Generated by kicad-footprint-generator · KiCad file format 20260206
MCP3551-E
Microchip Tech · Analog To Digital Converters (ADCs) · SOIC-8
MCP3551-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | Single-ended reference voltage input that accepts 0.1V to VDD; reduced reference voltage improves INL, since INL max error is proportional to VREF². |
| 2 | VIN+ | power_in | Non-inverting fully differential analog input; the absolute pin voltage must stay between VSS - 0.3V and VDD + 0.3V, and the differential input range for ensured accuracy is -VREF to +VREF. |
| 3 | VIN- | power_in | Inverting fully differential analog input; the absolute pin voltage must stay between VSS - 0.3V and VDD + 0.3V, with the converted differential voltage defined as VIN = VIN+ - VIN-. |
| 4 | VSS | power_in | Ground pin and current return path for both analog and digital circuitry, to be tied to the analog ground plane where available. |
| 5 | SCK | input | Serial clock digital input operating in SPI mode 1,1 or 0,0, with data latched on the rising edge and shifted out on the falling edge. |
| 6 | SDO/RDY | output | Data output and ready flag: goes active-low when a conversion completes, then shifts out the 24-bit data word (two overflow bits and 22 data bits) on falling SCK edges, and is high-impedance when CS is high. |
| 7 | CS | input | Chip select that gates all communication and starts each conversion on its falling edge; holding it low gives continuous conversions, while raising it before the first conversion completes gives single conversion mode. |
| 8 | VDD | power_in | Positive analog and digital supply, specified for 2.7V to 5.5V operation and requiring a 0.1 µF bypass capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| No Missing Codes (MCP3550/1) | NMC | 22 | bits | At DC (Note 5) | 3 | ||
| Conversion time tolerance (MCP3551) | tCONV | -2 | 2 | % | MCP3551 | 3 | |
| Offset Error | VOS | -12 | 3 | 12 | µV | TA = +25°C | 3 |
| Positive Full-Scale Error | VFS,P | -10 | 2 | 10 | ppm | TA = +25°C only | 3 |
| Negative Full-Scale Error | VFS,N | -10 | 2 | 10 | ppm | TA = +25°C only | 3 |
| Integral Non-Linearity | INL | 2 | 6 | ppm | TA = +25°C only (Note 2) | 3 | |
| Power Supply Voltage Range | VDD | 2.7 | 5.5 | V | 4 | ||
| Supply Current (MCP3550-50, MCP3551) | IDD | 120 | 170 | µA | VDD = 5V | 4 | |
| Supply Current, Shutdown Mode | IDDS | 1 | µA | CS = SCK = VDD | 4 | ||
| Reference Input Voltage Range | 0.1 | V | 4 | ||||
| Voltage Input Low (CS, SCK) | VIL | 0.4 | V | 4 | |||
| Voltage Output Low (SDO/RDY) | VOL | 0.4 | V | VOH = -1 mA, VDD = 5.0V | 5 | ||
| Input Leakage Current (CS, SCK) | ILI | -1 | 1 | µA | 5 | ||
| Specified Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 5 | ||
| CLK Frequency | fSCK | 5 | MHz | 5 | |||
| CLK High | tHI | 90 | ns | 5 | |||
| CLK Low | tLO | 90 | ns | 5 | |||
| CLK fall to output data valid | tDO | 0 | 90 | ns | 5 | ||
| CS low to indicate RDY state | tRDY | 0 | 50 | ns | 5 | ||
| CS minimum low time | tCSL | 8 | µs | 5 | |||
| RDY flag setup time | tSU | 20 | ns | 5 | |||
| CS rise to output disable | tDIS | 20 | ns | 5 | |||
| CS disable time | tCSD | 90 | ns | 5 | |||
| All inputs and outputs w.r.t VSS (lower limit) | -0.3 | V | w.r.t VSS; upper limit printed as VDD + 0.3V | 3 | |||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -10 | 10 | mA | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient temp. with power applied | -55 | 125 | °C | 3 | |||
| ESD protection (HBM) | 6 | kV | HBM | 3 | |||
| ESD protection (MM) | 400 | V | MM | 3 | |||
| Maximum Junction Temperature (TJ) | TJ | 150 | °C | 3 | |||
| Thermal Resistance, 8L-SOIC | JA | 149.5 | °C/W | 5 | |||
| Conversion time (MCP3551) | tCONV | 73.1 | ms | MCP3551 | 3 | ||
| Supply Current, 2.7V (MCP3550-50, MCP3551) | IDD | 100 | µA | VDD = 2.7V | 4 | ||
| Supply Current, Sleep Mode | IDDSL | 10 | µA | 4 | |||
| Output Noise (MCP3550/1) | eN | 2.5 | µVRMS | 3 | |||
| Offset Drift | 0.04 | ppm/°C | 3 | ||||
| Positive/Negative Full-Scale Error Drift | 0.028 | ppm/°C | 3 | ||||
| Power-up to CS LOW | tPUCSL | 10 | µs | 5 | |||
| CS High to Shutdown Mode | tCSHSD | 10 | µs | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package: MS = Plastic MSOP, 8-lead SN = Plastic SOIC (150 mil Body), 8-lead | 37 |
CAD (KiCad official)
- Symbol:
MCP3551-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp3551-e-etched.step/mcp3551-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3551-e.step/mcp3551-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (40 pp, sha256
87917c931a7d2bf4, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).