component
MCP1826S-2502E
Public Made by Adomby adom
Microchip Tech Power Management Specialized - PMIC, SOT-223-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MCP1826S-2502E
Microchip Tech · Power Management Specialized - PMIC · SOT-223-3
MCP1826S-2502E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage supply; connect the unregulated or regulated source here, with a 1 µF to 10 µF input capacitor typically sufficient if the source is far away or a battery. |
| 2 | GND | power_in | Ground; connect to a quiet circuit ground, it only conducts the LDO quiescent current (typically 120 µA) so a heavy trace is not required. |
| 3 | VOUT | power_out | Regulated output voltage of the LDO; a minimum output capacitance of 1.0 µF is required for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.3 | 6 | V | Note 1 | 7 | |
| Input Quiescent Current | Iq | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 | |
| Maximum Output Current | IOUT | 1000 | mA | VIN = 2.3V to 6.0V, VR = 0.8V to 5.0V, Note 1 | 7 | ||
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.2 | 0.05 | 0.2 | %/V | Note 1, VIN ≤ 6V (typ ±0.05, max ±0.20) | 7 |
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 1000 mA, Note 4 (typ ±0.5) | 7 |
| Output Voltage Regulation | VOUT | -2.5 | 2.5 | V | VR - 2.5% to VR + 2.5%, typ VR ±0.5%, Note 2; VR = 2.5V | 7 | |
| Dropout Voltage | VDROPOUT | 250 | 400 | mV | Note 5, IOUT = 1000 mA, VIN(MIN) = 2.3V | 8 | |
| Output Short Circuit Current | IOUT_SC | 2.2 | A | RLOAD < 0.1, Peak Current | 7 | ||
| Output Noise | eN | 2 | µV/√Hz | IOUT = 200 mA, f = 1 kHz, COUT = 10 µF (X7R Ceramic), VOUT = 2.5V | 8 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 60 | dB | f = 100 Hz, COUT = 4.7 µF, IOUT = 100 µA, VINAC = 100 mV pk-pk, CIN = 0 µF | 9 | ||
| Thermal Shutdown Temperature | TSD | 150 | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 9 | ||
| Thermal Shutdown Hysteresis | TSD | 10 | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 9 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 9 | |
| Maximum Junction Temperature (transient) | TJ | 150 | °C | Transient | 9 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 9 | ||
| Maximum Voltage on Any Pin | -0.3 | 0.3 | V | (GND, 0.3V) to (VDD + 0.3)V; max is VDD + 0.3 | 7 | ||
| Storage Temperature | -65 | 150 | °C | 7 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 7 | |||
| ESD protection HBM | 4 | kV | all pins, HBM | 7 | |||
| ESD protection MM | 300 | V | all pins, MM | 7 | |||
| Thermal Resistance Junction-to-Ambient, 3L-SOT-223 | θJA | 62 | °C/W | EIA/JEDEC JESD51-751-7 4 Layer Board | 9 | ||
| Thermal Resistance Junction-to-Case, 3L-SOT-223 | θJC | 15 | °C/W | EIA/JEDEC JESD51-751-7 4 Layer Board | 9 | ||
| Output Capacitor (stability) | COUT | 1 | 22 | µF | Minimum required for stability; maximum 22 µF recommended | 17 |
CAD (KiCad official)
- Symbol:
MCP1826S-2502E - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1826s-2502e-etched.step/mcp1826s-2502e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1826s-2502e.step/mcp1826s-2502e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (42 pp, sha256
b562c08c2a6def16, retrieved 2026-10-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP1826S-2502E
**Microchip Tech** · Power Management Specialized - PMIC · SOT-223-3
MCP1826S-2502E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage supply; connect the unregulated or regulated source here, with a 1 µF to 10 µF input capacitor typically sufficient if the source is far away or a battery. |
| 2 | GND | power_in | Ground; connect to a quiet circuit ground, it only conducts the LDO quiescent current (typically 120 µA) so a heavy trace is not required. |
| 3 | VOUT | power_out | Regulated output voltage of the LDO; a minimum output capacitance of 1.0 µF is required for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.3 | | 6 | V | Note 1 | 7 |
| Input Quiescent Current | Iq | | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 |
| Maximum Output Current | IOUT | 1000 | | | mA | VIN = 2.3V to 6.0V, VR = 0.8V to 5.0V, Note 1 | 7 |
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.2 | 0.05 | 0.2 | %/V | Note 1, VIN ≤ 6V (typ ±0.05, max ±0.20) | 7 |
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 1000 mA, Note 4 (typ ±0.5) | 7 |
| Output Voltage Regulation | VOUT | -2.5 | | 2.5 | V | VR - 2.5% to VR + 2.5%, typ VR ±0.5%, Note 2; VR = 2.5V | 7 |
| Dropout Voltage | VDROPOUT | | 250 | 400 | mV | Note 5, IOUT = 1000 mA, VIN(MIN) = 2.3V | 8 |
| Output Short Circuit Current | IOUT_SC | | 2.2 | | A | RLOAD < 0.1, Peak Current | 7 |
| Output Noise | eN | | 2 | | µV/√Hz | IOUT = 200 mA, f = 1 kHz, COUT = 10 µF (X7R Ceramic), VOUT = 2.5V | 8 |
| Power Supply Ripple Rejection Ratio | PSRR | | 60 | | dB | f = 100 Hz, COUT = 4.7 µF, IOUT = 100 µA, VINAC = 100 mV pk-pk, CIN = 0 µF | 9 |
| Thermal Shutdown Temperature | TSD | | 150 | | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 9 |
| Thermal Shutdown Hysteresis | TSD | | 10 | | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 9 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | Steady State | 9 |
| Maximum Junction Temperature (transient) | TJ | | | 150 | °C | Transient | 9 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 9 |
| Maximum Voltage on Any Pin | | -0.3 | | 0.3 | V | (GND, 0.3V) to (VDD + 0.3)V; max is VDD + 0.3 | 7 |
| Storage Temperature | | -65 | | 150 | °C | | 7 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 7 |
| ESD protection HBM | | | | 4 | kV | all pins, HBM | 7 |
| ESD protection MM | | | | 300 | V | all pins, MM | 7 |
| Thermal Resistance Junction-to-Ambient, 3L-SOT-223 | θJA | | 62 | | °C/W | EIA/JEDEC JESD51-751-7 4 Layer Board | 9 |
| Thermal Resistance Junction-to-Case, 3L-SOT-223 | θJC | | 15 | | °C/W | EIA/JEDEC JESD51-751-7 4 Layer Board | 9 |
| Output Capacitor (stability) | COUT | 1 | | 22 | µF | Minimum required for stability; maximum 22 µF recommended | 17 |
## CAD (KiCad official)
- Symbol: `MCP1826S-2502E`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files: `mcp1826s-2502e-etched.step` / `mcp1826s-2502e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1826s-2502e.step` / `mcp1826s-2502e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp1826s-2502e-datasheet.pdf) (42 pp, sha256 `b562c08c2a6def16`, retrieved 2026-10-24, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1826s-2502e-datasheet.pdf)