main
Ray
Publish 0.1.0
5365483
MCP1826ST-2502E
Microchip Tech · Power Management Specialized - PMIC · SOT-223-3
MCP1826ST-2502E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated or regulated input voltage supply (2.3V to 6.0V operating range); a 1 µF to 10 µF input capacitor is recommended if the source is distant or a battery. |
| 2 | GND | power_in | Ground pin, connect to a quiet circuit ground; it only conducts the LDO quiescent current (typically 120 µA), so a heavy trace is not required. |
| 3 | VOUT | power_out | Regulated output voltage (fixed 2.5V for this part) requiring a minimum 1.0 µF output capacitor for stability, with up to 1000 mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.3 | 6 | V | Note 1 | 7 | |
| Input Quiescent Current | Iq | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 | |
| Input Quiescent Current for SHDN Mode | ISHDN | 0.1 | 3 | µA | SHDN = GND | 7 | |
| Maximum Output Current | IOUT | 1000 | mA | VIN = 2.3V to 6.0V VR = 0.8V to 5.0V, Note 1 | 7 | ||
| Line Regulation | VOUT/(VOUT x VIN) | -0.2 | 0.05 | 0.2 | %/V | (Note 1) VIN 6V | 7 |
| Load Regulation | VOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 1000 mA, (Note 4) | 7 |
| Output Short Circuit Current | IOUT_SC | 2.2 | A | RLOAD < 0.1, Peak Current | 7 | ||
| Voltage Regulation (relative to VR) | VOUT | -2.5 | 2.5 | % | Note 2 | 7 | |
| Dropout Voltage | VDROPOUT | 250 | 400 | mV | Note 5, IOUT = 1000 mA, VIN(MIN) = 2.3V | 8 | |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1 | 6 | V | TA = +25°C | 8 | |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1.2 | 6 | V | TA = -40°C to +125°C | 8 | |
| PWRGD Threshold Voltage (Referenced to VOUT) | VPWRGD_TH | 90 | 92 | 94 | %VOUT | Falling Edge; VOUT >= 2.5V Fixed | 8 |
| PWRGD Threshold Hysteresis | VPWRGD_HYS | 1 | 2 | 3 | %VOUT | 8 | |
| PWRGD Output Voltage Low | VPWRGD_L | 0.2 | 0.4 | V | IPWRGD SINK = 1.2 mA, ADJ = 0V | 8 | |
| PWRGD Leakage | PWRGD_LK | 1 | nA | VPWRGD = VIN = 6.0V | 8 | ||
| PWRGD Time Delay | TPG | 125 | µs | Rising Edge, RPULLUP = 10 k | 8 | ||
| Detect Threshold to PWRGD Active Time Delay | TVDET-PWRGD | 200 | µs | VOUT = VPWRGD_TH + 20 mV to VPWRGD_TH - 20 mV | 8 | ||
| Logic High Input | VSHDN-HIGH | 45 | %VIN | VIN = 2.3V to 6.0V | 8 | ||
| Logic Low Input | VSHDN-LOW | 15 | %VIN | VIN = 2.3V to 6.0V | 8 | ||
| SHDN Input Leakage Current | SHDNILK | -0.1 | 0.001 | 0.1 | µA | VIN = 6V, SHDN =VIN, SHDN = GND | 8 |
| Output Delay From SHDN | TOR | 100 | µs | SHDN = GND to VIN, VOUT = GND to 95% VR | 8 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 9 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 9 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 9 | ||
| Thermal Resistance, 3L-SOT-223 Junction to Air | JA | 62 | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 9 | ||
| Thermal Resistance, 3L-SOT-223 Junction to Case | JC | 15 | °C/W | 4 Layer Board | 9 |
CAD (KiCad official)
- Symbol:
MCP1826ST-2502E - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1826st-2502e-etched.step/mcp1826st-2502e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1826st-2502e.step/mcp1826st-2502e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (42 pp, sha256
b562c08c2a6def16, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP1826ST-2502E
**Microchip Tech** · Power Management Specialized - PMIC · SOT-223-3
MCP1826ST-2502E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated or regulated input voltage supply (2.3V to 6.0V operating range); a 1 µF to 10 µF input capacitor is recommended if the source is distant or a battery. |
| 2 | GND | power_in | Ground pin, connect to a quiet circuit ground; it only conducts the LDO quiescent current (typically 120 µA), so a heavy trace is not required. |
| 3 | VOUT | power_out | Regulated output voltage (fixed 2.5V for this part) requiring a minimum 1.0 µF output capacitor for stability, with up to 1000 mA output current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.3 | | 6 | V | Note 1 | 7 |
| Input Quiescent Current | Iq | | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 |
| Input Quiescent Current for SHDN Mode | ISHDN | | 0.1 | 3 | µA | SHDN = GND | 7 |
| Maximum Output Current | IOUT | 1000 | | | mA | VIN = 2.3V to 6.0V VR = 0.8V to 5.0V, Note 1 | 7 |
| Line Regulation | VOUT/(VOUT x VIN) | -0.2 | 0.05 | 0.2 | %/V | (Note 1) VIN 6V | 7 |
| Load Regulation | VOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 1000 mA, (Note 4) | 7 |
| Output Short Circuit Current | IOUT_SC | | 2.2 | | A | RLOAD < 0.1, Peak Current | 7 |
| Voltage Regulation (relative to VR) | VOUT | -2.5 | | 2.5 | % | Note 2 | 7 |
| Dropout Voltage | VDROPOUT | | 250 | 400 | mV | Note 5, IOUT = 1000 mA, VIN(MIN) = 2.3V | 8 |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1 | | 6 | V | TA = +25°C | 8 |
| PWRGD Input Voltage Operating Range | VPWRGD_VIN | 1.2 | | 6 | V | TA = -40°C to +125°C | 8 |
| PWRGD Threshold Voltage (Referenced to VOUT) | VPWRGD_TH | 90 | 92 | 94 | %VOUT | Falling Edge; VOUT >= 2.5V Fixed | 8 |
| PWRGD Threshold Hysteresis | VPWRGD_HYS | 1 | 2 | 3 | %VOUT | | 8 |
| PWRGD Output Voltage Low | VPWRGD_L | | 0.2 | 0.4 | V | IPWRGD SINK = 1.2 mA, ADJ = 0V | 8 |
| PWRGD Leakage | PWRGD_LK | | 1 | | nA | VPWRGD = VIN = 6.0V | 8 |
| PWRGD Time Delay | TPG | | 125 | | µs | Rising Edge, RPULLUP = 10 k | 8 |
| Detect Threshold to PWRGD Active Time Delay | TVDET-PWRGD | | 200 | | µs | VOUT = VPWRGD_TH + 20 mV to VPWRGD_TH - 20 mV | 8 |
| Logic High Input | VSHDN-HIGH | 45 | | | %VIN | VIN = 2.3V to 6.0V | 8 |
| Logic Low Input | VSHDN-LOW | | | 15 | %VIN | VIN = 2.3V to 6.0V | 8 |
| SHDN Input Leakage Current | SHDNILK | -0.1 | 0.001 | 0.1 | µA | VIN = 6V, SHDN =VIN, SHDN = GND | 8 |
| Output Delay From SHDN | TOR | | 100 | | µs | SHDN = GND to VIN, VOUT = GND to 95% VR | 8 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | Steady State | 9 |
| Maximum Junction Temperature | TJ | | | 150 | °C | Transient | 9 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 9 |
| Thermal Resistance, 3L-SOT-223 Junction to Air | JA | | 62 | | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 9 |
| Thermal Resistance, 3L-SOT-223 Junction to Case | JC | | 15 | | °C/W | 4 Layer Board | 9 |
## CAD (KiCad official)
- Symbol: `MCP1826ST-2502E`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files: `mcp1826st-2502e-etched.step` / `mcp1826st-2502e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1826st-2502e.step` / `mcp1826st-2502e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp1826st-2502e-datasheet.pdf) (42 pp, sha256 `b562c08c2a6def16`, retrieved 2026-11-09, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1826st-2502e-datasheet.pdf)