← Commit history
README.md+53−54
@@ -8,30 +8,30 @@ MCP3905A-I from Microchip Tech, in a SSOP-24-208mil. Pinout and pin descriptions  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | DVDD | power_in | Digital power supply pin for the digital circuitry, which should be maintained at 5V ±10% for specified operation and requires bypass capacitors. |-| 2 | HPF | input | Logic input that enables both high-pass filters when at logic '1' (removing DC offset) and disables them when at logic '0' (allowing DC measurement). |-| 3 | AVDD | power_in | Analog power supply pin for the analog circuitry, which should be maintained at 5V ±10% for specified operation and requires bypass capacitors. |-| 4 | NC | unconnected | No connect pin. |-| 5 | CH0+ | input | Non-inverting differential analog input for the current channel (Channel 0, with PGA), limited to ±470 mV/GAIN differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage. |-| 6 | CH0- | input | Inverting differential analog input for the current channel (Channel 0, with PGA), limited to ±470 mV/GAIN differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage. |-| 7 | CH1- | input | Inverting differential analog input for the voltage channel (Channel 1), limited to ±660 mV differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage. |-| 8 | CH1+ | input | Non-inverting differential analog input for the voltage channel (Channel 1), limited to ±660 mV differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage. |-| 9 | MCLR | input | Master clear input that resets both delta-sigma ADCs and all digital registers when at logic '0', holding the ADC outputs at 0x0000h. |-| 10 | REFIN/OUT | bidirectional | Output of the internal 2.4V reference (±2%, 15 ppm/°C typical) that also accepts an external reference within 2.2V to 2.6V, and requires bypass capacitors to AGND. |-| 11 | AGND | power_in | Analog ground return for the ADCs, PGA, band gap reference and POR, which must be connected to the same ground as DGND, preferably in a star connection. |-| 12 | F2 | input | Logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0. |-| 13 | F1 | input | Logic input that selects the FOUT0/1 frequency constant (FC) together with F0 and the HFOUT constant together with F2 and F0. |-| 14 | F0 | input | Logic input that selects the FOUT0/1 frequency constant (FC) together with F1 and the HFOUT constant together with F2 and F1. |-| 15 | G1 | input | Logic input that selects the Channel 0 PGA gain together with G0 (1, 8 or 16 per the Section 3.10 description; Table 4-2 lists 32 for the MCP3906A). |-| 16 | G0 | input | Logic input that selects the Channel 0 PGA gain together with G1 (1, 8 or 16 per the Section 3.10 description; Table 4-2 lists 32 for the MCP3906A). |-| 17 | OSC1 | input | Oscillator crystal connection or clock input; the clock frequency range is 1 MHz to 4 MHz without disturbing measurement error, with 3.579545 MHz typical. |-| 18 | OSC2 | passive | Oscillator crystal connection or clock output; appropriate load capacitance should be connected to OSC1 and OSC2 for proper operation. |-| 19 | NC | unconnected | No connect pin. |-| 20 | NEG | output | Negative power logic output that goes to logic '1' when the phase difference between channels exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT. |-| 21 | DGND | power_in | Digital ground return for the SINC filters, multiplier, HPF, LPF, digital-to-frequency converter and oscillator, which must be connected to the same ground as AGND. |-| 22 | HFOUT | output | High-frequency pulse output proportional to instantaneous real power, intended for calibration; rated VOH min 4.0V at 5 mA and VOL max 0.5V at 5 mA with DVDD = 5.0V. |-| 23 | FOUT1 | output | Differential mechanical counter pulse output proportional to average real power, with VOH min 4.5V and VOL max 0.5V at 10 mA with DVDD = 5.0V, designed to drive electromechanical counters and stepper motors. |-| 24 | FOUT0 | output | Differential mechanical counter pulse output proportional to average real power, with VOH min 4.5V and VOL max 0.5V at 10 mA with DVDD = 5.0V, designed to drive electromechanical counters and stepper motors. |+| 1 | DVDD | power_in | Digital power supply pin for the digital circuitry; maintain 5V ±10% for specified operation with bypass capacitors per Section 5.0. |+| 2 | HPF | input | High-pass filter control for both input channels; logic 1 enables the filters to remove DC offset and logic 0 disables them to allow DC voltages to be measured. |+| 3 | AVDD | power_in | Analog power supply pin for the analog circuitry; maintain 5V ±10% for specified operation with bypass capacitors per Section 5.0. |+| 4 | NC | unconnected | No connect. |+| 5 | CH0+ | passive | Non-inverting fully differential analog input for Channel 0 (current, PGA); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage. |+| 6 | CH0- | passive | Inverting fully differential analog input for Channel 0 (current, PGA); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage. |+| 7 | CH1- | passive | Inverting fully differential analog input for Channel 1 (voltage); maximum differential voltage ±660 mV and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage. |+| 8 | CH1+ | passive | Non-inverting fully differential analog input for Channel 1 (voltage); maximum differential voltage ±660 mV and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage. |+| 9 | MCLR | input | Master clear; a logic 0 resets both delta-sigma ADCs and all digital registers, holding the ADC outputs at 0x0000h. |+| 10 | REFIN/OUT | bidirectional | Output of the internal 2.4V reference (±2%, 15 ppm/°C typical); an external reference from 2.2 V to 2.6 V may be applied, and bypass capacitors to AGND are required even with the internal reference. |+| 11 | AGND | power_in | Analog ground return for the ADCs, PGA, band gap reference and POR; must be connected to the same ground as DGND. |+| 12 | F2 | input | Frequency control logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0. |+| 13 | F1 | input | Frequency control logic input that selects the FOUT0/1 frequency constant (FC) and HFOUT constant together with F0 and F2. |+| 14 | F0 | input | Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F1. |+| 15 | G1 | input | Gain control logic input that selects the Channel 0 PGA gain together with G0 (1, 8 or 16; 1, 8 or 16 for MCP3905A/L, 32 instead of 2 for MCP3906A). |+| 16 | G0 | input | Gain control logic input that selects the Channel 0 PGA gain together with G1. |+| 17 | OSC1 | input | Oscillator crystal connection or clock input; master clock range 1 MHz to 4 MHz with typical 3.579545 MHz. |+| 18 | OSC2 | output | Oscillator crystal connection or clock output; appropriate load capacitance must be connected for proper operation. |+| 19 | NC | unconnected | No connect. |+| 20 | NEG | output | Negative power logic output that goes to logic 1 when the phase difference exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT. |+| 21 | DGND | power_in | Digital ground return for the SINC filters, multiplier, HPF, LPF, DTF converter and oscillator; must be connected to the same ground as AGND. |+| 22 | HFOUT | output | High-frequency logic output carrying instantaneous real-power pulses, intended for meter calibration; period set by the HFC constant selected by F0, F1 and F2. |+| 23 | FOUT1 | output | Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and 2-phase stepper motors; frequency set by F0 and F1. |+| 24 | FOUT0 | output | Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and 2-phase stepper motors; frequency set by F0 and F1. |  ## Key specifications @@ -49,39 +49,38 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---| | System Gain Error |  |  | 3 | 10 | % | Note 2, Note 5 | 3 |-| Offset Error (referred to input) | VOS |  | 2 | 5 | mV | Referred to Input | 3 |+| Offset Error | VOS |  | 2 | 5 | mV | Referred to Input | 3 | | Internal voltage reference tolerance |  | -2 |  | 2 | % |  | 3 |-| Reference input range |  | 2.2 |  | 2.6 | V |  | 4 |-| Reference input impedance |  | 3.2 |  |  | kΩ |  | 4 |-| Reference input capacitance |  |  |  | 10 | pF |  | 4 |-| Maximum signal level (analog inputs) |  | -1 |  | 1 | V | CH0+,CH0-,CH1+,CH1- to AGND | 4 |-| Differential input voltage range Channel 1 |  | -660 |  | 660 | mV |  | 4 |-| Analog input impedance |  | 390 |  |  | kΩ | Proportional to 1/MCLK frequency | 4 |-| Oscillator input frequency range | MCLK | 1 |  | 4 | MHz |  | 4 |-| Operating voltage |  | 4.5 |  | 5.5 | V | AVDD, DVDD | 4 |-| Analog supply current | IDD,A |  | 2.7 | 3 | mA | AVDD pin only | 4 |-| Digital supply current | IDD,D |  | 1.2 | 2 | mA | DVDD pin only | 4 |-| Specified temperature range | TA | -40 |  | 85 | °C |  | 4 |-| Operating temperature range | TA | -40 |  | 125 | °C | Note: reduced performance over this range | 4 |-| Storage temperature range | TA | -65 |  | 150 | °C |  | 4 |-| FOUT0/FOUT1 output high voltage | VOH | 4.5 |  |  | V | VIOH = 10 mA, DVDD = 5.0V | 5 |-| FOUT0/FOUT1 output low voltage | VOL |  |  | 0.5 | V | IOL = 10 mA, DVDD = 5.0V | 5 |-| HFOUT output high voltage | VOH | 4 |  |  | V | VIOH = 5 mA, DVDD = 5.0V | 5 |-| HFOUT output low voltage | VOL |  |  | 0.5 | V | IOL = 5 mA, DVDD = 5.0V | 5 |-| High-level input voltage (all digital inputs) | VIH | 2.4 |  |  | V | DVDD = 5.0V | 5 |-| Low-level input voltage (all digital inputs) | VIL |  |  | 0.85 | V | DVDD = 5.0V | 5 |-| Input leakage current |  | -3 |  | 3 | µA | VIN = 0, VIN = DVDD | 5 |-| Pin capacitance |  |  |  | 10 | pF | Note 3 | 5 |-| VDD supply voltage (absolute maximum) | VDD |  |  | 7 | V |  | 3 |-| Digital inputs and outputs w.r.t. AGND |  | -0.6 |  |  | V | Maximum given as VDD + 0.6V (expression) | 3 |+| Reference Input Range |  | 2.2 |  | 2.6 | V |  | 4 |+| Reference Input Impedance |  | 3.2 |  |  | kΩ |  | 4 |+| Reference Input Capacitance |  |  |  | 10 | pF |  | 4 |+| Maximum Signal Level (CH0+, CH0-, CH1+, CH1- to AGND) |  | -1 |  | 1 | V | CH0+,CH0-,CH1+,CH1- to AGND | 4 |+| Differential Input Voltage Range Channel 1 |  | -660 |  | 660 | mV |  | 4 |+| Analog Input Impedance |  | 390 |  |  | kΩ | Proportional to 1/MCLK frequency | 4 |+| Oscillator Input Frequency Range (MCLK) | MCLK | 1 |  | 4 | MHz |  | 4 |+| Operating Voltage |  | 4.5 |  | 5.5 | V | AVDD, DVDD | 4 |+| Analog Supply Current | IDD,A |  | 2.7 | 3 | mA | AVDD pin only | 4 |+| Digital Supply Current | IDD,D |  | 1.2 | 2 | mA | DVDD pin only | 4 |+| Specified Temperature Range | TA | -40 |  | 85 | °C |  | 4 |+| Supply voltage VDD | VDD |  |  | 7 | V |  | 3 |+| Digital inputs and outputs w.r.t. AGND (minimum) |  | -0.6 |  |  | V |  | 3 | | Analog input w.r.t. AGND |  | -6 |  | 6 | V |  | 3 |-| VREF input w.r.t. AGND |  | -0.6 |  |  | V | Maximum given as VDD + 0.6V (expression) | 3 |+| VREF input w.r.t. AGND (minimum) |  | -0.6 |  |  | V |  | 3 | | Ambient temperature with power applied |  | -65 |  | 125 | °C |  | 3 |+| Storage temperature |  | -65 |  | 150 | °C |  | 3 | | Soldering temperature of leads |  |  |  | 300 | °C | 10 seconds | 3 |-| ESD on analog inputs |  |  |  | 5 | kV | HBM | 3 |-| ESD on analog inputs |  |  |  | 500 | V | MM | 3 |-| ESD on all other pins |  |  |  | 5 | kV | HBM | 3 |-| ESD on all other pins |  |  |  | 500 | V | MM | 3 |+| ESD on the analog inputs (HBM) |  |  |  | 5 | kV | HBM | 3 |+| ESD on the analog inputs (MM) |  |  |  | 500 | V | MM | 3 |+| ESD on all other pins (HBM) |  |  |  | 5 | kV | HBM | 3 |+| ESD on all other pins (MM) |  |  |  | 500 | V | MM | 3 |+| FOUT0 and FOUT1 Output High Voltage | VOH | 4.5 |  |  | V | VIOH = 10 mA, DVDD = 5.0V | 5 |+| FOUT0 and FOUT1 Output Low Voltage | VOL |  |  | 0.5 | V | IOL = 10 mA, DVDD = 5.0V | 5 |+| HFOUT Output High Voltage | VOH | 4 |  |  | V | VIOH = 5 mA, DVDD = 5.0V | 5 |+| HFOUT Output Low Voltage | VOL |  |  | 0.5 | V | IOL = 5 mA, DVDD = 5.0V | 5 |+| High-Level Input Voltage (all digital input pins) | VIH | 2.4 |  |  | V | DVDD = 5.0V | 5 |+| Low-Level Input Voltage (all digital input pins) | VIL |  |  | 0.85 | V | DVDD = 5.0V | 5 |+| Input Leakage Current |  | -3 |  | 3 | µA | VIN = 0, VIN = DVDD | 5 |+| Pin Capacitance |  |  |  | 10 | pF | Note 3 | 5 |  ## CAD (KiCad official) @@ -94,7 +93,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](docs/mcp3905a-i-ss-datasheet.pdf) (32 pp, sha256 `9b5d77f773b4132f`, retrieved 2026-11-10, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](docs/mcp3905a-i-ss-datasheet.pdf) (32 pp, sha256 `9b5d77f773b4132f`, retrieved 2026-11-11, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
