main
Ray
Publish 0.1.0
c8c0d29
MCP1802T-3002I
Microchip Tech · Power Management Specialized - PMIC · SOT-23-5
MCP1802T-3002I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Connect VIN to the unregulated input source; for most applications 0.1 µF of capacitance ensures stable LDO operation. |
| 2 | GND | power_in | Regulator ground that the output regulation is referenced to; only the 25 µA typical bias current flows out of this pin. |
| 3 | SHDN | input | Shutdown input: logic-high enables the LDO output and logic-low disables it, and the pin has no internal pull-up or pull-down so it must be connected to VIN or GND. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output voltage that connects to the load and output capacitor, carrying the full DC load current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2 | 10 | V | Note 1 | 3 | |
| Input Quiescent Current | Iq | 25 | 50 | µA | IL = 0 mA | 3 | |
| Shutdown Current | ISHDN | 0.01 | 0.1 | µA | SHDN = 0V | 3 | |
| Maximum Output Current | IOUT_mA | 300 | mA | VR >= 2V, VIN = VR +1.0V | 3 | ||
| Output Voltage Regulation (tolerance about VR) | VOUT | -2 | 2 | % | VR >= 1.45V, IOUT = 30 mA, Note 2 | 3 | |
| Line Regulation | VOUT/(VOUTxVIN) | -0.2 | 0.01 | 0.2 | %/V | (VR + 1V) <= VIN <= 10V, Note 1 | 3 |
| Load Regulation | VOUT/VOUT | 50 | 100 | mV | IL = 1.0 mA to 300 mA | 3 | |
| Dropout Voltage (2.0V <= VR <= 3.1V) | VDROPOUT | 80 | 120 | mV | IL = 30 mA, 2.0V <= VR <= 3.1V | 3 | |
| Dropout Voltage (2.0V <= VR < 3.1V) | VDROPOUT | 240 | 350 | mV | IL = 100 mA, 2.0V <= VR < 3.1V | 3 | |
| Shutdown Input Logic High | VSHDN-HIGH | 1.6 | V | 4 | |||
| Shutdown Input Logic Low | VSHDN-LOW | 0.25 | V | 4 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Storage Temperature Range | Tstg | -55 | 125 | °C | 4 | ||
| Input Voltage | VIN | 12 | V | 3 | |||
| Output Current (Peak) | IOUT | 500 | mA | 3 | |||
| Continuous Power Dissipation, 5-Pin SOT-23-5 | PD | 250 | mW | 3 | |||
| Thermal Resistance, Junction to Ambient, SOT-23-5 | JA | 256 | °C/W | EIA/JEDEC JESD51-7, FR-4 0.063 4-Layer Board | 4 | ||
| Thermal Resistance, Junction to Case, SOT-23-5 | JC | 81 | °C/W | EIA/JEDEC JESD51-7, FR-4 0.063 4-Layer Board | 4 | ||
| VOUT Temperature Coefficient | TCVOUT | 100 | ppm/°C | IOUT = 30 mA, -40°C <= TA <= +85°C, Note 3 | 3 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 70 | dB | f = 10 kHz, IL = 50 mA, VINAC = 1V pk-pk, CIN = 0 µF | 3 |
CAD (KiCad official)
- Symbol:
MCP1802T-3002I - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp1802t-3002i-etched.step/mcp1802t-3002i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1802t-3002i.step/mcp1802t-3002i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
6280a5f4e969cb68, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP1802T-3002I
**Microchip Tech** · Power Management Specialized - PMIC · SOT-23-5
MCP1802T-3002I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Connect VIN to the unregulated input source; for most applications 0.1 µF of capacitance ensures stable LDO operation. |
| 2 | GND | power_in | Regulator ground that the output regulation is referenced to; only the 25 µA typical bias current flows out of this pin. |
| 3 | SHDN | input | Shutdown input: logic-high enables the LDO output and logic-low disables it, and the pin has no internal pull-up or pull-down so it must be connected to VIN or GND. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output voltage that connects to the load and output capacitor, carrying the full DC load current. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2 | | 10 | V | Note 1 | 3 |
| Input Quiescent Current | Iq | | 25 | 50 | µA | IL = 0 mA | 3 |
| Shutdown Current | ISHDN | | 0.01 | 0.1 | µA | SHDN = 0V | 3 |
| Maximum Output Current | IOUT_mA | 300 | | | mA | VR >= 2V, VIN = VR +1.0V | 3 |
| Output Voltage Regulation (tolerance about VR) | VOUT | -2 | | 2 | % | VR >= 1.45V, IOUT = 30 mA, Note 2 | 3 |
| Line Regulation | VOUT/(VOUTxVIN) | -0.2 | 0.01 | 0.2 | %/V | (VR + 1V) <= VIN <= 10V, Note 1 | 3 |
| Load Regulation | VOUT/VOUT | | 50 | 100 | mV | IL = 1.0 mA to 300 mA | 3 |
| Dropout Voltage (2.0V <= VR <= 3.1V) | VDROPOUT | | 80 | 120 | mV | IL = 30 mA, 2.0V <= VR <= 3.1V | 3 |
| Dropout Voltage (2.0V <= VR < 3.1V) | VDROPOUT | | 240 | 350 | mV | IL = 100 mA, 2.0V <= VR < 3.1V | 3 |
| Shutdown Input Logic High | VSHDN-HIGH | 1.6 | | | V | | 4 |
| Shutdown Input Logic Low | VSHDN-LOW | | | 0.25 | V | | 4 |
| Operating Temperature Range | TA | -40 | | 85 | °C | | 4 |
| Storage Temperature Range | Tstg | -55 | | 125 | °C | | 4 |
| Input Voltage | VIN | | | 12 | V | | 3 |
| Output Current (Peak) | IOUT | | | 500 | mA | | 3 |
| Continuous Power Dissipation, 5-Pin SOT-23-5 | PD | | | 250 | mW | | 3 |
| Thermal Resistance, Junction to Ambient, SOT-23-5 | JA | | 256 | | °C/W | EIA/JEDEC JESD51-7, FR-4 0.063 4-Layer Board | 4 |
| Thermal Resistance, Junction to Case, SOT-23-5 | JC | | 81 | | °C/W | EIA/JEDEC JESD51-7, FR-4 0.063 4-Layer Board | 4 |
| VOUT Temperature Coefficient | TCVOUT | | 100 | | ppm/°C | IOUT = 30 mA, -40°C <= TA <= +85°C, Note 3 | 3 |
| Power Supply Ripple Rejection Ratio | PSRR | | 70 | | dB | f = 10 kHz, IL = 50 mA, VINAC = 1V pk-pk, CIN = 0 µF | 3 |
## CAD (KiCad official)
- Symbol: `MCP1802T-3002I`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mcp1802t-3002i-etched.step` / `mcp1802t-3002i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1802t-3002i.step` / `mcp1802t-3002i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp1802t-3002i-datasheet.pdf) (28 pp, sha256 `6280a5f4e969cb68`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1802t-3002i-datasheet.pdf)