3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP2562T-H
Microchip Tech · Pre-ordered MCUs · SOIC-8
MCP2562T-H from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | Transmit data input: Low drives CANH and CANL dominant and High lets them go recessive, with an internal pull-up resistor (nominal 33 k) to VIO on the MCP2562. |
| 2 | VSS | power_in | Ground supply pin. |
| 3 | VDD | power_in | Positive supply voltage pin that supplies the transmitter and receiver, including the wake-up receiver, over 4.5V to 5.5V. |
| 4 | RXD | output | CMOS-compatible receive data output that is High when the bus is recessive and Low when dominant, supplied by VIO on the MCP2562. |
| 5 | VIO | power_in | Supply for the digital I/O pins (TXD, RXD and STBY) on the MCP2562, operating from 1.8V to 5.5V. |
| 6 | CANL | bidirectional | CAN low-level voltage I/O that drives the Low side of the differential bus and disconnects from the bus when the device is not powered. |
| 7 | CANH | bidirectional | CAN high-level voltage I/O that drives the high side of the differential bus and disconnects from the bus when the device is not powered. |
| 8 | STBY | input | Standby mode input that selects Standby mode when High and Normal mode when Low, with an internal MOS pull-up to VIO on the MCP2562. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | P = Plastic Dual In-Line - 300 mil Body, 8-lead SN = Plastic Small Outline - Narrow, 3.90 mm Body, | 27 |
CAD (KiCad official)
- Symbol:
MCP2562T-H - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp2562t-h-etched.step/mcp2562t-h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp2562t-h.step/mcp2562t-h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
c36b24e45446d8a1, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).