main
Ray
mcp2551-i-sn: renamed from mcp2551-i, the part it was built from (MCP2551-I/SN); family listed
4fc98b5
MCP2551-I/SN
Microchip Tech · CAN Transceivers · SOIC-8
MCP2551-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | Transmitter Data Input. TTL-compatible input driving the CANH/CANL differential outputs. Has an internal pull-up to VDD (nominal 25 kΩ). Low = Dominant bus state, High = Recessive. |
| 2 | VSS | power_in | Ground supply pin. |
| 3 | VDD | power_in | Positive supply voltage pin (4.5V to 5.5V nominal operating range). |
| 4 | RXD | output | Receiver Data Output. CMOS-compatible output that reflects the differential bus state. Low = Dominant, High = Recessive. Connects to the RX input of the CAN controller. |
| 5 | VREF | output | Reference Voltage Output, defined as VDD/2. Provides a nominal mid-supply reference for CAN controllers that require it. |
| 6 | CANL | bidirectional | CAN Low-Level Voltage I/O. Drives the low side of the CAN differential bus and is internally tied to the receive input comparator. |
| 7 | CANH | bidirectional | CAN High-Level Voltage I/O. Drives the high side of the CAN differential bus and is internally tied to the receive input comparator. |
| 8 | RS | input | Slope-Control / Mode Select Input. Selects High-Speed (RS to VSS), Slope-Control (external resistor REXT to VSS, 10 kΩ-200 kΩ sets slew rate ~4-24 V/µs), or Standby (RS high, > 0.75 VDD) modes. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MCP2551-II/PMCP2551-IE/PMCP2551-II/SNMCP2551-IE/SN
CAD (KiCad official)
- Symbol:
MCP2551-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp2551-i-etched.step/mcp2551-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp2551-i.step/mcp2551-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
992a90244d3fd3f0, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP2551-I/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP2551-I/P
- MCP2551-I/P-TUDI
- MCP2551-I/SN-JSM
# MCP2551-I/SN
**Microchip Tech** · CAN Transceivers · SOIC-8
MCP2551-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXD | input | Transmitter Data Input. TTL-compatible input driving the CANH/CANL differential outputs. Has an internal pull-up to VDD (nominal 25 kΩ). Low = Dominant bus state, High = Recessive. |
| 2 | VSS | power_in | Ground supply pin. |
| 3 | VDD | power_in | Positive supply voltage pin (4.5V to 5.5V nominal operating range). |
| 4 | RXD | output | Receiver Data Output. CMOS-compatible output that reflects the differential bus state. Low = Dominant, High = Recessive. Connects to the RX input of the CAN controller. |
| 5 | VREF | output | Reference Voltage Output, defined as VDD/2. Provides a nominal mid-supply reference for CAN controllers that require it. |
| 6 | CANL | bidirectional | CAN Low-Level Voltage I/O. Drives the low side of the CAN differential bus and is internally tied to the receive input comparator. |
| 7 | CANH | bidirectional | CAN High-Level Voltage I/O. Drives the high side of the CAN differential bus and is internally tied to the receive input comparator. |
| 8 | RS | input | Slope-Control / Mode Select Input. Selects High-Speed (RS to VSS), Slope-Control (external resistor REXT to VSS, 10 kΩ-200 kΩ sets slew rate ~4-24 V/µs), or Standby (RS high, > 0.75 VDD) modes. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `MCP2551-II/P`
- `MCP2551-IE/P`
- `MCP2551-II/SN`
- `MCP2551-IE/SN`
## CAD (KiCad official)
- Symbol: `MCP2551-I`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mcp2551-i-etched.step` / `mcp2551-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp2551-i.step` / `mcp2551-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586182167622275072) (24 pp, sha256 `992a90244d3fd3f0`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp2551-i-datasheet.pdf)
## Other parts in this family
This page is **MCP2551-I/SN**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP2551-I/P
- MCP2551-I/P-TUDI
- MCP2551-I/SN-JSM