main
Ray
Publish 0.1.0
096216d
MCP3423-E
Microchip Tech · Analog To Digital Converters (ADCs) · MSOP-10
MCP3423-E from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CH1+ | input | Positive differential analog input pin of channel 1; the voltage on each differential input must stay between VSS-0.3V and VDD+0.3V to avoid ESD diode leakage. |
| 2 | CH1- | input | Negative differential analog input pin of channel 1, which can be tied to VSS for single-ended operation; the voltage must stay between VSS-0.3V and VDD+0.3V. |
| 3 | VSS | power_in | Ground pin and current return path of the device, which must be connected to a low-impedance ground plane. |
| 4 | CH2+ | input | Positive differential analog input pin of channel 2; the voltage on each differential input must stay between VSS-0.3V and VDD+0.3V to avoid ESD diode leakage. |
| 5 | CH2- | input | Negative differential analog input pin of channel 2, which can be tied to VSS for single-ended operation; the voltage must stay between VSS-0.3V and VDD+0.3V. |
| 6 | VDD | power_in | Positive supply voltage pin, which must be maintained in the 2.7V to 5.5V range for specified operation. |
| 7 | SDA | bidirectional | Bidirectional serial data pin of the I2C interface, an open-drain N-channel driver that needs a pull-up resistor from VDD, typically 5 kΩ to 10 kΩ for standard and fast modes and less than 1 kΩ for high speed mode. |
| 8 | SCL | input | Serial clock pin of the I2C interface that accepts only external clocks, an open-drain N-channel driver that needs a pull-up resistor from VDD, typically 5 kΩ to 10 kΩ for standard and fast modes and less than 1 kΩ for high speed mode. |
| 9 | Adr0 | input | I2C address selection pin that is connected to VDD, VSS or left floating to select one of eight device addresses together with Adr1. |
| 10 | Adr1 | input | I2C address selection pin that is connected to VDD, VSS or left floating to select one of eight device addresses together with Adr0. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Data Converters |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resolution (12 bits) | 12 | bits | DR = 240 SPS | 5 | |||
| Resolution (14 bits) | 14 | bits | DR = 60 SPS | 5 | |||
| Resolution (16 bits) | 16 | bits | DR = 15 SPS | 5 | |||
| Resolution (18 bits) | 18 | bits | DR = 3.75 SPS | 5 | |||
| Data Rate | DR | 176 | 240 | 328 | SPS | 12 bits mode | 5 |
| Data Rate | DR | 44 | 60 | 82 | SPS | 14 bits mode | 5 |
| Data Rate | DR | 11 | 15 | 20.5 | SPS | 16 bits mode | 5 |
| Data Rate | DR | 2.75 | 3.75 | 5.1 | SPS | 18 bits mode | 5 |
| Integral Non-Linearity | INL | 10 | 35 | ppm of FSR | DR = 3.75 SPS, FSR = Full Scale Range (Note 5) | 5 | |
| Gain Error | 0.05 | 0.35 | % | PGA = 1, DR = 3.75 SPS | 5 | ||
| Offset Error | VOS | 15 | 55 | µV | Tested at PGA = 1, DR = 3.75 SPS | 6 | |
| Voltage Range | VDD | 2.7 | 5.5 | V | 6 | ||
| Supply Current during Conversion | IDDA | 145 | 180 | µA | VDD = 5.0V | 6 | |
| Supply Current during Standby Mode | IDDS | 0.3 | 1 | µA | VDD = 5.0V | 6 | |
| Low level output voltage | VOL | 0.4 | V | IOL = 3 mA | 6 | ||
| Supply Current when I2C bus line is active | IDDB | 10 | µA | Device is in standby mode while I2C bus is active | 6 | ||
| Input Leakage Current (high) | IILH | 1 | µA | VIH = 5.5V | 6 | ||
| Input Leakage Current (low) | IILL | -1 | µA | VIL = GND | 6 | ||
| Pin capacitance | CPIN | 4 | 10 | pF | 6 | ||
| I2C Bus Capacitance | Cb | 400 | pF | 6 | |||
| Specified Temperature Range | TA | -40 | 85 | °C | 7 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 7 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 7 | ||
| Thermal Resistance, 10L-MSOP | θJA | 202 | °C/W | 7 | |||
| VDD Supply Voltage | VDD | 7 | V | 5 | |||
| Current at Input Pins | -2 | 2 | mA | 5 | |||
| Current at Output and Supply Pins | -10 | 10 | mA | 5 | |||
| Ambient Temp. with power applied | -55 | 125 | °C | 5 | |||
| Maximum Junction Temperature (TJ) | TJ | 150 | °C | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | SL = Plastic SOIC (150 mil Body), 14-lead SN = Plastic SOIC (3.90mm Body), 8-lead, | 55 |
CAD (KiCad official)
- Symbol:
MCP3423-E - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
mcp3423-e-etched.step/mcp3423-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3423-e.step/mcp3423-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (58 pp, sha256
3850891a8c0460ab, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP3423-E
