main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp3551t-e: viewers · Ray
mcp3551t-e-etched.glb Publish 0.1.0 · Ray
mcp3551t-e-etched.step mcp3551t-e: factory component page (tier=mfr) · Ray
mcp3551t-e-hero.glb mcp3551t-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp3551t-e-hero.overlay.json Publish 0.1.0 · Ray
mcp3551t-e.glb Publish 0.1.0 · Ray
mcp3551t-e.kicad_mod Publish 0.1.0 · Ray
mcp3551t-e.kicad_sym Publish 0.1.0 · Ray
mcp3551t-e.lbr Publish 0.1.0 · Ray
mcp3551t-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MCP3551T-E

Microchip Tech · Pre-ordered MCUs · SOIC-8

MCP3551T-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VREF power_in Reference voltage analog input accepting single-ended reference voltages from 0.1V to VDD.
2 VIN+ power_in Non-inverting analog input; absolute voltage range extends from VSS - 0.3V to VDD + 0.3V.
3 VIN- power_in Inverting analog input; absolute voltage range extends from VSS - 0.3V to VDD + 0.3V.
4 VSS power_in Ground pin and current return path for analog and digital circuitry, tied to the analog ground plane if available.
5 SCK input Serial clock digital input that synchronizes data communication, supporting SPI mode 1,1 and 0,0 with data shifted out on the falling edge.
6 SDO/RDY output Data/ready digital output that goes active-low when a conversion completes and then shifts out the 24-bit data word on falling SCK edges, high-impedance when CS is high.
7 CS input Chip select digital input that gates communication and starts conversions on its falling edge, selecting Single or Continuous Conversion mode.
8 VDD power_in Positive supply voltage for analog and digital circuitry, 2.7V to 5.5V with a 0.1 µF bypass capacitor.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 2.7 5.5 V 4
Supply Current (MCP3551), 5V IDD 120 170 µA VDD = 5V 4
Supply Current (MCP3551), 2.7V IDD 100 µA VDD = 2.7V 4
Supply Current, Sleep Mode IDDSL 10 µA 4
Supply Current, Shutdown Mode IDDS 1 µA CS = SCK = VDD 4
No Missing Codes NMC 22 bits At DC (Note 5) 3
Output Noise eN 2.5 µVRMS 3
Effective Resolution ER 21.9 bits RMS VREF = 5V 3
Conversion Time MCP3551 tCONV 73.1 ms 3
Conversion Time Tolerance MCP3551 tCONV -2 2 % 3
Integral Non-Linearity INL 2 6 ppm TA = +25°C only (Note 2) 3
Offset Error VOS -12 3 12 µV TA = +25°C 3
Offset Error at 85°C VOS 4 µV TA = +85°C 3
Offset Error at 125°C VOS 6 µV TA = +125°C 3
Positive Full-Scale Error VFS,P -10 2 10 ppm TA = +25°C only 3
Negative Full-Scale Error VFS,N -10 2 10 ppm TA = +25°C only 3
Offset Drift 0.04 ppm/°C 3
Positive/Negative Full-Scale Error Drift 0.028 ppm/°C 3
Common Mode DC Rejection -135 dB VCM range from 0 to VDD 4
Power Supply DC Rejection -115 dB 4
Common Mode 50/60 Hz Rejection CMRR -135 dB VCM varies from 0V to VDD 4
Power Supply 50/60 Hz Rejection PSRR -85 dB MCP3551 only, VDD varies from 4.5V to 5.5V 4
Normal Mode 50 and 60 Hz Rejection NMRR -85 dB MCP3551 only, 0 < VCM < VDD, -VREF < VIN = (VIN + -VIN-) < +VREF 4
Analog Input Sampling Capacitor 10 pF Note 5 4
Differential Input Impedance 2.4 MΩ 4
Shutdown Mode Leakage Current 1 nA VIN+ = VIN- = VDD; CS = VDD (Note 3) 4
Reference Voltage Range 0.1 V 4
Reference Input Sampling Capacitor 15 pF Note 5 4
Reference Input Impedance 2.4 MΩ Note 4 4
Shutdown Mode Reference Leakage Current 1 nA VIN+ = VIN- = VSS; CS = VDD 4
Voltage Input High (CS, SCK) VIH 0.7 VDD 4
Voltage Input Low (CS, SCK) VIL 0.4 V 4
Voltage Output Low (SDO/RDY) VOL 0.4 V VOH = -1 mA, VDD = 5.0V 5
Input Leakage Current (CS, SCK) ILI -1 1 µA 5
Internal Pin Capacitance CINT 5 pF Note 1 5
Specified Temperature Range TA -40 85 °C 5
Operating Temperature Range TA -40 125 °C 5
Thermal Resistance, 8L-SOIC θJA 149.5 °C/W 5
CLK Frequency fSCK 5 MHz VDD = 3.3V or 5.0V, SDO load = 50 pF 5
CLK High tHI 90 ns 5
CLK Low tLO 90 ns 5
CLK fall to output data valid tDO 0 90 ns 5
CS low to indicate RDY state tRDY 0 50 ns 5
CS minimum low time tCSL 8 µs Note 5
RDY flag setup time tSU 20 ns 5
CS rise to output disable tDIS 20 ns 5
CS disable time tCSD 90 ns 5
Power-up to CS LOW tPUCSL 10 µs 5
CS High to Shutdown Mode tCSHSD 10 µs 5
Input/Output Voltage w.r.t VSS (lower limit) -0.3 V All inputs and outputs w.r.t VSS, -0.3V to VDD+0.3V 3
Current at Input Pins -2 2 mA 3
Current at Output and Supply Pins -10 10 mA 3
Storage Temperature -65 150 °C 3
Ambient Temperature with Power Applied -55 125 °C 3
Maximum Junction Temperature TJ 150 °C 3
ESD protection (HBM) 6 kV All pins, HBM 3
ESD protection (MM) 400 V All pins, MM 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Package: MS = Plastic MSOP, 8-lead SN = Plastic SOIC (150 mil Body), 8-lead 37

CAD (KiCad official)

  • Symbol: MCP3551T-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp3551t-e-etched.step / mcp3551t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3551t-e.step / mcp3551t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (40 pp, sha256 87917c931a7d2bf4, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF