3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1711T-12I
Microchip Tech · Power Management Specialized - PMIC · SOT-23-5
MCP1711T-12I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply voltage, 1.4V to 6.0V operating range (6.5V absolute maximum); a 0.1 µF to 1.0 µF input capacitor is recommended close to the pin. |
| 2 | GND | power_in | Regulator ground terminal that carries only the LDO bias current and is the reference for output regulation; tie to the negative side of the input and output capacitors. |
| 3 | SHDN | input | Shutdown input where logic high enables the output and logic low disables it and discharges VOUT through the internal discharge resistance; do not leave floating, as the output becomes unstable. |
| 4 | NC | unconnected | Not connected internally on the SOT-23 package; leave floating or tie to the ground plane. |
| 5 | VOUT | power_out | Regulated fixed voltage output (1.2V for the -12I option) delivering up to 150 mA; connect to the load and the optional output capacitor (0.1 µF to 1.0 µF recommended) placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.4 | 6 | V | IOUT = 1 µA | 3 | |
| Output Voltage (VR = 1.2V) | VOUT | 1.18 | 1.2 | 1.22 | V | VR < 2.0V | 4 |
| Maximum Output Current | IOUT | 150 | mA | 3 | |||
| Load Regulation | ΔVOUT | -16 | 3 | 16 | mV | 1 µA ≤ IOUT ≤ 1 mA | 3 |
| Load Regulation | ΔVOUT | -50 | 17 | 50 | mV | 1 mA ≤ IOUT ≤ 150 mA | 3 |
| Dropout Voltage 1 | VDROPOUT1 | 0.87 | 1.23 | V | IOUT = 50 mA | 4 | |
| Dropout Voltage 2 | VDROPOUT2 | 1.41 | 1.93 | V | IOUT = 150 mA | 4 | |
| Input Quiescent Current | Iq | 0.6 | 1.27 | µA | VR < 1.9V | 3 | |
| Input Quiescent Current for SHDN mode | ISHDN | 0.01 | 0.1 | µA | VIN = 6.0V, VSHDN = VIN | 3 | |
| Line Regulation | ΔVOUT/(ΔVIN x VOUT) | -0.13 | 0.01 | 0.13 | %/V | IOUT = 1 µA, VR + 0.5V ≤ VIN ≤ 6.0V | 3 |
| Line Regulation | ΔVOUT/(ΔVIN x VOUT) | -0.19 | 0.01 | 0.19 | %/V | IOUT = 1 mA, VR ≥ 1.2V, VR + 0.5V ≤ VIN ≤ 6.0V | 3 |
| Current Limit | ILIMIT | 150 | 270 | mA | VOUT = 0.95 x VR | 4 | |
| COUT Auto-Discharge Resistance | RDCHG | 280 | 450 | 640 | Ω | SHDN = GND, VOUT = VR | 4 |
| SHDN Logic High Input Voltage | VSHDN-HIGH | 0.91 | 6 | V | 4 | ||
| SHDN Logic Low Input Voltage | VSHDN-LOW | 0 | 0.38 | V | 4 | ||
| SHDN High-Level Current | ISHDN-HIGH | -0.1 | 0.1 | µA | VIN = 6.0V | 4 | |
| SHDN Low-Level Current | ISHDN-LOW | -0.1 | 0.1 | µA | VIN = 6.0V, SHDN = GND | 4 | |
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Junction Operating Temperature | TJ | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TA | -55 | 125 | °C | 5 | ||
| Input Voltage (absolute maximum) | VIN | 6.5 | V | 3 | |||
| VIN, SHDN (absolute maximum) | VIN, SHDN | -0.3 | 6.5 | V | 3 | ||
| Output Voltage (absolute maximum) | VOUT | -0.3 | 6.5 | V | -0.3V to VIN + 0.3V or +6.5V (lowest value) | 3 | |
| Power Dissipation 5-Lead SOT-23 | PD | 600 | mW | JEDEC 51-7 FR-4 board with thermal vias | 3 | ||
| Power Dissipation 5-Lead SOT-23 | PD | 250 | mW | One layer PCB with minimal copper, no additional cooling | 3 | ||
| Operating Ambient Temperature (absolute maximum) | TA | -40 | 85 | °C | 3 | ||
| ESD Protection HBM | 1 | kV | all pins, HBM | 3 | |||
| ESD Protection MM | 200 | V | all pins, MM | 3 | |||
| Output Voltage Temperature Stability | ΔVOUT/(ΔT x VOUT) | 50 | ppm/°C | IOUT = 10 mA, -40°C ≤ TA ≤ +85°C | 4 | ||
| Output Short-Circuit Foldback Current | IOUT_SC | 80 | mA | VOUT = GND | 4 | ||
| Noise | en | 30 | µV(rms) | CIN = COUT = 1 µF, IOUT = 50 mA, f = 10 Hz to 100 kHz | 4 | ||
| Thermal Resistance, SOT-23-5Ld junction to ambient | θJA | 166.67 | °C/W | JEDEC 51-7 FR4 board with thermal vias | 5 | ||
| Thermal Resistance, SOT-23-5Ld junction to ambient | θJA | 400 | °C/W | Note 2 | 5 | ||
| Thermal Resistance, SOT-23-5Ld junction to case | θJC | 81 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MCP1711T-12I - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp1711t-12i-etched.step/mcp1711t-12i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1711t-12i.step/mcp1711t-12i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (36 pp, sha256
1efb929e699f3ee6, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).