main
Ray
Publish 0.1.1
243820c
MCP3221A5T-I
Microchip Tech · Analog To Digital Converters (ADCs) · SOT-23-5
MCP3221A5T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supplies power to the device (+2.7V to 5.5V) and provides the voltage reference for the conversion process. |
| 2 | VSS | power_in | Ground reference for the device; all voltages are referenced to VSS. |
| 3 | AIN | input | Single-ended analog input to the sample-and-hold circuit; for proper conversions the voltage must stay between VSS and VDD. |
| 4 | SDA | bidirectional | Open-drain I2C serial data pin that requires a pull-up resistor to VDD (typically 10 kΩ at 100 kHz or 2 kΩ at 400 kHz SCL). |
| 5 | SCL | input | Open-drain I2C serial clock input that requires a pull-up resistor to VDD (typically 10 kΩ at 100 kHz or 2 kΩ at 400 kHz SCL). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Data Converters |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity | INL | -2 | 0.75 | 2 | LSB | 3 | |
| Differential Nonlinearity | DNL | -1 | 0.5 | 1 | LSB | No missing codes | 3 |
| Offset Error | -2 | 0.75 | 2 | LSB | 3 | ||
| Gain Error | -3 | -1 | 3 | LSB | 3 | ||
| Analog Input Leakage Current | -1 | 1 | µA | 3 | |||
| Low-Level Output Voltage (SDA/SCL) | VOL | 0.4 | V | IOL = 3 mA, RPU = 1.53 k | 3 | ||
| Input Leakage Current (SDA/SCL) | ILI | -1 | 1 | µA | VIN = 0.1 VDD and 0.9 VDD | 3 | |
| Output Leakage Current (SDA) | ILO | -1 | 1 | µA | VOUT = 0.1 VSS and 0.9 VDD | 3 | |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | TA = 25°C, f = 1 MHz; (Note 2) | 4 | ||
| Bus Capacitance | CB | 400 | pF | SDA drive low, 0.4V | 4 | ||
| Operating Voltage | VDD | 2.7 | 5.5 | V | 4 | ||
| Conversion Current | IDD | 175 | 250 | µA | 4 | ||
| Standby Current | IDDS | 0.005 | 1 | µA | SDA, SCL = VDD | 4 | |
| Active Bus Current | IDDA | 120 | µA | Note 4 | 4 | ||
| Sample Rate | fSAMP | 22.3 | ksps | fSCL = 400 kHz (Note 1) | 4 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Extended Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| I2C Standard Mode Clock Frequency | fSCL | 0 | 100 | kHz | 5 | ||
| I2C Standard Mode Clock High Time | THIGH | 4000 | ns | 5 | |||
| I2C Standard Mode Clock Low Time | TLOW | 4700 | ns | 5 | |||
| I2C Standard Mode SDA and SCL Rise Time | TR | 1000 | ns | From VIL to VIH (Note 1) | 5 | ||
| I2C Standard Mode SDA and SCL Fall Time | TF | 300 | ns | From VIL to VIH (Note 1) | 5 | ||
| I2C Standard Mode Start Condition Hold Time | THD:STA | 4000 | ns | 5 | |||
| I2C Standard Mode Start Condition Setup Time | TSU:STA | 4700 | ns | 5 | |||
| I2C Standard Mode Data Input Setup Time | TSU:DAT | 250 | ns | 5 | |||
| I2C Standard Mode Stop Condition Setup Time | TSU:STO | 4000 | ns | 5 | |||
| I2C Standard Mode Stop Condition Hold Time | THD:STD | 4000 | ns | 5 | |||
| I2C Standard Mode Output Valid from Clock | TAA | 3500 | ns | 5 | |||
| I2C Standard Mode Bus Free Time | TBUF | 4700 | ns | Note 2 | 5 | ||
| I2C Standard Mode Input Filter Spike Suppression | TSP | 50 | ns | SDA and SCL pins (Note 1) | 5 | ||
| I2C Fast Mode Clock Frequency | FSCL | 0 | 400 | kHz | 5 | ||
| I2C Fast Mode Clock High Time | THIGH | 600 | ns | 5 | |||
| I2C Fast Mode Clock Low Time | TLOW | 1300 | ns | 5 | |||
| I2C Fast Mode SDA and SCL Rise Time | TR | 300 | ns | From VIL to VIH (Note 1) | 5 | ||
