main
History Download
Ray mcp3428-e-sl: renamed from mcp3428-e, the part it was built from (MCP3428-E/SL); family listed ba71781

MCP3428-E/SL

Microchip Tech · Analog To Digital Converters (ADCs) · SOIC-14

MCP3428-E from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CH1+ input Positive differential analog input pin of channel 1; the voltage on each input pin must stay between VSS-0.3V and VDD+0.3V to avoid ESD diode leakage.
2 CH1- input Negative differential analog input pin of channel 1; it can be tied to VSS for single-ended operation, and the voltage must stay between VSS-0.3V and VDD+0.3V.
3 CH2+ input Positive differential analog input pin of channel 2; the voltage must stay between VSS-0.3V and VDD+0.3V.
4 CH2- input Negative differential analog input pin of channel 2; it can be tied to VSS for single-ended operation, and the voltage must stay between VSS-0.3V and VDD+0.3V.
5 VSS power_in Ground pin and current return path of the device, to be connected to a low-impedance ground plane.
6 VDD power_in Positive supply pin, which must be maintained in the 2.7V to 5.5V range for specified operation and bypassed with about 0.1 µF ceramic plus 10 µF tantalum.
7 SDA bidirectional Open-drain N-channel bidirectional serial data pin of the I2C interface, requiring a pull-up to VDD (5 kΩ to 10 kΩ for standard and fast modes, less than 1 kΩ for high-speed mode).
8 SCL input Open-drain N-channel serial clock input of the I2C interface that accepts only external clocks and requires a pull-up resistor from VDD.
9 Adr0 input I2C address selection pin (see Section 5.3.2 of the datasheet for the address configuration).
10 Adr1 input I2C address selection pin (see Section 5.3.2 of the datasheet for the address configuration).
11 CH3+ input Positive differential analog input pin of channel 3; the voltage must stay between VSS-0.3V and VDD+0.3V.
12 CH3- input Negative differential analog input pin of channel 3; it can be tied to VSS for single-ended operation, and the voltage must stay between VSS-0.3V and VDD+0.3V.
13 CH4+ input Positive differential analog input pin of channel 4; the voltage must stay between VSS-0.3V and VDD+0.3V.
14 CH4- input Negative differential analog input pin of channel 4; it can be tied to VSS for single-ended operation, and the voltage must stay between VSS-0.3V and VDD+0.3V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-14
Category Data Converters
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resolution and No Missing Codes (12-bit mode) 12 Bits DR = 240 SPS 5
Resolution and No Missing Codes (14-bit mode) 14 Bits DR = 60 SPS 5
Resolution and No Missing Codes (16-bit mode) 16 Bits DR = 15 SPS 5
Data Rate (12-bit mode) DR 176 240 328 SPS 12 bits mode 5
Data Rate (14-bit mode) DR 44 60 82 SPS 14 bits mode 5
Data Rate (16-bit mode) DR 11 15 20.5 SPS 16 bits mode 5
Voltage Range VDD 2.7 5.5 V 6
Supply Current during Conversion IDDA 145 180 µA VDD = 5.0V 6
Supply Current during Standby Mode IDDS 0.3 1 µA VDD = 5.0V 6
Low level output voltage VOL 0.4 V IOL = 3 mA 6
Supply Current when I2C bus line is active IDDB 10 µA Device is in standby mode while I2C bus is active 6
Input Leakage Current (high) IILH 1 µA VIH = 5.5V 6
Input Leakage Current (low) IILL -1 µA VIL = GND 6
Pin Capacitance CPIN 4 10 pF 6
I2C Bus Capacitance Cb 400 pF 6
Specified Temperature Range TA -40 85 °C 7
Operating Temperature Range TA -40 125 °C 7
Storage Temperature Range TA -65 150 °C 7
VDD supply voltage VDD 7 V 5
All inputs and outputs -0.4 V Relative to VSS (lower limit VSS -0.4V); upper limit is VDD+0.4V 5
Current at Input Pins -2 2 mA 5
Current at Output and Supply Pins -10 10 mA 5
ESD protection on all pins (HBM) 6 kV HBM 5
ESD protection on all pins (MM) 400 V MM 5
Ambient Temp. with power applied -55 125 °C 5
Maximum Junction Temperature (TJ) TJ 150 °C 5
Thermal Resistance, 14L-SOIC θJA 120 °C/W 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin MS = Plastic Micro Small Outline (MSOP), 8-lead SN = Plastic Small Outline SOIC, 8-lead 53

CAD (KiCad official)

  • Symbol: MCP3428-E
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: mcp3428-e-etched.step / mcp3428-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3428-e.step / mcp3428-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (56 pp, sha256 3d9cc322b8fd7415, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP3428-E/SL. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP3428-E/ST