main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp3424-e: viewers · Ray
mcp3424-e-etched.glb Publish 0.1.0 · Ray
mcp3424-e-etched.step mcp3424-e: factory component page (tier=lcsc) · Ray
mcp3424-e-hero.glb mcp3424-e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp3424-e-hero.overlay.json Publish 0.1.0 · Ray
mcp3424-e-sl-hero.glb Publish 0.1.1 · Ray
mcp3424-e-sl-hero.overlay.json Publish 0.1.1 · Ray
mcp3424-e.glb Publish 0.1.0 · Ray
mcp3424-e.kicad_mod Publish 0.1.0 · Ray
mcp3424-e.kicad_sym Publish 0.1.0 · Ray
mcp3424-e.lbr mcp3424-e-sl: renamed from mcp3424-e, the part it was built from (MCP3424-E/SL); family listed · Ray
mcp3424-e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md mcp3424-e-sl: renamed from mcp3424-e, the part it was built from (MCP3424-E/SL); family listed · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 14 pins · Ray

MCP3424-E/SL

Microchip Tech · Pre-ordered MCUs · SOIC-14

MCP3424-E from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CH1+ input Positive differential analog input pin of channel 1; the voltage on each differential input pin must stay between VSS-0.3V and VDD+0.3V.
2 CH1- input Negative differential analog input pin of channel 1; it can be tied to VSS for single-ended operation, and its voltage must stay between VSS-0.3V and VDD+0.3V.
3 CH2+ input Positive differential analog input pin of channel 2; the voltage on each differential input pin must stay between VSS-0.3V and VDD+0.3V.
4 CH2- input Negative differential analog input pin of channel 2; it can be tied to VSS for single-ended operation, and its voltage must stay between VSS-0.3V and VDD+0.3V.
5 VSS power_in Ground pin and current return path of the device, to be connected to a low-impedance ground plane.
6 VDD power_in Positive supply voltage pin, which must be maintained in the 2.7V to 5.5V range for specified operation.
7 SDA bidirectional Bidirectional serial data pin of the I2C interface, an open-drain N-channel driver that needs a pull-up resistor from VDD.
8 SCL input Serial clock pin of the I2C interface, an open-drain N-channel driver that accepts only external serial clocks and needs a pull-up resistor from VDD.
9 Adr0 input I2C address selection pin that is connected to VDD, VSS or left floating to set the device address.
10 Adr1 input I2C address selection pin that is connected to VDD, VSS or left floating to set the device address.
11 CH3+ input Positive differential analog input pin of channel 3; the voltage on each differential input pin must stay between VSS-0.3V and VDD+0.3V.
12 CH3- input Negative differential analog input pin of channel 3; it can be tied to VSS for single-ended operation, and its voltage must stay between VSS-0.3V and VDD+0.3V.
13 CH4+ input Positive differential analog input pin of channel 4; the voltage on each differential input pin must stay between VSS-0.3V and VDD+0.3V.
14 CH4- input Negative differential analog input pin of channel 4; it can be tied to VSS for single-ended operation, and its voltage must stay between VSS-0.3V and VDD+0.3V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-14
Category Embedded Processors & Controllers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resolution and No Missing Codes (ENOB) at DR = 240 SPS 12 bits DR = 240 SPS 5
Resolution and No Missing Codes (ENOB) at DR = 60 SPS 14 bits DR = 60 SPS 5
Resolution and No Missing Codes (ENOB) at DR = 15 SPS 16 bits DR = 15 SPS 5
Resolution and No Missing Codes (ENOB) at DR = 3.75 SPS 18 bits DR = 3.75 SPS 5
Data Rate (12 bits mode) DR 176 240 328 SPS 12 bits mode 5
Data Rate (14 bits mode) DR 44 60 82 SPS 14 bits mode 5
Data Rate (16 bits mode) DR 11 15 20.5 SPS 16 bits mode 5
Data Rate (18 bits mode) DR 2.75 3.75 5.1 SPS 18 bits mode 5
Integral Non-Linearity INL 10 35 ppm of FSR DR = 3.75 SPS, FSR = Full Scale Range (Note 5) 5
Gain Error 0.05 0.35 % PGA = 1, DR = 3.75 SPS 5
Offset Error VOS 15 55 µV Tested at PGA = 1, DR = 3.75 SPS 6
Voltage Range (VDD) VDD 2.7 5.5 V 6
Supply Current during Conversion IDDA 145 180 µA VDD = 5.0V 6
Supply Current during Standby Mode IDDS 0.3 1 µA VDD = 5.0V 6
Low level output voltage VOL 0.4 V IOL = 3 mA 6
Supply Current when I2C bus line is active IDDB 10 µA Device is in standby mode while I2C bus is active 6
Input Leakage Current (high) IILH 1 µA VIH = 5.5V 6
Input Leakage Current (low) IILL -1 µA VIL = GND 6
Pin Capacitance CPIN 4 10 pF 6
I2C Bus Capacitance Cb 400 pF 6
Specified Temperature Range TA -40 85 °C 7
Operating Temperature Range TA -40 125 °C 7
Storage Temperature Range TA -65 150 °C 7
Supply voltage VDD (absolute maximum) VDD 7 V 5
Current at Input Pins -2 2 mA 5
Current at Output and Supply Pins -10 10 mA 5
Ambient Temp. with power applied -55 125 °C 5
Maximum Junction Temperature (TJ) TJ 150 °C 5
ESD protection on all pins (HBM) 6 kV HBM 5
ESD protection on all pins (MM) 400 V MM 5
Thermal Resistance, 14L-SOIC θJA 95.3 °C/W 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin SL = Plastic SOIC (150 mil Body), 14-lead SN = Plastic SOIC (3.90mm Body), 8-lead, 55

CAD (KiCad official)

  • Symbol: MCP3424-E
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: mcp3424-e-etched.step / mcp3424-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3424-e.step / mcp3424-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 3850891a8c0460ab, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP3424-E/SL. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP3424-E/ST