component
MCP1825S-3302E
Public Made by Adomby adom
Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1825S-3302E
Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-3
MCP1825S-3302E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Connect the unregulated or regulated input voltage source to VIN, with an input capacitor of 1 µF to 10 µF recommended for most applications. |
| 2 | GND | power_in | Connect GND to a quiet circuit ground, since it conducts only the quiescent current (typically 120 µA) and should be tied to the output capacitor return in noisy or switching-input applications. |
| 3 | VOUT | power_out | Regulated output voltage of the LDO, which requires a minimum output capacitance of 1.0 µF for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.1 | 6 | V | Note 1 | 7 | |
| Input Quiescent Current | Iq | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 | |
| Maximum Output Current | IOUT | 500 | mA | VIN = 2.1V to 6.0V; VR = 0.8V to 5.0V, Note 1 | 7 | ||
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.16 | 0.05 | 0.16 | %/V | (Note 1) ≤ VIN ≤ 6V | 7 |
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 500 mA, (Note 4) | 7 |
| Voltage Regulation (fixed output, % of VR) | VOUT | -2.5 | 0.5 | 2.5 | % | Percent of VR (3.3V nominal for this part), Note 2 | 7 |
| Dropout Voltage | VDROPOUT | 210 | 350 | mV | Note 5, IOUT = 500 mA, VIN(MIN) = 2.1V | 8 | |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 10 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 10 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| ESD protection, HBM | 4 | kV | All pins (HBM/MM) | 7 | |||
| ESD protection, MM | 300 | V | All pins (HBM/MM) | 7 | |||
| Output capacitance (ceramic, stable range) | 1 | 22 | µF | Minimum for stability; maximum recommended | 17 | ||
| Output capacitor ESR (electrolytic) | ESR | 1 | ohm | Electrolytic output capacitor, no greater than | 17 | ||
| Input capacitance | 1 | 4.7 | µF | Recommended for most applications | 18 | ||
| Thermal Resistance, 3LD SOT-223, junction to ambient | θJA | 62 | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 10 | ||
| Thermal Resistance, 3LD SOT-223, junction to case | θJC | 15 | °C/W | 10 |
CAD (KiCad official)
- Symbol:
MCP1825S-3302E - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1825s-3302e-etched.step/mcp1825s-3302e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1825s-3302e.step/mcp1825s-3302e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (38 pp, sha256
078c84d2df9d4861, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).