component
MCP2517FDT-H
Public Made by Adomby adom
Microchip Tech CAN Controllers, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMCP2517FDT-H
Microchip Tech · CAN Controllers · SOIC-14
MCP2517FDT-H from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TXCAN | output | Transmit output to CAN FD transceiver; configurable as push-pull or open-drain output. |
| 2 | RXCAN | input | Receive input from CAN FD transceiver. |
| 3 | CLKO/SOF | output | Clock output with prescaler (÷1, ÷2, ÷4, ÷10) or Start-of-Frame signal, selectable via IOCON.SOF. |
| 4 | INT | output | Interrupt output (active low) for all enabled interrupt conditions; configurable as push-pull or open-drain. |
| 5 | OSC2 | output | External oscillator output. |
| 6 | OSC1 | input | External oscillator input for 4, 20, or 40 MHz crystal/resonator, or external clock input (2-40 MHz). |
| 7 | VSS | power_in | Ground (0 V reference). |
| 8 | INT1/GPIO1 | bidirectional | RX interrupt output (active low) or general-purpose I/O, configurable via IOCON.PM1; can be push-pull or open-drain. |
| 9 | INT0/GPIO0/XSTBY | bidirectional | TX interrupt output (active low), general-purpose I/O, or transceiver standby control, configurable via IOCON.PM0 and IOCON.XSTBYEN; can be push-pull or open-drain. |
| 10 | SCK | input | SPI clock input, up to 20 MHz; must be ≤ ½ SYSCLK. |
| 11 | SDI | input | SPI serial data input for SFR and RAM access. |
| 12 | SDO | output | SPI serial data output for SFR and RAM access; must have pull-up or pull-down in Sleep mode. |
| 13 | nCS | input | SPI chip select input (active low). |
| 14 | VDD | power_in | Positive supply voltage, 2.7 to 5.5 V; maximum active current 20 mA at 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
MCP2517FDT-H - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mcp2517fdt-h-etched.step/mcp2517fdt-h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp2517fdt-h.step/mcp2517fdt-h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (98 pp, sha256
da37859c5063e535, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).