Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
MCP1792-3302H
Microchip Tech · Power Management Specialized - PMIC · SOT-223-4
MCP1792-3302H from Microchip Tech, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage supply, operating range 4.5V to 55V (up to 70V transient); a 2.2 µF to 10 µF ceramic input capacitor is recommended. |
| 2 | GND | power_in | Ground pin, conducts only ground current and should be tied to a quiet circuit ground for best PSRR and noise performance. |
| 3 | VOUT | power_out | Regulated output voltage VR (3.3V for the -3302H option), requires a minimum 2.2 µF ceramic output capacitor for stability. |
| 4 | Tab | power_in | Exposed thermal pad, connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-223-4 |
| Category | Power Supply Chip |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 4.5 | 55 | V | 3 | ||
| Output Voltage Tolerance | VOUT | -2 | 2 | % | TA of -40°C to +85°C | 3 | |
| Output Voltage Tolerance | VOUT | -3 | 3 | % | TA of -40°C to +150°C | 3 | |
| Input Quiescent Current | IQ | 25 | 45 | µA | IOUT = 0A | 3 | |
| Input Quiescent Current for SHDN Mode | ISHDN | 2 | 12 | µA | SHDN = GND, VIN = 55V | 3 | |
| Ground Current | IGND | 100 | 150 | µA | IOUT = 100 mA | 3 | |
| Maximum Continuous Output Current | IOUT | 100 | mA | (Note 2) | 3 | ||
| Foldback Current Corner | IOUT_SC | 230 | 370 | mA | VIN ≤ 55V | 3 | |
| Line Regulation | VOUT/(VOUT×VIN) | -0.05 | 0.0002 | 0.05 | %/V | 4.5V < VIN < 55V, 6.2V < VIN < 55V | 4 |
| Load Regulation | VOUT/VOUT | -1 | 0.2 | 1 | % | IOUT = 1 mA to 100 mA, TA of -40°C to +85°C | 4 |
| Load Regulation | VOUT/VOUT | -2 | 0.2 | 2 | % | IOUT = 1 mA to 100 mA, TA of -40°C to +150°C | 4 |
| Dropout Voltage | VDROPOUT | 250 | 400 | mV | TA of -40°C to +85°C, IOUT = 100 mA | 4 | |
| Dropout Voltage | VDROPOUT | 250 | 1200 | mV | TA of -40°C to +150°C, IOUT = 100 mA (Note 3) | 4 | |
| Shutdown Input Logic High | VSHDN-HIGH | 2.4 | V | 4 | |||
| Shutdown Input Logic Low | VSHDN-LOW | 0 | 0.8 | V | 4 | ||
| Shutdown Input Leakage Current | SHDNILK | 0.2 | 0.4 | µA | SHDN = GND, or SHDN = 6.2V | 4 | |
| Output Voltage Delay Time | TDELAY | 800 | 1200 | µs | VIN = 0 to 6.2V, VOUT = GND to 10% of VR, RLOAD = 50 | 4 | |
| Thermal Shutdown | TSD | 175 | 181 | °C | Rising Temperature | 5 | |
| Storage Temperature | -55 | 175 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 175 | °C | 3 | |||
| Operating Junction Temperature | TJ | -40 | 150 | °C | 3 | ||
| Input Voltage | 70 | V | 3 | ||||
| Maximum Voltage on VOUT | 5.5 | V | 3 | ||||
| ESD HBM | 2 | kV | 3 | ||||
| ESD CDM | 750 | V | 3 | ||||
| ESD MM | 200 | V | 3 | ||||
| Thermal Resistance Junction to Air, SOT-223-3LD | θJA | 70 | °C/W | JEDEC standard 4-layer FR4 board with 1 oz. copper | 5 | ||
| Thermal Resistance Junction to Case, SOT-223-3LD | θJC | 60 | °C/W | 5 | |||
| Output Voltage Nominal (3.3V version) | VR | 3.3 | V | 3 |
CAD (KiCad official)
- Symbol:
MCP1792-3302H - Footprint:
Package_TO_SOT_SMD:SOT-223 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
mcp1792-3302h-etched.step/mcp1792-3302h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1792-3302h.step/mcp1792-3302h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (34 pp, sha256
98464c4589491b9b, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).