference (±2% tolerance, 15 ppm/°C typical) that can be overdriven by an external reference within 2.2V to 2.6V, and requires bypass capacitors to AGND."+ "description": "Output of the internal 2.4 V reference (typical tempco 15 ppm/°C, tolerance ±2%) that can be overdriven by an external reference within 2.2 V to 2.6 V, and requires bypass capacitors to AGND." }, { "number": "11", "name": "AGND", "type": "power_in",- "description": "Analog ground return path for the internal analog circuitry, to be connected to the same ground as DGND."+ "description": "Analog ground return for the ADCs, PGA, band gap reference and POR, which must be connected to the same ground as DGND." }, { "number": "12", "name": "F2", "type": "input",- "description": "Frequency control logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0."+ "description": "Logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0." }, { "number": "13", "name": "F1", "type": "input",- "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F2 and F0."+ "description": "Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F0." }, { "number": "14", "name": "F0", "type": "input",- "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F2 and F1."+ "description": "Logic input for frequency control of FOUT0/1 that selects the FC and HFC constants together with F2 and F1." }, { "number": "15", "name": "G1", "type": "input",- "description": "Gain control logic input that selects the Channel 0 PGA gain together with G0."+ "description": "Logic input that selects the Channel 0 PGA gain together with G0 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A)." }, { "number": "16", "name": "G0", "type": "input",- "description": "Gain control logic input that selects the Channel 0 PGA gain together with G1."+ "description": "Logic input that selects the Channel 0 PGA gain together with G1 (gain values 1, 8 and 16 per Table 4-2, with gain 32 at G1G0 = 01 for MCP3906A)." }, { "number": "17", "name": "OSC1", "type": "input",- "description": "Oscillator crystal connection or clock input; typical clock 3.579545 MHz, usable from 1 MHz to 4 MHz without disturbing measurement error."+ "description": "Oscillator crystal connection or clock input; typical clock 3.579545 MHz, with the clock usable from 1 MHz to 4 MHz without disturbing measurement error." }, { "number": "18", "name": "OSC2", "type": "output",- "description": "Oscillator crystal connection or clock output; appropriate load capacitance should be connected to OSC1 and OSC2 for proper operation."+ "description": "Oscillator crystal connection or clock output, with appropriate load capacitance required for proper operation." }, { "number": "19",@@ -164,31 +164,31 @@ "number": "20", "name": "NEG", "type": "output",- "description": "Negative power logic output that goes to logic '1' when the phase difference between channels is greater than 90° (negative real power), synchronous with the rising edge of HFOUT."+ "description": "Negative power logic output that goes to logic 1 when the phase difference between channels exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT and held until real power becomes positive again." }, { "number": "21", "name": "DGND", "type": "power_in",- "description": "Ground return path for the internal digital circuitry, to be connected to the same ground as AGND."+ "description": "Digital ground return for the SINC filters, multiplier, HPF, LPF, digital-to-frequency converter and oscillator, which must be connected to the same ground as AGND." }, { "number": "22", "name": "HFOUT", "type": "output",- "description": "High-frequency logic output with pulse period proportional to instantaneous real power, intended for meter calibration; output high ≥4.0V and output low ≤0.5V at 5 mA with DVDD = 5.0V."+ "description": "High-frequency periodic pulse output whose period is proportional to instantaneous real power and the HFC constant, intended for meter calibration." }, { "number": "23", "name": "FOUT1", "type": "output",- "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and two-phase stepper motors (output high ≥4.5V and output low ≤0.5V at 10 mA with DVDD = 5.0V)."+ "description": "Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors." }, { "number": "24", "name": "FOUT0", "type": "output",- "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and two-phase stepper motors (output high ≥4.5V and output low ≤0.5V at 10 mA with DVDD = 5.0V)."+ "description": "Differential mechanical counter pulse output carrying average real-power information, with high output drive for electromechanical counters and 2-phase stepper motors." } ], "provenance": {@@ -202,11 +202,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Package width mismatch: the requested hint is SSOP-24-208mil, but the datasheet's Product Identifica; The datasheet covers the MCP3905A/05L/06A family in one document. The MCP3906AT-I (Tape and Reel, In; Pin types are judgment calls, since the datasheet does not assign electrical types: REFIN/OUT is set"+ "extractor flagged: Package mismatch: the hint says SSOP-24-208mil, but the datasheet's 24-lead SSOP is the 209 mil body; The datasheet covers the MCP3905A/05L/06A family. MCP3906AT-I is covered by the Table 3-1 pin functi; Pin 4 and pin 19 are both listed as NC (no connect) in Table 3-1 and are marked unconnected." ], "pages_sent": 32,- "cost_usd": 0.1381,- "at": "2026-11-10T07:50:28"+ "cost_usd": 0.1399,+ "at": "2026-11-11T02:17:17" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/22011B.pdf",@@ -243,7 +243,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "77dd0a1fc7e70e9eda1bfde9dde937dc6e391803cff9978790523c850c85a21d",- "checked": "2026-11-10",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -261,8 +261,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "260d7aa41cfa6a9af84fae7c758f674cbff3cd8b4da8adf3c540b91d70e43de8",- "checked": "2026-11-10",+ "sha256": "c4b4e417aa6020aa5b6011e5b95af9e473428e52aab7e6f33562c9c333de9641",+ "checked": "2026-11-11", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]@@ -741,5 +741,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Microchip Tech Energy Metering ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }