main
Ray
mcp1703t-5002e-cb: renamed from mcp1703t-5002e, the part it was built from (MCP1703T-5002E/CB); family listed
2afc94b
MCP1703T-5002E/CB
Microchip · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23A-3
MCP1703T-5002E from Microchip, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground / negative reference. LDO output regulation is referenced to this pin; only the LDO bias current (~2.0 µA typ) flows out of it. Tie directly to the negative side of the input and output capacitors and the load return. |
| 2 | VOUT | power_out | Regulated 5.0 V output (VR = 5.0 V for the 5002 option). Delivers up to 250 mA continuous with 1 µF (min) ceramic output capacitor; DC load current flows out of this pin. Tolerance ±0.4% typical at 25 °C, ±3% max over temperature. |
| 3 | VIN | power_in | Unregulated supply input, 2.7 V to 16 V operating (18 V absolute max). For the 5 V output variant VIN must exceed VOUT + dropout (typ 330 mV / max 650 mV at 250 mA). A low-ESR 1 µF ceramic bypass capacitor close to the pin is recommended for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | SOT-23A-3 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
MCP1703T-5002ECBMCP1703T-5002EMBMCP1703T-5002EDBMCP1703T-5002E
CAD (KiCad official)
- Symbol:
MCP1703T-5002E - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23A-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1703t-5002e-etched.step/mcp1703t-5002e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1703t-5002e.step/mcp1703t-5002e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip datasheet (32 pp, sha256
7bfdaa05d529bf00, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP1703T-5002E/CB. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP1703T-5002E/DB
- MCP1703T-5002E/DB-HXY
- MCP1703T-5002E/MB
- MCP1703T-5002E/MC
# MCP1703T-5002E/CB
**Microchip** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23A-3
MCP1703T-5002E from Microchip, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground / negative reference. LDO output regulation is referenced to this pin; only the LDO bias current (~2.0 µA typ) flows out of it. Tie directly to the negative side of the input and output capacitors and the load return. |
| 2 | VOUT | power_out | Regulated 5.0 V output (VR = 5.0 V for the 5002 option). Delivers up to 250 mA continuous with 1 µF (min) ceramic output capacitor; DC load current flows out of this pin. Tolerance ±0.4% typical at 25 °C, ±3% max over temperature. |
| 3 | VIN | power_in | Unregulated supply input, 2.7 V to 16 V operating (18 V absolute max). For the 5 V output variant VIN must exceed VOUT + dropout (typ 330 mV / max 650 mV at 250 mA). A low-ESR 1 µF ceramic bypass capacitor close to the pin is recommended for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | SOT-23A-3 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `MCP1703T-5002ECB`
- `MCP1703T-5002EMB`
- `MCP1703T-5002EDB`
- `MCP1703T-5002E`
## CAD (KiCad official)
- Symbol: `MCP1703T-5002E`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23A-3 (KiCad packages3D, STEP)
- 3D model files: `mcp1703t-5002e-etched.step` / `mcp1703t-5002e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1703t-5002e.step` / `mcp1703t-5002e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip datasheet](docs/mcp1703t-5002e-datasheet.pdf) (32 pp, sha256 `7bfdaa05d529bf00`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1703t-5002e-datasheet.pdf)
## Other parts in this family
This page is **MCP1703T-5002E/CB**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP1703T-5002E/DB
- MCP1703T-5002E/DB-HXY
- MCP1703T-5002E/MB
- MCP1703T-5002E/MC