main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp1804t-3002i: viewers · Ray
mcp1804t-3002i-etched.glb Publish 0.1.0 · Ray
mcp1804t-3002i-etched.step mcp1804t-3002i: factory component page (tier=mfr) · Ray
mcp1804t-3002i-hero.glb mcp1804t-3002i: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1804t-3002i-hero.overlay.json Publish 0.1.0 · Ray
mcp1804t-3002i.glb Publish 0.1.0 · Ray
mcp1804t-3002i.kicad_mod Publish 0.1.0 · Ray
mcp1804t-3002i.kicad_sym Publish 0.1.0 · Ray
mcp1804t-3002i.lbr Publish 0.1.0 · Ray
mcp1804t-3002i.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

MCP1804T-3002I

Microchip Tech · Power Management Specialized - PMIC · SOT-23-5

MCP1804T-3002I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply voltage, with an input operating range of 2.0V to 28.0V and 0.1 µF to 1.0 µF of capacitance recommended for stable operation.
2 GND power_in Regulator ground that the output regulation is referenced to, carrying only the LDO bias current of 50 to 60 µA typical.
3 NC unconnected No internal connection; the pin is a true no-connect pin.
4 SHDN input Shutdown input that enables the output at logic-high and disables it at logic-low, with no internal pull-up or pull-down so it must be tied to VIN or GND.
5 VOUT power_out Regulated output voltage, which requires 0.1 µF to 1.0 µF of ceramic, tantalum or aluminum electrolytic capacitance for stable operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2 28 V Note 1 3
Input Quiescent Current IQ 50 105 µA IL = 0 mA; 1.8V VOUT 5.0V 3
Shutdown Current ISHDN 0.01 0.1 µA SHDN = 0V 3
Maximum Output Current IOUT 150 mA VIN = VR + 3.0V; VOUT 3.0V 3
Output Voltage Regulation (tolerance) VOUT -2 2 % IOUT = 10 mA, Note 2 3
VOUT Temperature Coefficient TCVOUT -100 100 ppm/°C IOUT = 20 mA, -40°C TA 85°C, Note 3 3
Line Regulation VOUT/(VOUT x VIN) 0.05 0.1 %/V IOUT = 5 mA 4
Line Regulation VOUT/(VOUT x VIN) 0.15 0.3 %/V IOUT = 13 mA 4
Load Regulation VOUT/VOUT 50 90 mV IL = 1.0 mA to 50 mA, Note 4; 1.8V VOUT 5.0V 4
Dropout Voltage VDROPOUT 260 360 mV IL = 20 mA; 3.0V VR 3.9V 4
Dropout Voltage VDROPOUT 1300 1700 mV IL = 100 mA; 3.0V VR 3.9V 4
SHDN H Voltage VSHDN_H 1.1 V VIN = 28V 4
SHDN L Voltage VSHDN_L 0 0.35 V VIN = 28V 4
SHDN Current ISHDN -0.1 0.1 µA VIN = 28V, VSHDN = GND or VIN 4
Maximum Input Voltage VIN 30 V 3
SHDN Voltage VSHDN 30 V 3
Output Current (Peak) IOUT 300 mA 3
Operating Temperature Range TA -40 85 °C 5
Operating Junction Temperature Range TJ -40 125 °C 5
Storage Temperature Range TA -55 125 °C 5
Current Limiter ILIMIT 200 mA 3
Output Short Circuit Current IOUT_SC 40 mA 3
Power Supply Ripple Rejection Ratio PSRR 50 dB f = 1 kHz, IL = 20 mA, VIN_AC = 0.5V pk-pk, CIN = 0 µF 5
Thermal Shutdown Protection TSD 150 °C TJ = 150°C 5
Thermal Shutdown Hysteresis TSD 25 °C 5
Thermal Resistance, 5LD SOT-23 (junction to ambient) JA 256 °C/W EIA/JEDEC JESD51-7, FR-4 0.063 4-Layer Board 5
Thermal Resistance, 5LD SOT-23 (junction to case) JC 81 °C/W EIA/JEDEC JESD51-7, FR-4 0.063 4-Layer Board 5

CAD (KiCad official)

  • Symbol: MCP1804T-3002I
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp1804t-3002i-etched.step / mcp1804t-3002i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1804t-3002i.step / mcp1804t-3002i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (36 pp, sha256 f28199ed78f23549, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF