MCP2200-I

{
  "slug": "mcp2200-i",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech USB ICs, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "mcp2200-i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp2200-i.kicad_sym",
    "mcp2200-i.kicad_mod",
    "mcp2200-i.glb",
    "mcp2200-i.step",
    "mcp2200-i.lbr",
    "docs/hero.png",
    "docs/mcp2200-i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp2200-i-hero.glb",
    "mcp2200-i-hero.overlay.json",
    "mcp2200-i-etched.glb"
  ],
  "component": {
    "mpn": "MCP2200-I",
    "manufacturer": "Microchip Tech",
    "package": "SSOP-20-208mil",
    "pin_count": 20,
    "category": "Interface ICs",
    "subcategory": "USB ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/43688cec525eae07874caef9cb8ea22e.pdf",
    "parts": {
      "symbol": "mcp2200-i.kicad_sym",
      "footprint": "mcp2200-i.kicad_mod",
      "model_3d": "mcp2200-i-hero.glb",
      "model_3d_plain": "mcp2200-i-etched.glb",
      "model_3d_step": "mcp2200-i-etched.step",
      "model_3d_step_plain": "mcp2200-i.step",
      "lbr": "mcp2200-i.lbr"
    },
    "distributor_links": {
      "lcsc": "C220000"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:37:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input with an operating voltage of 3.0V-5.5V; VDD sets the logic-high level of the Rx/Tx and RTS/CTS GPIO pins."
      },
      {
        "number": "2",
        "name": "OSC1",
        "type": "input",
        "description": "Oscillator input; the input clock must be 12 MHz for the USB module."
      },
      {
        "number": "3",
        "name": "OSC2",
        "type": "output",
        "description": "Oscillator output for the 12 MHz quartz crystal or ceramic resonator."
      },
      {
        "number": "4",
        "name": "RST",
        "type": "input",
        "description": "Reset input that must be externally biased; holding it low generates a Reset, and a resistor of 1 kΩ to 10 kΩ to VDD enables the on-chip POR."
      },
      {
        "number": "5",
        "name": "GP7/TxLED",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP7; alternate function is the USB transmit activity LED output (TxLED)."
      },
      {
        "number": "6",
        "name": "GP6/RxLED",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP6; alternate function is the USB receive activity LED output (RxLED)."
      },
      {
        "number": "7",
        "name": "GP5",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP5."
      },
      {
        "number": "8",
        "name": "GP4",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP4."
      },
      {
        "number": "9",
        "name": "GP3",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP3."
      },
      {
        "number": "10",
        "name": "Tx",
        "type": "output",
        "description": "UART TX output of the USART."
      },
      {
        "number": "11",
        "name": "RTS",
        "type": "output",
        "description": "Hardware flow control 'Request to Send' output signal."
      },
      {
        "number": "12",
        "name": "Rx",
        "type": "input",
        "description": "UART RX input of the USART."
      },
      {
        "number": "13",
        "name": "CTS",
        "type": "input",
        "description": "Hardware flow control 'Clear to Send' input signal."
      },
      {
        "number": "14",
        "name": "GP2",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP2."
      },
      {
        "number": "15",
        "name": "GP1/USBCFG",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP1; alternate function is the USB configuration status output (USBCFG), which goes high after the device configures on USB."
      },
      {
        "number": "16",
        "name": "GP0/SSPND",
        "type": "bidirectional",
        "description": "General purpose I/O pin GP0; alternate function is the USB suspend status output (SSPND), which is active-low when USB Suspend is issued by the host."
      },
      {
        "number": "17",
        "name": "VUSB",
        "type": "power_out",
        "description": "USB power pin internally connected to 3.3V that must be locally bypassed with a high-quality ceramic capacitor (0.22 µF to 0.47 µF recommended)."
      },
      {
        "number": "18",
        "name": "D-",
        "type": "bidirectional",
        "description": "USB D- data line."
      },
      {
        "number": "19",
        "name": "D+",
        "type": "bidirectional",
        "description": "USB D+ data line."
      },
      {
        "number": "20",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet states 20-lead SSOP but never gives a 208 mil body width, so the SSOP-20-208mil hint c; The Table 1-1 row for RST is garbled and its SSOP,SOIC column value is missing. Pin 4 is the only SS",
          "1/20 pins cited to the wrong page (name found elsewhere): ['3:OSC2@p3']"
        ],
        "pages_sent": 21,
        "cost_usd": 0.0291,
        "at": "2026-10-28T16:36:51"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/43688cec525eae07874caef9cb8ea22e.pdf",
        "pages": 44,
        "sha256": "7715ea566328c5fe",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp2200-i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          7.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9a01a276d0b4d9561efd58f2fcee56f52c1b6ab464ea7a0380cab4e87a924e6",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp2200-i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          7.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "db45c015917feda3cf617e2939b9d8b693a18d2490c7a972166e62a4b5d25f72",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}