component

MCP3422A0-E

Public Made by Adom

by adom

Microchip Tech Analog To Digital Converters (ADCs), SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentadc-dac-data conversionmcp3422a0-efactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
mcp3422a0-e / README.md
History Download
Ray Publish 0.1.0 1b442ed 12d ago

MCP3422A0-E

Microchip Tech · Analog To Digital Converters (ADCs) · SOIC-8

MCP3422A0-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CH1+ input Positive differential analog input of channel 1; input voltage range is VSS-0.3V to VDD+0.3V.
2 CH1- input Negative differential analog input of channel 1; may be tied to VSS for single-ended operation, range VSS-0.3V to VDD+0.3V.
3 VDD power_in Positive supply voltage pin, 2.7V to 5.5V for specified operation, bypassed with about 0.1 µF ceramic plus a recommended 10 µF tantalum capacitor to ground.
4 SDA bidirectional Bidirectional open-drain serial data pin of the I2C interface that needs a pull-up resistor to VDD (5 kΩ to 10 kΩ for standard/fast mode, less than 1 kΩ for high-speed mode).
5 SCL input I2C serial clock input (slave only, open-drain N-channel) that needs a pull-up resistor to VDD (5 kΩ to 10 kΩ for standard/fast mode, less than 1 kΩ for high-speed mode).
6 VSS power_in Ground pin and current return path, to be connected to a ground plane through a low impedance connection.
7 CH2+ input Positive differential analog input of channel 2; input voltage range is VSS-0.3V to VDD+0.3V.
8 CH2- input Negative differential analog input of channel 2; may be tied to VSS for single-ended operation, range VSS-0.3V to VDD+0.3V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category ADC/DAC/Data Conversion
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 2.7 5.5 V 6
Supply Current during Conversion IDDA 145 180 µA VDD = 5.0V 6
Supply Current during Conversion IDDA 135 µA VDD = 3.0V 6
Supply Current during Standby Mode IDDS 0.3 1 µA VDD = 5.0V 6
Maximum Input Voltage Range -0.3 0.3 V VSS-0.3 to VDD+0.3 (Note 1) 5
Resolution and No Missing Codes 12 Bits DR = 240 SPS 5
Resolution and No Missing Codes 14 Bits DR = 60 SPS 5
Resolution and No Missing Codes 16 Bits DR = 15 SPS 5
Resolution and No Missing Codes 18 Bits DR = 3.75 SPS 5
Data Rate DR 176 240 328 SPS 12 bits mode 5
Data Rate DR 44 60 82 SPS 14 bits mode 5
Data Rate DR 11 15 20.5 SPS 16 bits mode 5
Data Rate DR 2.75 3.75 5.1 SPS 18 bits mode 5
Integral Non-Linearity INL 10 35 ppm of FSR DR = 3.75 SPS, FSR = Full Scale Range (Note 5) 5
Gain Error 0.05 0.35 % PGA = 1, DR = 3.75 SPS 5
Offset Error VOS 15 55 µV Tested at PGA = 1, DR = 3.75 SPS 6
High level input voltage VIH 0.7 1 V at SDA and SCL pins; min 0.7VDD, max VDD (values in multiples of VDD) 6
Low level input voltage VIL 0.3 V at SDA and SCL pins; max 0.3VDD (multiple of VDD) 6
Low level output voltage VOL 0.4 V IOL = 3 mA 6
Hysteresis of Schmidt Trigger VHYST 0.05 V fSCL = 100 kHz; min 0.05VDD (multiple of VDD) 6
Supply Current when I2C bus line is active IDDB 10 µA Device is in standby mode while I2C bus is active 6
Input Leakage Current IILH 1 µA VIH = 5.5V 6
Input Leakage Current IILL -1 µA VIL = GND 6
Pin capacitance CPIN 4 10 pF 6
I2C Bus Capacitance Cb 400 pF 6
Specified Temperature Range TA -40 85 °C 7
Operating Temperature Range TA -40 125 °C 7
Storage Temperature Range TA -65 150 °C 7
Supply voltage VDD 7 V 5
Voltage on all inputs and outputs -0.4 0.4 V VSS -0.4V to VDD+0.4V 5
Current at Input Pins -2 2 mA 5
Current at Output and Supply Pins -10 10 mA 5
Storage Temperature -65 150 °C 5
Ambient Temp. with power applied -55 125 °C 5
Maximum Junction Temperature TJ 150 °C 5
Thermal Resistance, 8L-SOIC θJA 149.5 °C/W 7
Differential Input Impedance ZIND 2.25 MΩ 2.25/PGA, during normal mode operation (Note 2) 5
Common Mode input Impedance ZINC 25 MΩ PGA = 1, 2, 4, 8 5
Output Noise 1.5 µVRMS TA = +25°C, DR = 3.75 SPS, PGA = 1, VIN+ = VIN- = GND 5
PGA Gain Error Match 0.1 % Between any 2 PGA settings 6
Gain Error Drift 15 ppm/°C PGA=1, DR=3.75 SPS 6
Offset Drift vs. Temperature 50 nV/°C 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin SL = Plastic SOIC (150 mil Body), 14-lead SN = Plastic SOIC (3.90mm Body), 8-lead, 55

CAD (KiCad official)

  • Symbol: MCP3422A0-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp3422a0-e-etched.step / mcp3422a0-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3422a0-e.step / mcp3422a0-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 3850891a8c0460ab, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF