Generated by kicad-footprint-generator · KiCad file format 20260206
MCP2551T-I
Microchip Tech · CAN Transceivers · SOIC-8
MCP2551T-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | TTL-compatible transmit data input; Low drives CANH/CANL Dominant and High releases them to Recessive, with an internal nominal 25 kΩ pull-up to VDD. |
| 2 | VSS | power_in | Ground supply pin. |
| 3 | VDD | power_in | Positive supply voltage pin, specified for 4.5 V to 5.5 V operation. |
| 4 | RXD | output | CMOS-compatible receive data output that is High when the bus is Recessive and Low when the bus is Dominant. |
| 5 | VREF | power_out | Reference voltage output defined as VDD/2, specified for load currents of -50 µA to 50 µA. |
| 6 | CANL | bidirectional | CAN Low bus line that drives the low side of the differential bus and is tied internally to the receive comparator; DC voltage limit is -42 V to +42 V. |
| 7 | CANH | bidirectional | CAN High bus line that drives the high side of the differential bus and is tied internally to the receive comparator; DC voltage limit is -42 V to +42 V. |
| 8 | RS | input | Mode select: tie to VSS for High-Speed, use an external resistor to ground for Slope-Control, or drive high (above 0.75 VDD) for Standby. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 7 | V | 8 | |||
| DC voltage at TXD, RXD, VREF and VS | -0.3 | V | 8 | ||||
| DC voltage at CANH, CANL | -42 | 42 | V | Note 1: Short-circuit applied when TXD is High and Low | 8 | ||
| Transient voltage on pins 6 and 7 | -250 | 250 | V | Note 2: In accordance with ISO-7637 | 8 | ||
| Storage temperature | -55 | 150 | °C | 8 | |||
| Operating ambient temperature | -40 | 125 | °C | 8 | |||
| Virtual junction temperature | TVJ | -40 | 150 | °C | Note 3: In accordance with IEC 60747-1 | 8 | |
| Soldering temperature of leads | 300 | °C | 10 seconds | 8 | |||
| ESD protection on CANH and CANL pins | 6 | kV | Note 4: Classification A: Human Body Model | 8 | |||
| ESD protection on all other pins | 4 | kV | Note 4: Classification A: Human Body Model | 8 | |||
| Supply voltage | VDD | 4.5 | 5.5 | V | Electrical characteristics range | 9 | |
| Ambient temperature, Industrial (I) | TAMB | -40 | 85 | °C | Industrial (I) temperature range | 9 | |
| Supply current, Dominant | IDD | 75 | mA | Dominant; VTXD = 0.8V; VDD | 9 | ||
| Supply current, Recessive | IDD | 10 | mA | Recessive; VTXD = +2V; RS = 47 kΩ | 9 | ||
| Supply current, Standby | IDD | 365 | µA | -40°C ≤ TAMB ≤ +85°C, Standby; (Note 2) | 9 | ||
| High-level of the Power-on Reset comparator | VPORH | 3.8 | 4.3 | V | CANH, CANL outputs are active when VDD > VPORH | 9 | |
| Low-level of the Power-on Reset comparator | VPORL | 3.4 | 4 | V | CANH, CANL outputs are not active when VDD < VPORL | 9 | |
| Hysteresis of Power-on Reset comparator | VPORD | 0.3 | 0.8 | V | Note 1 | 9 | |
| CANH, CANL Recessive bus voltage | VCANH(r); VCANL(r) | 2 | 3 | V | VTXD = VDD; no load. | 9 | |
| Recessive output current (-2V to +7V common mode) | IO(CANH)(reces); IO(CANL)(reces) | -2 | 2 | mA | -2V < V(CAHL,CANH) < +7V, 0V <VDD < 5.5V | 9 | |
| Recessive output current (-5V to +40V common mode) | IO(CANH)(reces); IO(CANL)(reces) | -10 | 10 | mA | -5V < V(CANL,CANH) < +40V, 0V <VDD < 5.5V | 9 | |
| CANH Dominant output voltage | VO(CANH) | 2.75 | 4.5 | V | VTXD = 0.8V | 9 | |
| CANL Dominant output voltage | VO(CANL) | 0.5 | 2.25 | V | VTXD = 0.8V | 9 | |
| Recessive differential output voltage | VDIFF(r)(o) | -500 | 50 | mV | VTXD = 2V; no load | 9 | |
| Dominant differential output voltage | VDIFF(d)(o) | 1.5 | 3 | V | VTXD = 0.8V; VDD = 5V; 40Ω < RL < 60Ω (Note 2) | 9 | |
| CANH short-circuit output current | IO(SC)(CANH) | -200 | mA | VCANH = -5V | 9 | ||
| CANL short-circuit output current | IO(SC)(CANL) | 200 | mA | VCANL = -40V, +40V. (Note 1) | 9 | ||
| Recessive differential input voltage | VDIFF(r)(i) | -1 | 0.5 | V | -2V < V(CANL, CANH) < +7V (Note 3) | 9 | |
| Recessive differential input voltage | VDIFF(r)(i) | -1 | 0.4 | V | -12V < V(CANL, CANH) < +12V (Note 3) | 9 | |
| Dominant differential input voltage | VDIFF(d)(i) | 0.9 | 5 | V | -2V < V(CANL, CANH) < +7V (Note 3) | 10 | |
| Dominant differential input voltage | VDIFF(d)(i) | 1 | 5 | V | -12V < V(CANL, CANH) < +12V (Note 3) | 10 | |
| Differential input hysteresis | VDIFF(h)(i) | 100 | 200 | mV | See Figure 2-3 (Note 1) | 10 | |
| CANH, CANL Common-mode input resistance | RIN | 5 | 50 | kΩ | 10 | ||
| Deviation between CANH and CANL Common-mode input resistance | RIN(d) | -3 | 3 | % | VCANH = VCANL | 10 | |
| Differential input resistance | RDIFF | 20 | 100 | kΩ | TXD = 2V; pins 6 and 7 externally driven | 10 | |
| CANH, CANL input leakage current | ILI | 150 | µA | VDD < VPOR; VCANH = VCANL = +5V | 10 | ||
| High-level input voltage (TXD) | VIH | 2 | V | Output Recessive | 10 | ||
| Low-level input voltage (TXD) | VIL | 0.8 | V | Output Dominant | 10 | ||
| High-level input current (TXD) | IIH | -1 | 1 | µA | VTXD = VDD | 10 | |
| Low-level input current (TXD) | IIL | -400 | -100 | µA | VTXD = 0V | 10 | |
| Low-level output voltage (RXD) | VOL | 0.8 | V | IOL = 8 mA | 10 | ||
| Slope-control mode current | ISLOPE | -200 | -10 | µA | 10 | ||
| Shutdown junction temperature | TJ(sd) | 155 | 180 | °C | Note 1 | 10 | |
| Shutdown temperature hysteresis | TJ(h) | 20 | 30 | °C | -12V < V(CANL, CANH) < +12V (Note 3) | 10 | |
| Bit time | tBIT | 1 | 62.5 | µs | VRS = 0V | 12 | |
| Bit frequency | fBIT | 16 | 1000 | kHz | VRS = 0V | 12 | |
| Delay TXD to bus active | TtxL2bus(d) | 70 | ns | -40°C ≤ TAMB ≤ +125°C, VRS = 0V | 12 | ||
| Delay TXD to bus inactive | TtxH2bus(r) | 125 | ns | -40°C ≤ TAMB ≤ +85°C, VRS = 0V | 12 | ||
| Delay TXD to receive active | TtxL2rx(d) | 130 | ns | -40°C ≤ TAMB ≤ +125°C, VRS = 0V | 12 | ||
| Delay TXD to receive active | TtxL2rx(d) | 250 | ns | -40°C ≤ TAMB ≤ +125°C, RS = 47 kΩ | 12 | ||
| Delay TXD to receiver inactive | TtxH2rx(r) | 175 | ns | -40°C ≤ TAMB ≤ +85°C, VRS = 0V | 12 | ||
| Delay TXD to receiver inactive | TtxH2rx(r) | 225 | ns | -40°C ≤ TAMB ≤ +85°C, RS = 47 kΩ | 12 | ||
| CANH, CANL slew rate | SR | 5.5 | 8.5 | V/µs | Refer to Figure 2-1; RS = 47 kΩ, (Note 1) | 12 | |
| Wake-up time from standby (Rs pin) | tWAKE | 5 | µs | See Figure 2-5 | 12 | ||
| Bus Dominant to RXD Low (Standby mode) | TbusD2rx(s) | 550 | ns | VRS = +4V; (See Figure 2-6) | 12 | ||
| TX Permanent Dominant Timer Disable Time | TtxL2busZ | 1.25 | 4 | ms | 12 | ||
| TX Permanent Dominant Timer Reset Time | TtxR2pdt(res) | 1 | µs | Rising edge on TXD while device is in permanent Dominant state | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package: P = Plastic DIP (300 mil Body) 8-lead SN = Plastic SOIC (150 mil Body) 8-lead | 21 |
CAD (KiCad official)
- Symbol:
MCP2551T-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp2551t-i-etched.step/mcp2551t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp2551t-i.step/mcp2551t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
992a90244d3fd3f0, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).