Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1825T-1202E

Microchip Tech · Power Management Specialized - PMIC · SOT-223-3

MCP1825T-1202E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage supply connected to the unregulated or regulated source; a 1 µF to 10 µF input capacitor is typically sufficient.
2 GND power_in Ground pin of the LDO, connected to a quiet circuit ground; it only conducts the quiescent current (typically 120 µA).
3 VOUT power_out Regulated output voltage of the LDO, requiring a minimum output capacitance of 1.0 µF for stability.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-223-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.1 6 V Note 1 7
Input Quiescent Current Iq 120 220 µA IL = 0 mA, VOUT = 0.8V to 5.0V 7
Input Quiescent Current for SHDN Mode ISHDN 0.1 3 µA SHDN = GND 7
Maximum Output Current IOUT 500 mA VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, Note 1 7
Line Regulation VOUT/(VOUT x VIN) -0.16 0.05 0.16 %/V (Note 1) VIN 6V 7
Load Regulation VOUT/VOUT -1 0.5 1 % IOUT = 1 mA to 500 mA, (Note 4) 7
Output Short Circuit Current IOUT_SC 1.2 A RLOAD < 0.1, Peak Current 7
Voltage Regulation VOUT -2.5 0.5 2.5 % Note 2 8
Dropout Voltage VDROPOUT 210 350 mV Note 5, IOUT = 500 mA, VIN(MIN) = 2.1V 8
PWRGD Input Voltage Operating Range VPWRGD_VIN 1 6 V TA = +25°C 8
PWRGD Input Voltage Operating Range VPWRGD_VIN 1.2 6 V TA = -40°C to +125°C 8
PWRGD Threshold Voltage (Referenced to VOUT), falling edge VPWRGD_TH 89 92 95 %VOUT VOUT < 2.5V Fixed, VOUT = Adj. 8
PWRGD Threshold Hysteresis VPWRGD_HYS 1 2 3 %VOUT 8
PWRGD Output Voltage Low VPWRGD_L 0.2 0.4 V IPWRGD SINK = 1.2 mA, ADJ = 0V 8
PWRGD Leakage PWRGD_LK 1 nA VPWRGD = VIN = 6.0V 8
PWRGD Time Delay TPG 110 µs Rising Edge, RPULLUP = 10 k 8
Detect Threshold to PWRGD Active Time Delay TVDET-PWRGD 200 µs VOUT = VPWRGD_TH + 20 mV to VPWRGD_TH, 20 mV 8
Operating Junction Temperature Range TJ -40 125 °C Steady State 10
Maximum Junction Temperature TJ 150 °C Transient 10
Storage Temperature Range TA -65 150 °C 10
Thermal Resistance, 3LD SOT-223, junction to ambient JA 62 °C/W EIA/JEDEC JESD51-751-7, 4 Layer Board 10
Thermal Resistance, 3LD SOT-223, junction to case JC 15 °C/W EIA/JEDEC JESD51-751-7, 4 Layer Board 10

CAD (KiCad official)

  • Symbol: MCP1825T-1202E
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1825t-1202e-etched.step / mcp1825t-1202e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1825t-1202e.step / mcp1825t-1202e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (44 pp, sha256 5833783bb79e68e4, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF