main
Ray Publish 0.1.0 a564914

MCP3221A0T-E

Microchip Tech · Analog To Digital Converters (ADCs) · SOT-23-5

MCP3221A0T-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in +2.7V to 5.5V power supply that also serves as the voltage reference for the conversion; bypass with 0.1 µF placed close to the pin (absolute maximum +7.0V).
2 VSS power_in Ground.
3 AIN input Single-ended analog input to the sample-and-hold of the SAR converter; voltage should be kept between VSS and VDD for proper conversions.
4 SDA bidirectional Open-drain I2C serial data line for addresses and data in and out, needing a pull-up to VDD (typically 10 kΩ for 100 kHz and 2 kΩ for 400 kHz).
5 SCL input Open-drain I2C serial clock input that synchronizes data transfer on SDA, needing a pull-up to VDD (typically 10 kΩ for 100 kHz and 2 kΩ for 400 kHz).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Data Converters
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Integral Nonlinearity INL 0.75 2 LSB VDD=5.0V, TA=-40°C to +85°C (typ/max printed ±) 3
Differential Nonlinearity DNL 0.5 1 LSB No missing codes (typ/max printed ±) 3
Offset Error 2 LSB typ 0.75 not tabulated as typ; max printed ±2 3
Gain Error -1 3 LSB max printed ±3 3
Analog Input Voltage Range -0.3 V VSS-0.3 to VDD+0.3, 2.7V ≤ VDD ≤ 5.5V 3
Analog Input Leakage Current -1 1 µA 3
High-Level Input Voltage VIH 0.7 V 0.7 VDD (min printed as multiple of VDD) 3
Low-Level Input Voltage VIL 0.3 V 0.3 VDD (max printed as multiple of VDD) 3
Low-Level Output Voltage VOL 0.4 V IOL = 3 mA, RPU = 1.53 k 3
Input Leakage Current ILI -1 1 µA VIN = 0.1 VDD and 0.9 VDD 3
Output Leakage Current ILO -1 1 µA VOUT = 0.1 VSS and 0.9 VDD 3
Pin Capacitance CIN, COUT 10 pF TA = 25°C, f = 1 MHz; (Note 2) 4
Bus Capacitance CB 400 pF SDA drive low, 0.4V 4
Operating Voltage VDD 2.7 5.5 V 4
Conversion Current IDD 175 250 µA 4
Standby Current IDDS 0.005 1 µA SDA, SCL = VDD 4
Active Bus Current IDDA 120 µA Note 4 4
Sample Rate fSAMP 22.3 ksps fSCL = 400 kHz (Note 1) 4
Conversion Time tCONV 8.96 µs Note 5 4
Analog Input Acquisition Time tACQ 1.12 µs Note 5 4
Operating Temperature Range TA -40 125 °C 4
Storage Temperature Range TA -65 150 °C 4
Thermal Resistance, SOT-23 θJA 256 °C/W 4
Supply Voltage VDD 7 V 3
Analog input pin w.r.t. VSS -0.6 0.6 V -0.6V to VDD +0.6V (max is VDD+0.6V) 3
SDA and SCL pins w.r.t. VSS -0.6 1 V -0.6V to VDD +1.0V (max is VDD+1.0V) 3
Storage Temperature -65 150 °C 3
Ambient Temperature with power applied -65 125 °C 3
Maximum Junction Temperature 150 °C 3
ESD protection on all pins (HBM) 4 kV ≥ 4 kV 3
I2C Standard Clock Frequency fSCL 0 100 kHz Standard mode 5
I2C Standard Clock High Time THIGH 4000 ns Standard mode 5
I2C Standard Clock Low Time TLOW 4700 ns Standard mode 5
I2C Standard SDA/SCL Rise Time TR 1000 ns From VIL to VIH (Note 1) 5
I2C Standard SDA/SCL Fall Time TF 300 ns From VIL to VIH (Note 1) 5
I2C Standard Start Hold Time THD:STA 4000 ns Standard mode 5
I2C Standard Start Setup Time TSU:STA 4700 ns Standard mode 5
I2C Standard Data Input Setup Time TSU:DAT 250 ns Standard mode 5
I2C Standard Stop Setup Time TSU:STO 4000 ns Standard mode 5
I2C Standard Stop Hold Time THD:STD 4000 ns Standard mode 5
I2C Standard Output Valid from Clock TAA 3500 ns Standard mode 5
I2C Standard Bus Free Time TBUF 4700 ns Note 2 5
I2C Standard Spike Suppression TSP 50 ns SDA and SCL pins (Note 1) 5
I2C Fast Clock Frequency FSCL 0 400 kHz Fast mode 5
I2C Fast Clock High Time THIGH 600 ns Fast mode 5
I2C Fast Clock Low Time TLOW 1300 ns Fast mode 5
I2C Fast SDA/SCL Rise Time TR 300 ns From VIL to VIH (Note 1); min printed 20 + 0.1CB 5
I2C Fast SDA/SCL Fall Time TF 300 ns From VIL to VIH (Note 1); min printed 20 + 0.1CB 5
I2C Fast Start Hold Time THD:STA 600 ns Fast mode 5
I2C Fast Start Setup Time TSU:STA 600 ns Fast mode 5
I2C Fast Data Input Hold Time THD:DAT 0 0.9 ms Fast mode, unit as printed 5
I2C Fast Data Input Setup Time TSU:DAT 100 ns Fast mode 5
I2C Fast Stop Setup Time TSU:STO 600 ns Fast mode 5
I2C Fast Stop Hold Time THD:STD 600 ns Fast mode 5
I2C Fast Output Valid from Clock TAA 900 ns Fast mode 5
I2C Fast Bus Free Time TBUF 1300 ns Note 2 5
I2C Fast Spike Suppression TSP 50 ns SDA and SCL pins (Note 1) 5
Resolution 12 bits 3
Total Harmonic Distortion THD -82 dB VIN = 0.1V to 4.9V @ 1 kHz 3
Signal-to-Noise and Distortion SINAD 72 dB VIN = 0.1V to 4.9V @ 1 kHz 3
Spurious Free Dynamic Range SFDR 86 dB VIN = 0.1V to 4.9V @ 1 kHz 3
Hysteresis of Schmitt Trigger Inputs VHYST 0.05 V 0.05 VDD; fSCL = 400 kHz only 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MCP3221A0T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.63 x 2.95 mm, terminals on the pads, 1.18 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp3221a0t-e-ot-etched.step / mcp3221a0t-e-ot-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp3221a0t-e-ot.step / mcp3221a0t-e-ot.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (30 pp, sha256 6e11b59a236328b7, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF