3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP3021A6T-E
Microchip Tech · Analog To Digital Converters (ADCs) · SOT-23-5
MCP3021A6T-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply of +2.7V to 5.5V that also serves as the voltage reference for the conversion; bypass with 0.1 µF placed close to the pin. |
| 2 | VSS | power_in | Ground. |
| 3 | AIN | input | Single-ended analog input to the sample and hold circuit of the SAR converter, valid from VSS to VDD and best driven from a low source impedance. |
| 4 | SDA | bidirectional | Open-drain I2C serial data pin for addresses and data in and out, needing a pull-up to VDD (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz). |
| 5 | SCL | input | Open-drain I2C serial clock input that synchronizes data transfer on SDA, needing a pull-up to VDD (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | ADC/DAC/Data Conversion |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity | INL | -1 | 0.25 | 1 | LSB | 3 | |
| Differential Nonlinearity | DNL | -1 | 0.25 | 1 | LSB | No missing codes | 3 |
| Offset Error | -3 | 0.75 | 3 | LSB | 3 | ||
| Gain Error | -3 | -1 | 3 | LSB | 3 | ||
| Analog Input Leakage Current | -1 | 1 | µA | 3 | |||
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 3 mA, RPU = 1.53 k | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS to VDD | 4 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS to VDD | 4 | |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | TA = 25°C, f = 1 MHz | 4 | ||
| Bus Capacitance | CB | 400 | pF | SDA drive low, 0.4V | 4 | ||
| Operating Voltage | VDD | 2.7 | 5.5 | V | 4 | ||
| Conversion Current | IDD | 175 | 250 | µA | 4 | ||
| Standby Current | IDDS | 0.005 | 1 | µA | SDA, SCL = VDD | 4 | |
| Active Bus Current | IDDA | 120 | µA | Note 4 | 4 | ||
| Sample Rate | fSAMP | 22.3 | ksps | fSCL = 400 kHz (Note 1) | 4 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Extended Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| VDD Supply Voltage (absolute maximum) | VDD | 7 | V | 3 | |||
| Analog Input Pin w.r.t. VSS (lower limit) | -0.6 | V | w.r.t. VSS | 3 | |||
| SDA and SCL Pins w.r.t. VSS (lower limit) | -0.6 | V | w.r.t. VSS | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temperature with Power Applied | -65 | 125 | °C | with power applied | 3 | ||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| ESD Protection on All Pins | 4 | kV | HBM | 3 | |||
| Clock Frequency (I2C Standard Mode) | fSCL | 0 | 100 | kHz | 5 | ||
| Clock High Time (Standard Mode) | THIGH | 4000 | ns | 5 | |||
| Clock Low Time (Standard Mode) | TLOW | 4700 | ns | 5 | |||
| SDA and SCL Rise Time (Standard Mode) | TR | 1000 | ns | From VIL to VIH (Note 1) | 5 | ||
| SDA and SCL Fall Time (Standard Mode) | TF | 300 | ns | From VIL to VIH (Note 1) | 5 | ||
| Start Condition Hold Time (Standard Mode) | THD:STA | 4000 | ns | 5 | |||
| Start Condition Setup Time (Standard Mode) | TSU:STA | 4700 | ns | 5 | |||
| Data Input Setup Time (Standard Mode) | TSU:DAT | 250 | ns | 5 | |||
| Stop Condition Setup Time (Standard Mode) | TSU:STO | 4000 | ns | 5 | |||
| Stop Condition Hold Time (Standard Mode) | THD:STD | 4000 | ns | 5 | |||
| Output Valid from Clock (Standard Mode) | TAA | 3500 | ns | 5 | |||
| Bus Free Time (Standard Mode) | TBUF | 4700 | ns | Note 2 | 5 | ||
| Input Filter Spike Suppression (Standard Mode) | TSP | 50 | ns | SDA and SCL pins (Note 1) | 5 | ||
| Clock Frequency (I2C Fast Mode) | FSCL | 0 | 400 | kHz | 5 | ||
| Clock High Time (Fast Mode) | THIGH | 600 | ns | 5 | |||
| Clock Low Time (Fast Mode) | TLOW | 1300 | ns | 5 | |||
| SDA and SCL Rise Time (Fast Mode) | TR | 300 | ns | From VIL to VIH (Note 1) | 5 | ||
| SDA and SCL Fall Time (Fast Mode) | TF | 300 | ns | From VIL to VIH (Note 1) | 5 | ||
| Start Condition Hold Time (Fast Mode) | THD:STA | 600 | ns | 5 | |||
| Start Condition Setup Time (Fast Mode) | TSU:STA | 600 | ns | 5 | |||
| Data Input Hold Time (Fast Mode) | THD:DAT | 0 | 0.9 | ms | 5 | ||
| Data Input Setup Time (Fast Mode) | TSU:DAT | 100 | ns | 5 | |||
| Stop Condition Setup Time (Fast Mode) | TSU:STO | 600 | ns | 5 | |||
| Stop Condition Hold Time (Fast Mode) | THD:STD | 600 | ns | 5 | |||
| Output Valid from Clock (Fast Mode) | TAA | 900 | ns | 5 | |||
| Bus Free Time (Fast Mode) | TBUF | 1300 | ns | Note 2 | 5 | ||
| Input Filter Spike Suppression (Fast Mode) | TSP | 50 | ns | SDA and SCL pins (Note 1) | 5 | ||
| Thermal Resistance, SOT-23 | JA | 256 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP3021A6T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.63 x 2.95 mm, terminals on the pads, 1.18 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp3021a6t-e-ot-etched.step/mcp3021a6t-e-ot-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp3021a6t-e-ot.step/mcp3021a6t-e-ot.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
b537f2ff54777b6b, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).