Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
MCP1824ST-1802E
Microchip Tech · Power Management Specialized - PMIC · SOT-223-3
MCP1824ST-1802E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated or regulated input voltage supply (2.1V to 6.0V operating range); a 1 µF to 10 µF input capacitor is typically sufficient. |
| 2 | GND | power_in | Ground; tie to an electrically quiet circuit ground (or the output capacitor return) for best noise and PSRR performance. |
| 3 | VOUT | power_out | Regulated output voltage (1.8V fixed for this part); requires a minimum of 1.0 µF output capacitance for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.1 | 6 | V | 7 | ||
| Input Quiescent Current | Iq | 120 | 220 | µA | IL = 0 mA, VOUT = 0.8V to 5.0V | 7 | |
| Maximum Continuous Output Current | IOUT | 300 | mA | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V | 7 | ||
| Line Regulation | ΔVOUT/(VOUT x ΔVIN) | -0.17 | 0.05 | 0.17 | %/V | (Note 1) ≤ VIN ≤ 6V | 7 |
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT = 1 mA to 300 mA, (Note 4) | 7 |
| Dropout Voltage | VDROPOUT | 200 | 320 | mV | Note 5, IOUT = 300 mA, VIN(MIN) = 2.1V | 7 | |
| Fixed Output Voltage Regulation | VOUT | -2.5 | 0.5 | 2.5 | % | VR - 2.5% to VR + 2.5%, typ VR ±0.5%, Note 2 | 8 |
| Maximum Pulsed Output Duty Cycle | IPULSE_DUTY | 60 | % | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA, Period < 10 ms | 8 | ||
| Maximum Pulsed Output Period | IPULSE_PERIOD | 10 | ms | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, IOUT = 500 mA | 8 | ||
| Maximum Voltage on Any Pin (lower limit) | -0.3 | V | (GND, 0.3V) to (VIN + 0.3)V; min is the offset relative to GND, upper limit is VIN + 0.3 V | 7 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 7 | |||
| Storage Temperature | -65 | 150 | °C | 7 | |||
| Operating Junction Temperature | TJ | -40 | 125 | °C | Steady State | 10 | |
| ESD protection HBM | 4 | kV | all pins, HBM | 7 | |||
| ESD protection MM | 300 | V | all pins, MM | 7 | |||
| Thermal Resistance, Junction to Ambient, 3LD SOT-223 | θJA | 62 | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 10 | ||
| Thermal Resistance, Junction to Case, 3LD SOT-223 | θJC | 15 | °C/W | EIA/JEDEC JESD51-751-7, 4 Layer Board | 10 | ||
| Output Short Circuit Current | IOUT_SC | 720 | mA | RLOAD < 0.1Ω, Peak Current | 7 | ||
| Maximum Pulsed Output Current | IPULSE | 500 | mA | VIN = 2.1V to 6.0V, VR = 0.8V to 5.0V, Duty Cycle ≤ 60%, Period < 10 ms | 7 | ||
| Output Noise | eN | 2 | µV/√Hz | IOUT = 200 mA, f = 1 kHz, COUT = 10 µF (X7R Ceramic), VOUT = 2.5V | 9 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 55 | dB | f = 100 Hz, IOUT = 10 mA, VINAC = 200 mV pk-pk, CIN = 0 µF | 9 | ||
| Thermal Shutdown Temperature | TSD | 150 | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 9 | ||
| Thermal Shutdown Hysteresis | ΔTSD | 10 | °C | IOUT = 100 µA, VOUT = 1.8V, VIN = 2.8V | 9 |
CAD (KiCad official)
- Symbol:
MCP1824ST-1802E - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1824st-1802e-etched.step/mcp1824st-1802e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1824st-1802e.step/mcp1824st-1802e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (34 pp, sha256
dda3986a6bed8be8, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).