mcp3905a-i-ss-hero.overlay.json+612−610
@@ -1,612 +1,614 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "MCP3905A-I/SS",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 24,-      "span_mm": 8.9,-      "dash_mm": 0.2225,-      "gap_mm": 0.1335,-      "pad_stroke_mm": 0.0534-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 24,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.712,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.9,-      3.9,-      -3.903,-      3.903-    ],-    "pads_bbox_mm": [-      -4.45,-      4.45,-      -3.775,-      3.775-    ],-    "seating_z_mm": -0.0-  },-  "sources": {-    "glb": "mcp3905a-i-ss-etched.glb",-    "glb_sha256": "fbd4d16cc442415f92fbf15cd7547219164c554f5a5a47d91d3238eb07bd9c6e",-    "footprint": "mcp3905a-i-ss.kicad_mod",-    "footprint_sha256": "120d739ab88ed463342f2154d6a4b447768755d164154f3706bb0af7bade9a07",-    "pins": "page.json component.pins",-    "pins_sha256": "ece68498c699d05a5364f2a954238fa5ad8222f38d8c48bad3f51dc8b3f61397"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "DVDD",-      "x": -4.55,-      "y": -3.575,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "2",-      "text": "HPF",-      "x": -4.55,-      "y": -2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "3",-      "text": "AVDD",-      "x": -4.55,-      "y": -2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "4",-      "text": "NC",-      "x": -4.55,-      "y": -1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "5",-      "text": "CH0+",-      "x": -4.55,-      "y": -0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "6",-      "text": "CH0-",-      "x": -4.55,-      "y": -0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "7",-      "text": "CH1-",-      "x": -4.55,-      "y": 0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "8",-      "text": "CH1+",-      "x": -4.55,-      "y": 0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "9",-      "text": "MCLR",-      "x": -4.55,-      "y": 1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "10",-      "text": "REFIN/OUT",-      "x": -4.55,-      "y": 2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "11",-      "text": "AGND",-      "x": -4.55,-      "y": 2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "12",-      "text": "F2",-      "x": -4.55,-      "y": 3.575,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "13",-      "text": "F1",-      "x": 4.55,-      "y": 3.575,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "14",-      "text": "F0",-      "x": 4.55,-      "y": 2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "15",-      "text": "G1",-      "x": 4.55,-      "y": 2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "16",-      "text": "G0",-      "x": 4.55,-      "y": 1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "17",-      "text": "OSC1",-      "x": 4.55,-      "y": 0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "18",-      "text": "OSC2",-      "x": 4.55,-      "y": 0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "19",-      "text": "NC",-      "x": 4.55,-      "y": -0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "20",-      "text": "NEG",-      "x": 4.55,-      "y": -0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "21",-      "text": "DGND",-      "x": 4.55,-      "y": -1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "22",-      "text": "HFOUT",-      "x": 4.55,-      "y": -2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "23",-      "text": "FOUT1",-      "x": 4.55,-      "y": -2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "24",-      "text": "FOUT0",-      "x": 4.55,-      "y": -3.575,-      "align": "left",-      "vertical": false,-      "h": 0.325-    }+ "spec": "adom-hero 1.4",+ "mpn": "MCP3905A-I",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 24,+   "span_mm": 8.9,+   "dash_mm": 0.2225,+   "gap_mm": 0.1335,+   "pad_stroke_mm": 0.0534+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 24,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.712,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.9,+   3.9,+   -3.903,+   3.903   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "21",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "22",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "23",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "24",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -4.45,+   4.45,+   -3.775,+   3.775+  ],+  "seating_z_mm": -0.0+ },+ "sources": {+  "glb": "mcp3905a-i-ss-etched.glb",+  "glb_sha256": "fbd4d16cc442415f92fbf15cd7547219164c554f5a5a47d91d3238eb07bd9c6e",+  "footprint": "mcp3905a-i-ss.kicad_mod",+  "footprint_sha256": "120d739ab88ed463342f2154d6a4b447768755d164154f3706bb0af7bade9a07",+  "pins": "page.json component.pins",+  "pins_sha256": "ece68498c699d05a5364f2a954238fa5ad8222f38d8c48bad3f51dc8b3f61397"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "DVDD",+   "x": -4.55,+   "y": -3.575,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "HPF",+   "x": -4.55,+   "y": -2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "AVDD",+   "x": -4.55,+   "y": -2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "NC",+   "x": -4.55,+   "y": -1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "5",+   "text": "CH0+",+   "x": -4.55,+   "y": -0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "6",+   "text": "CH0-",+   "x": -4.55,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "7",+   "text": "CH1-",+   "x": -4.55,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "8",+   "text": "CH1+",+   "x": -4.55,+   "y": 0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "9",+   "text": "MCLR",+   "x": -4.55,+   "y": 1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "10",+   "text": "REFIN/OUT",+   "x": -4.55,+   "y": 2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "11",+   "text": "AGND",+   "x": -4.55,+   "y": 2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "12",+   "text": "F2",+   "x": -4.55,+   "y": 3.575,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "13",+   "text": "F1",+   "x": 4.55,+   "y": 3.575,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "14",+   "text": "F0",+   "x": 4.55,+   "y": 2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "15",+   "text": "G1",+   "x": 4.55,+   "y": 2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "16",+   "text": "G0",+   "x": 4.55,+   "y": 1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "17",+   "text": "OSC1",+   "x": 4.55,+   "y": 0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "18",+   "text": "OSC2",+   "x": 4.55,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "19",+   "text": "NC",+   "x": 4.55,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "20",+   "text": "NEG",+   "x": 4.55,+   "y": -0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "21",+   "text": "DGND",+   "x": 4.55,+   "y": -1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "22",+   "text": "HFOUT",+   "x": 4.55,+   "y": -2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "23",+   "text": "FOUT1",+   "x": 4.55,+   "y": -2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "24",+   "text": "FOUT0",+   "x": 4.55,+   "y": -3.575,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "21",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "22",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "23",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "24",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
mcp3905a-i-ss.kicad_sym+5−5
@@ -24,19 +24,19 @@       (name "NC" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -17.78 2.54 0) (length 5.08)+    (pin passive line (at -17.78 2.54 0) (length 5.08)       (name "CH0+" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -17.78 0.00 0) (length 5.08)+    (pin passive line (at -17.78 0.00 0) (length 5.08)       (name "CH0-" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -17.78 -2.54 0) (length 5.08)+    (pin passive line (at -17.78 -2.54 0) (length 5.08)       (name "CH1-" (effects (font (size 1.27 1.27))))       (number "7" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -17.78 -5.08 0) (length 5.08)+    (pin passive line (at -17.78 -5.08 0) (length 5.08)       (name "CH1+" (effects (font (size 1.27 1.27))))       (number "8" (effects (font (size 1.27 1.27))))     )@@ -80,7 +80,7 @@       (name "NC" (effects (font (size 1.27 1.27))))       (number "19" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at 17.78 -2.54 180) (length 5.08)+    (pin output line (at 17.78 -2.54 180) (length 5.08)       (name "OSC2" (effects (font (size 1.27 1.27))))       (number "18" (effects (font (size 1.27 1.27))))     )
mcp3905a-i-ss.lbr+17−8
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Battery Management ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SSOP-24_5.3x8.2mm_P0.65mm">   <description>SSOP-24, 5.3 x 8.2 mm, 0.65 mm pitch</description>@@ -102,6 +102,7 @@ </packages> <symbols> <symbol name="MCP3905A-I">+  <description>Microchip Tech Battery Management ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="15.24" x2="12.7" y2="15.24" width="0.254" layer="94"/>   <wire x1="12.7" y1="15.24" x2="12.7" y2="-17.78" width="0.254" layer="94"/>   <wire x1="12.7" y1="-17.78" x2="-12.7" y2="-17.78" width="0.254" layer="94"/>@@ -112,10 +113,10 @@   <pin name="HPF" x="-17.78" y="10.16" length="middle" direction="in"/>   <pin name="AVDD" x="-17.78" y="7.62" length="middle" direction="pwr"/>   <pin name="NC" x="-17.78" y="5.08" length="middle" direction="nc"/>-  <pin name="CH0+" x="-17.78" y="2.54" length="middle" direction="in"/>-  <pin name="CH0-" x="-17.78" y="0" length="middle" direction="in"/>-  <pin name="CH1-" x="-17.78" y="-2.54" length="middle" direction="in"/>-  <pin name="CH1+" x="-17.78" y="-5.08" length="middle" direction="in"/>+  <pin name="CH0+" x="-17.78" y="2.54" length="middle" direction="pas"/>+  <pin name="CH0-" x="-17.78" y="0" length="middle" direction="pas"/>+  <pin name="CH1-" x="-17.78" y="-2.54" length="middle" direction="pas"/>+  <pin name="CH1+" x="-17.78" y="-5.08" length="middle" direction="pas"/>   <pin name="MCLR" x="-17.78" y="-7.62" length="middle" direction="in"/>   <pin name="REFIN/OUT" x="-17.78" y="-10.16" length="middle" direction="io"/>   <pin name="AGND" x="-17.78" y="-12.7" length="middle" direction="pwr"/>@@ -126,7 +127,7 @@   <pin name="DGND" x="17.78" y="5.08" length="middle" direction="pwr" rot="R180"/>   <pin name="NEG" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>   <pin name="NC@2" x="17.78" y="0" length="middle" direction="nc" rot="R180"/>-  <pin name="OSC2" x="17.78" y="-2.54" length="middle" direction="pas" rot="R180"/>+  <pin name="OSC2" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>   <pin name="OSC1" x="17.78" y="-5.08" length="middle" direction="in" rot="R180"/>   <pin name="G0" x="17.78" y="-7.62" length="middle" direction="in" rot="R180"/>   <pin name="G1" x="17.78" y="-10.16" length="middle" direction="in" rot="R180"/>@@ -136,7 +137,7 @@ </symbols> <devicesets> <deviceset name="MCP3905A-I" prefix="U">-  <description></description>+  <description>Microchip Tech Battery Management ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="MCP3905A-I" x="0" y="0"/>   </gates>@@ -168,7 +169,15 @@         <connect gate="G$1" pin="F0" pad="14"/>         <connect gate="G$1" pin="F1" pad="13"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="MCP3905A-I/SS" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/9509f3050973a67511be576be87a6d86.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/mcp3905a-i-ss" constant="no"/>+          <attribute name="LCSC_PN" value="C640855" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+37−37
@@ -1,6 +1,6 @@ {   "slug": "mcp3905a-i-ss",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Tech Battery Management ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C640855"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:48:16Z",+      "checked_at": "2026-11-11T02:44:24Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -68,145 +68,145 @@         "number": "1",         "name": "DVDD",         "type": "power_in",-        "description": "Digital power supply pin for the digital circuitry, which should be maintained at 5V ±10% for specified operation and requires bypass capacitors."+        "description": "Digital power supply pin for the digital circuitry; maintain 5V ±10% for specified operation with bypass capacitors per Section 5.0."       },       {         "number": "2",         "name": "HPF",         "type": "input",-        "description": "Logic input that enables both high-pass filters when at logic '1' (removing DC offset) and disables them when at logic '0' (allowing DC measurement)."+        "description": "High-pass filter control for both input channels; logic 1 enables the filters to remove DC offset and logic 0 disables them to allow DC voltages to be measured."       },       {         "number": "3",         "name": "AVDD",         "type": "power_in",-        "description": "Analog power supply pin for the analog circuitry, which should be maintained at 5V ±10% for specified operation and requires bypass capacitors."+        "description": "Analog power supply pin for the analog circuitry; maintain 5V ±10% for specified operation with bypass capacitors per Section 5.0."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No connect."       },       {         "number": "5",         "name": "CH0+",-        "type": "input",-        "description": "Non-inverting differential analog input for the current channel (Channel 0, with PGA), limited to ±470 mV/GAIN differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Non-inverting fully differential analog input for Channel 0 (current, PGA); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "6",         "name": "CH0-",-        "type": "input",-        "description": "Inverting differential analog input for the current channel (Channel 0, with PGA), limited to ±470 mV/GAIN differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Inverting fully differential analog input for Channel 0 (current, PGA); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "7",         "name": "CH1-",-        "type": "input",-        "description": "Inverting differential analog input for the voltage channel (Channel 1), limited to ±660 mV differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Inverting fully differential analog input for Channel 1 (voltage); maximum differential voltage ±660 mV and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "8",         "name": "CH1+",-        "type": "input",-        "description": "Non-inverting differential analog input for the voltage channel (Channel 1), limited to ±660 mV differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Non-inverting fully differential analog input for Channel 1 (voltage); maximum differential voltage ±660 mV and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "9",         "name": "MCLR",         "type": "input",-        "description": "Master clear input that resets both delta-sigma ADCs and all digital registers when at logic '0', holding the ADC outputs at 0x0000h."+        "description": "Master clear; a logic 0 resets both delta-sigma ADCs and all digital registers, holding the ADC outputs at 0x0000h."       },       {         "number": "10",         "name": "REFIN/OUT",         "type": "bidirectional",-        "description": "Output of the internal 2.4V reference (±2%, 15 ppm/°C typical) that also accepts an external reference within 2.2V to 2.6V, and requires bypass capacitors to AGND."+        "description": "Output of the internal 2.4V reference (±2%, 15 ppm/°C typical); an external reference from 2.2 V to 2.6 V may be applied, and bypass capacitors to AGND are required even with the internal reference."       },       {         "number": "11",         "name": "AGND",         "type": "power_in",-        "description": "Analog ground return for the ADCs, PGA, band gap reference and POR, which must be connected to the same ground as DGND, preferably in a star connection."+        "description": "Analog ground return for the ADCs, PGA, band gap reference and POR; must be connected to the same ground as DGND."       },       {         "number": "12",         "name": "F2",         "type": "input",-        "description": "Logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0."+        "description": "Frequency control logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0."       },       {         "number": "13",         "name": "F1",         "type": "input",-        "description": "Logic input that selects the FOUT0/1 frequency constant (FC) together with F0 and the HFOUT constant together with F2 and F0."+        "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) and HFOUT constant together with F0 and F2."       },       {         "number": "14",         "name": "F0",         "type": "input",-        "description": "Logic input that selects the FOUT0/1 frequency constant (FC) together with F1 and the HFOUT constant together with F2 and F1."+        "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F1."       },       {         "number": "15",         "name": "G1",         "type": "input",-        "description": "Logic input that selects the Channel 0 PGA gain together with G0 (1, 8 or 16 per the Section 3.10 description; Table 4-2 lists 32 for the MCP3906A)."+        "description": "Gain control logic input that selects the Channel 0 PGA gain together with G0 (1, 8 or 16; 1, 8 or 16 for MCP3905A/L, 32 instead of 2 for MCP3906A)."       },       {         "number": "16",         "name": "G0",         "type": "input",-        "description": "Logic input that selects the Channel 0 PGA gain together with G1 (1, 8 or 16 per the Section 3.10 description; Table 4-2 lists 32 for the MCP3906A)."+        "description": "Gain control logic input that selects the Channel 0 PGA gain together with G1."       },       {         "number": "17",         "name": "OSC1",         "type": "input",-        "description": "Oscillator crystal connection or clock input; the clock frequency range is 1 MHz to 4 MHz without disturbing measurement error, with 3.579545 MHz typical."+        "description": "Oscillator crystal connection or clock input; master clock range 1 MHz to 4 MHz with typical 3.579545 MHz."       },       {         "number": "18",         "name": "OSC2",-        "type": "passive",-        "description": "Oscillator crystal connection or clock output; appropriate load capacitance should be connected to OSC1 and OSC2 for proper operation."+        "type": "output",+        "description": "Oscillator crystal connection or clock output; appropriate load capacitance must be connected for proper operation."       },       {         "number": "19",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No connect."       },       {         "number": "20",         "name": "NEG",         "type": "output",-        "description": "Negative power logic output that goes to logic '1' when the phase difference between channels exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT."+        "description": "Negative power logic output that goes to logic 1 when the phase difference exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT."       },       {         "number": "21",         "name": "DGND",         "type": "power_in",-        "description": "Digital ground return for the SINC filters, multiplier, HPF, LPF, digital-to-frequency converter and oscillator, which must be connected to the same ground as AGND."+        "description": "Digital ground return for the SINC filters, multiplier, HPF, LPF, DTF converter and oscillator; must be connected to the same ground as AGND."       },       {         "number": "22",         "name": "HFOUT",         "type": "output",-        "description": "High-frequency pulse output proportional to instantaneous real power, intended for calibration; rated VOH min 4.0V at 5 mA and VOL max 0.5V at 5 mA with DVDD = 5.0V."+        "description": "High-frequency logic output carrying instantaneous real-power pulses, intended for meter calibration; period set by the HFC constant selected by F0, F1 and F2."       },       {         "number": "23",         "name": "FOUT1",         "type": "output",-        "description": "Differential mechanical counter pulse output proportional to average real power, with VOH min 4.5V and VOL max 0.5V at 10 mA with DVDD = 5.0V, designed to drive electromechanical counters and stepper motors."+        "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and 2-phase stepper motors; frequency set by F0 and F1."       },       {         "number": "24",         "name": "FOUT0",         "type": "output",-        "description": "Differential mechanical counter pulse output proportional to average real power, with VOH min 4.5V and VOL max 0.5V at 10 mA with DVDD = 5.0V, designed to drive electromechanical counters and stepper motors."+        "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and 2-phase stepper motors; frequency set by F0 and F1."       }     ],     "provenance": {@@ -220,11 +220,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Package hint says SSOP-24-208mil, but the datasheet describes the 24-lead SSOP as 209 mil body (orde; The datasheet covers the MCP3905A/05L/06A family. The 24LD SSOP pinout is shared, and MCP3905A-I/SS ; Pin types for the oscillator pins are inferred from the datasheet's dual-function wording ('crystal "+          "extractor flagged: Package hint is SSOP-24-208mil, but the datasheet names the package 24-lead SSOP (SS suffix) with a ; The datasheet has no explicit pin type classification. Analog inputs are typed as passive, REFIN/OUT; Pin descriptions for F2, F1, F0, G1 and G0 are summarized from the Section 3.9 and 3.10 text. The ex"         ],         "pages_sent": 32,-        "cost_usd": 0.1384,-        "at": "2026-11-10T07:48:04"+        "cost_usd": 0.1409,+        "at": "2026-11-11T02:44:07"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/9509f3050973a67511be576be87a6d86.pdf",@@ -261,7 +261,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "77dd0a1fc7e70e9eda1bfde9dde937dc6e391803cff9978790523c850c85a21d",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -279,8 +279,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "77d23c91f4e57cca260eccf2b2db6ad5e81b2ed0e4fd2b4a532ecdb0b4199f56",-        "checked": "2026-11-10",+        "sha256": "ee85e88ce9a8e274049625d02bf3b6508dd5ebbfed9768e0086327ae85069d37",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]
page.json+40−38
@@ -4,7 +4,7 @@   "slug": "mcp3905a-i-ss",   "title": "MCP3905A-I/SS",   "brief": "Microchip Tech Battery Management ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C640855"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:48:16Z",+      "checked_at": "2026-11-11T02:44:24Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,145 +50,145 @@         "number": "1",         "name": "DVDD",         "type": "power_in",-        "description": "Digital power supply pin for the digital circuitry, which should be maintained at 5V ±10% for specified operation and requires bypass capacitors."+        "description": "Digital power supply pin for the digital circuitry; maintain 5V ±10% for specified operation with bypass capacitors per Section 5.0."       },       {         "number": "2",         "name": "HPF",         "type": "input",-        "description": "Logic input that enables both high-pass filters when at logic '1' (removing DC offset) and disables them when at logic '0' (allowing DC measurement)."+        "description": "High-pass filter control for both input channels; logic 1 enables the filters to remove DC offset and logic 0 disables them to allow DC voltages to be measured."       },       {         "number": "3",         "name": "AVDD",         "type": "power_in",-        "description": "Analog power supply pin for the analog circuitry, which should be maintained at 5V ±10% for specified operation and requires bypass capacitors."+        "description": "Analog power supply pin for the analog circuitry; maintain 5V ±10% for specified operation with bypass capacitors per Section 5.0."       },       {         "number": "4",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No connect."       },       {         "number": "5",         "name": "CH0+",-        "type": "input",-        "description": "Non-inverting differential analog input for the current channel (Channel 0, with PGA), limited to ±470 mV/GAIN differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Non-inverting fully differential analog input for Channel 0 (current, PGA); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "6",         "name": "CH0-",-        "type": "input",-        "description": "Inverting differential analog input for the current channel (Channel 0, with PGA), limited to ±470 mV/GAIN differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Inverting fully differential analog input for Channel 0 (current, PGA); maximum differential voltage ±470 mV/GAIN and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "7",         "name": "CH1-",-        "type": "input",-        "description": "Inverting differential analog input for the voltage channel (Channel 1), limited to ±660 mV differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Inverting fully differential analog input for Channel 1 (voltage); maximum differential voltage ±660 mV and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "8",         "name": "CH1+",-        "type": "input",-        "description": "Non-inverting differential analog input for the voltage channel (Channel 1), limited to ±660 mV differential and ±1V absolute to AGND, with up to ±6V tolerated without permanent damage."+        "type": "passive",+        "description": "Non-inverting fully differential analog input for Channel 1 (voltage); maximum differential voltage ±660 mV and maximum absolute voltage ±1 V to AGND, with up to ±6 V withstood without permanent damage."       },       {         "number": "9",         "name": "MCLR",         "type": "input",-        "description": "Master clear input that resets both delta-sigma ADCs and all digital registers when at logic '0', holding the ADC outputs at 0x0000h."+        "description": "Master clear; a logic 0 resets both delta-sigma ADCs and all digital registers, holding the ADC outputs at 0x0000h."       },       {         "number": "10",         "name": "REFIN/OUT",         "type": "bidirectional",-        "description": "Output of the internal 2.4V reference (±2%, 15 ppm/°C typical) that also accepts an external reference within 2.2V to 2.6V, and requires bypass capacitors to AGND."+        "description": "Output of the internal 2.4V reference (±2%, 15 ppm/°C typical); an external reference from 2.2 V to 2.6 V may be applied, and bypass capacitors to AGND are required even with the internal reference."       },       {         "number": "11",         "name": "AGND",         "type": "power_in",-        "description": "Analog ground return for the ADCs, PGA, band gap reference and POR, which must be connected to the same ground as DGND, preferably in a star connection."+        "description": "Analog ground return for the ADCs, PGA, band gap reference and POR; must be connected to the same ground as DGND."       },       {         "number": "12",         "name": "F2",         "type": "input",-        "description": "Logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0."+        "description": "Frequency control logic input that selects the HFOUT frequency constant (HFC) together with F1 and F0."       },       {         "number": "13",         "name": "F1",         "type": "input",-        "description": "Logic input that selects the FOUT0/1 frequency constant (FC) together with F0 and the HFOUT constant together with F2 and F0."+        "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) and HFOUT constant together with F0 and F2."       },       {         "number": "14",         "name": "F0",         "type": "input",-        "description": "Logic input that selects the FOUT0/1 frequency constant (FC) together with F1 and the HFOUT constant together with F2 and F1."+        "description": "Frequency control logic input that selects the FOUT0/1 frequency constant (FC) together with F1."       },       {         "number": "15",         "name": "G1",         "type": "input",-        "description": "Logic input that selects the Channel 0 PGA gain together with G0 (1, 8 or 16 per the Section 3.10 description; Table 4-2 lists 32 for the MCP3906A)."+        "description": "Gain control logic input that selects the Channel 0 PGA gain together with G0 (1, 8 or 16; 1, 8 or 16 for MCP3905A/L, 32 instead of 2 for MCP3906A)."       },       {         "number": "16",         "name": "G0",         "type": "input",-        "description": "Logic input that selects the Channel 0 PGA gain together with G1 (1, 8 or 16 per the Section 3.10 description; Table 4-2 lists 32 for the MCP3906A)."+        "description": "Gain control logic input that selects the Channel 0 PGA gain together with G1."       },       {         "number": "17",         "name": "OSC1",         "type": "input",-        "description": "Oscillator crystal connection or clock input; the clock frequency range is 1 MHz to 4 MHz without disturbing measurement error, with 3.579545 MHz typical."+        "description": "Oscillator crystal connection or clock input; master clock range 1 MHz to 4 MHz with typical 3.579545 MHz."       },       {         "number": "18",         "name": "OSC2",-        "type": "passive",-        "description": "Oscillator crystal connection or clock output; appropriate load capacitance should be connected to OSC1 and OSC2 for proper operation."+        "type": "output",+        "description": "Oscillator crystal connection or clock output; appropriate load capacitance must be connected for proper operation."       },       {         "number": "19",         "name": "NC",         "type": "unconnected",-        "description": "No connect pin."+        "description": "No connect."       },       {         "number": "20",         "name": "NEG",         "type": "output",-        "description": "Negative power logic output that goes to logic '1' when the phase difference between channels exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT."+        "description": "Negative power logic output that goes to logic 1 when the phase difference exceeds 90° (measured real power negative), synchronous with the rising edge of HFOUT."       },       {         "number": "21",         "name": "DGND",         "type": "power_in",-        "description": "Digital ground return for the SINC filters, multiplier, HPF, LPF, digital-to-frequency converter and oscillator, which must be connected to the same ground as AGND."+        "description": "Digital ground return for the SINC filters, multiplier, HPF, LPF, DTF converter and oscillator; must be connected to the same ground as AGND."       },       {         "number": "22",         "name": "HFOUT",         "type": "output",-        "description": "High-frequency pulse output proportional to instantaneous real power, intended for calibration; rated VOH min 4.0V at 5 mA and VOL max 0.5V at 5 mA with DVDD = 5.0V."+        "description": "High-frequency logic output carrying instantaneous real-power pulses, intended for meter calibration; period set by the HFC constant selected by F0, F1 and F2."       },       {         "number": "23",         "name": "FOUT1",         "type": "output",-        "description": "Differential mechanical counter pulse output proportional to average real power, with VOH min 4.5V and VOL max 0.5V at 10 mA with DVDD = 5.0V, designed to drive electromechanical counters and stepper motors."+        "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and 2-phase stepper motors; frequency set by F0 and F1."       },       {         "number": "24",         "name": "FOUT0",         "type": "output",-        "description": "Differential mechanical counter pulse output proportional to average real power, with VOH min 4.5V and VOL max 0.5V at 10 mA with DVDD = 5.0V, designed to drive electromechanical counters and stepper motors."+        "description": "Differential mechanical counter logic output carrying average real-power pulses, with high output drive for electromechanical counters and 2-phase stepper motors; frequency set by F0 and F1."       }     ],     "provenance": {@@ -202,11 +202,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Package hint says SSOP-24-208mil, but the datasheet describes the 24-lead SSOP as 209 mil body (orde; The datasheet covers the MCP3905A/05L/06A family. The 24LD SSOP pinout is shared, and MCP3905A-I/SS ; Pin types for the oscillator pins are inferred from the datasheet's dual-function wording ('crystal "+          "extractor flagged: Package hint is SSOP-24-208mil, but the datasheet names the package 24-lead SSOP (SS suffix) with a ; The datasheet has no explicit pin type classification. Analog inputs are typed as passive, REFIN/OUT; Pin descriptions for F2, F1, F0, G1 and G0 are summarized from the Section 3.9 and 3.10 text. The ex"         ],         "pages_sent": 32,-        "cost_usd": 0.1384,-        "at": "2026-11-10T07:48:04"+        "cost_usd": 0.1409,+        "at": "2026-11-11T02:44:07"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/9509f3050973a67511be576be87a6d86.pdf",@@ -243,7 +243,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "77dd0a1fc7e70e9eda1bfde9dde937dc6e391803cff9978790523c850c85a21d",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -261,8 +261,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "77d23c91f4e57cca260eccf2b2db6ad5e81b2ed0e4fd2b4a532ecdb0b4199f56",-        "checked": "2026-11-10",+        "sha256": "ee85e88ce9a8e274049625d02bf3b6508dd5ebbfed9768e0086327ae85069d37",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -729,5 +729,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Microchip Tech Battery Management ICs, SSOP-24-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file