| I2C Fast Mode SDA and SCL Fall Time | TF | 300 | ns | From VIL to VIH (Note 1) | 5 | ||
| I2C Fast Mode Start Condition Hold Time | THD:STA | 600 | ns | 5 | |||
| I2C Fast Mode Start Condition Setup Time | TSU:STA | 600 | ns | 5 | |||
| I2C Fast Mode Data Input Hold Time | THD:DAT | 0 | 0.9 | ms | 5 | ||
| I2C Fast Mode Data Input Setup Time | TSU:DAT | 100 | ns | 5 | |||
| I2C Fast Mode Stop Condition Setup Time | TSU:STO | 600 | ns | 5 | |||
| I2C Fast Mode Stop Condition Hold Time | THD:STD | 600 | ns | 5 | |||
| I2C Fast Mode Output Valid from Clock | TAA | 900 | ns | 5 | |||
| I2C Fast Mode Bus Free Time | TBUF | 1300 | ns | Note 2 | 5 | ||
| I2C Fast Mode Input Filter Spike Suppression | TSP | 50 | ns | SDA and SCL pins (Note 1) | 5 | ||
| Supply Voltage (absolute maximum) | VDD | 7 | V | 3 | |||
| Analog input pin voltage w.r.t. VSS | -0.6 | V | 3 | ||||
| SDA and SCL pins voltage w.r.t. VSS | -0.6 | V | 3 | ||||
| Ambient Temperature with power applied | -65 | 125 | °C | 3 | |||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| ESD protection on all pins (HBM) | 4 | kV | 3 | ||||
| Thermal Resistance, SOT-23 | θJA | 256 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP3221A5T-I - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.63 x 2.95 mm, terminals on the pads, 1.18 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp3221a5t-i-ot-etched.step/mcp3221a5t-i-ot-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3221a5t-i-ot.step/mcp3221a5t-i-ot.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
6e11b59a236328b7, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# MCP3221A5T-I
**Microchip Tech** · Analog To Digital Converters (ADCs) · SOT-23-5
MCP3221A5T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supplies power to the device (+2.7V to 5.5V) and provides the voltage reference for the conversion process. |
| 2 | VSS | power_in | Ground reference for the device; all voltages are referenced to VSS. |
| 3 | AIN | input | Single-ended analog input to the sample-and-hold circuit; for proper conversions the voltage must stay between VSS and VDD. |
| 4 | SDA | bidirectional | Open-drain I2C serial data pin that requires a pull-up resistor to VDD (typically 10 kΩ at 100 kHz or 2 kΩ at 400 kHz SCL). |
| 5 | SCL | input | Open-drain I2C serial clock input that requires a pull-up resistor to VDD (typically 10 kΩ at 100 kHz or 2 kΩ at 400 kHz SCL). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Data Converters |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity | INL | -2 | 0.75 | 2 | LSB | | 3 |
| Differential Nonlinearity | DNL | -1 | 0.5 | 1 | LSB | No missing codes | 3 |
| Offset Error | | -2 | 0.75 | 2 | LSB | | 3 |
| Gain Error | | -3 | -1 | 3 | LSB | | 3 |
| Analog Input Leakage Current | | -1 | | 1 | µA | | 3 |
| Low-Level Output Voltage (SDA/SCL) | VOL | | | 0.4 | V | IOL = 3 mA, RPU = 1.53 k | 3 |
| Input Leakage Current (SDA/SCL) | ILI | -1 | | 1 | µA | VIN = 0.1 VDD and 0.9 VDD | 3 |
| Output Leakage Current (SDA) | ILO | -1 | | 1 | µA | VOUT = 0.1 VSS and 0.9 VDD | 3 |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | | | 10 | pF | TA = 25°C, f = 1 MHz; (Note 2) | 4 |
| Bus Capacitance | CB | | | 400 | pF | SDA drive low, 0.4V | 4 |
| Operating Voltage | VDD | 2.7 | | 5.5 | V | | 4 |
| Conversion Current | IDD | | 175 | 250 | µA | | 4 |
| Standby Current | IDDS | | 0.005 | 1 | µA | SDA, SCL = VDD | 4 |