**Microchip Tech** · Analog To Digital Converters (ADCs) · MSOP-10
MCP3423-E from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CH1+ | input | Positive differential analog input pin of channel 1; the voltage on each differential input must stay between VSS-0.3V and VDD+0.3V to avoid ESD diode leakage. |
| 2 | CH1- | input | Negative differential analog input pin of channel 1, which can be tied to VSS for single-ended operation; the voltage must stay between VSS-0.3V and VDD+0.3V. |
| 3 | VSS | power_in | Ground pin and current return path of the device, which must be connected to a low-impedance ground plane. |
| 4 | CH2+ | input | Positive differential analog input pin of channel 2; the voltage on each differential input must stay between VSS-0.3V and VDD+0.3V to avoid ESD diode leakage. |
| 5 | CH2- | input | Negative differential analog input pin of channel 2, which can be tied to VSS for single-ended operation; the voltage must stay between VSS-0.3V and VDD+0.3V. |
| 6 | VDD | power_in | Positive supply voltage pin, which must be maintained in the 2.7V to 5.5V range for specified operation. |
| 7 | SDA | bidirectional | Bidirectional serial data pin of the I2C interface, an open-drain N-channel driver that needs a pull-up resistor from VDD, typically 5 kΩ to 10 kΩ for standard and fast modes and less than 1 kΩ for high speed mode. |
| 8 | SCL | input | Serial clock pin of the I2C interface that accepts only external clocks, an open-drain N-channel driver that needs a pull-up resistor from VDD, typically 5 kΩ to 10 kΩ for standard and fast modes and less than 1 kΩ for high speed mode. |
| 9 | Adr0 | input | I2C address selection pin that is connected to VDD, VSS or left floating to select one of eight device addresses together with Adr1. |
| 10 | Adr1 | input | I2C address selection pin that is connected to VDD, VSS or left floating to select one of eight device addresses together with Adr0. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Data Converters |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resolution (12 bits) | | 12 | | | bits | DR = 240 SPS | 5 |
| Resolution (14 bits) | | 14 | | | bits | DR = 60 SPS | 5 |
| Resolution (16 bits) | | 16 | | | bits | DR = 15 SPS | 5 |
| Resolution (18 bits) | | 18 | | | bits | DR = 3.75 SPS | 5 |
| Data Rate | DR | 176 | 240 | 328 | SPS | 12 bits mode | 5 |
| Data Rate | DR | 44 | 60 | 82 | SPS | 14 bits mode | 5 |
| Data Rate | DR | 11 | 15 | 20.5 | SPS | 16 bits mode | 5 |
| Data Rate | DR | 2.75 | 3.75 | 5.1 | SPS | 18 bits mode | 5 |
| Integral Non-Linearity | INL | | 10 | 35 | ppm of FSR | DR = 3.75 SPS, FSR = Full Scale Range (Note 5) | 5 |
| Gain Error | | | 0.05 | 0.35 | % | PGA = 1, DR = 3.75 SPS | 5 |
| Offset Error | VOS | | 15 | 55 | µV | Tested at PGA = 1, DR = 3.75 SPS | 6 |
| Voltage Range | VDD | 2.7 | | 5.5 | V | | 6 |
| Supply Current during Conversion | IDDA | | 145 | 180 | µA | VDD = 5.0V | 6 |
| Supply Current during Standby Mode | IDDS | | 0.3 | 1 | µA | VDD = 5.0V | 6 |
| Low level output voltage | VOL | | | 0.4 | V | IOL = 3 mA | 6 |
| Supply Current when I2C bus line is active | IDDB | | | 10 | µA | Device is in standby mode while I2C bus is active | 6 |
| Input Leakage Current (high) | IILH | | | 1 | µA | VIH = 5.5V | 6 |
| Input Leakage Current (low) | IILL | -1 | | | µA | VIL = GND | 6 |
| Pin capacitance | CPIN | | 4 | 10 | pF | | 6 |
| I2C Bus Capacitance | Cb | | | 400 | pF | | 6 |
| Specified Temperature Range | TA | -40 | | 85 | °C | | 7 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 7 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 7 |
| Thermal Resistance, 10L-MSOP | θJA | | 202 | | °C/W | | 7 |
| VDD Supply Voltage | VDD | | | 7 | V | | 5 |
| Current at Input Pins | | -2 | | 2 | mA | | 5 |
| Current at Output and Supply Pins | | -10 | | 10 | mA | | 5 |
| Ambient Temp. with power applied | | -55 | | 125 | °C | | 5 |
| Maximum Junction Temperature (TJ) | TJ | | | 150 | °C | | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | SL = Plastic SOIC (150 mil Body), 14-lead SN = Plastic SOIC (3.90mm Body), 8-lead, | 55 |
## CAD (KiCad official)
- Symbol: `MCP3423-E`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files: `mcp3423-e-etched.step` / `mcp3423-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp3423-e.step` / `mcp3423-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/22088c.pdf) (58 pp, sha256 `3850891a8c0460ab`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp3423-e-datasheet.pdf)