| Active Bus Current | IDDA | | | 120 | µA | Note 4 | 4 |
| Sample Rate | fSAMP | | | 22.3 | ksps | fSCL = 400 kHz (Note 1) | 4 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 4 |
| Extended Temperature Range | TA | -40 | | 125 | °C | | 4 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |
| I2C Standard Mode Clock Frequency | fSCL | 0 | | 100 | kHz | | 5 |
| I2C Standard Mode Clock High Time | THIGH | 4000 | | | ns | | 5 |
| I2C Standard Mode Clock Low Time | TLOW | 4700 | | | ns | | 5 |
| I2C Standard Mode SDA and SCL Rise Time | TR | | | 1000 | ns | From VIL to VIH (Note 1) | 5 |
| I2C Standard Mode SDA and SCL Fall Time | TF | | | 300 | ns | From VIL to VIH (Note 1) | 5 |
| I2C Standard Mode Start Condition Hold Time | THD:STA | 4000 | | | ns | | 5 |
| I2C Standard Mode Start Condition Setup Time | TSU:STA | 4700 | | | ns | | 5 |
| I2C Standard Mode Data Input Setup Time | TSU:DAT | 250 | | | ns | | 5 |
| I2C Standard Mode Stop Condition Setup Time | TSU:STO | 4000 | | | ns | | 5 |
| I2C Standard Mode Stop Condition Hold Time | THD:STD | 4000 | | | ns | | 5 |
| I2C Standard Mode Output Valid from Clock | TAA | | | 3500 | ns | | 5 |
| I2C Standard Mode Bus Free Time | TBUF | 4700 | | | ns | Note 2 | 5 |
| I2C Standard Mode Input Filter Spike Suppression | TSP | | | 50 | ns | SDA and SCL pins (Note 1) | 5 |
| I2C Fast Mode Clock Frequency | FSCL | 0 | | 400 | kHz | | 5 |
| I2C Fast Mode Clock High Time | THIGH | 600 | | | ns | | 5 |
| I2C Fast Mode Clock Low Time | TLOW | 1300 | | | ns | | 5 |
| I2C Fast Mode SDA and SCL Rise Time | TR | | | 300 | ns | From VIL to VIH (Note 1) | 5 |
| I2C Fast Mode SDA and SCL Fall Time | TF | | | 300 | ns | From VIL to VIH (Note 1) | 5 |
| I2C Fast Mode Start Condition Hold Time | THD:STA | 600 | | | ns | | 5 |
| I2C Fast Mode Start Condition Setup Time | TSU:STA | 600 | | | ns | | 5 |
| I2C Fast Mode Data Input Hold Time | THD:DAT | 0 | | 0.9 | ms | | 5 |
| I2C Fast Mode Data Input Setup Time | TSU:DAT | 100 | | | ns | | 5 |
| I2C Fast Mode Stop Condition Setup Time | TSU:STO | 600 | | | ns | | 5 |
| I2C Fast Mode Stop Condition Hold Time | THD:STD | 600 | | | ns | | 5 |
| I2C Fast Mode Output Valid from Clock | TAA | | | 900 | ns | | 5 |
| I2C Fast Mode Bus Free Time | TBUF | 1300 | | | ns | Note 2 | 5 |
| I2C Fast Mode Input Filter Spike Suppression | TSP | | | 50 | ns | SDA and SCL pins (Note 1) | 5 |
| Supply Voltage (absolute maximum) | VDD | | | 7 | V | | 3 |
| Analog input pin voltage w.r.t. VSS | | -0.6 | | | V | | 3 |
| SDA and SCL pins voltage w.r.t. VSS | | -0.6 | | | V | | 3 |
| Ambient Temperature with power applied | | -65 | | 125 | °C | | 3 |
| Maximum Junction Temperature | | | | 150 | °C | | 3 |
| ESD protection on all pins (HBM) | | 4 | | | kV | | 3 |
| Thermal Resistance, SOT-23 | θJA | | 256 | | °C/W | | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `MCP3221A5T-I`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.63 x 2.95 mm, terminals on the pads, 1.18 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `mcp3221a5t-i-ot-etched.step` / `mcp3221a5t-i-ot-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp3221a5t-i-ot.step` / `mcp3221a5t-i-ot.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/devicedoc/20001732e.pdf) (30 pp, sha256 `6e11b59a236328b7`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/mcp3221a5t-i-ot-datasheet.pdf)