main
Ray
Publish 0.1.0
d20edd4
MCP1703T-1202E
Microchip Tech · Power Management Specialized - PMIC · SOT-23A-3
MCP1703T-1202E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground; tie to the negative side of the output and input capacitors, only the 2.0 µA typical LDO bias current flows out of this pin and output regulation is referenced to it. |
| 2 | VOUT | power_out | Regulated voltage output; connect to the positive side of the load and output capacitor (1.0 µF to 22 µF ceramic), carrying the DC load current up to 250 mA (200 mA for outputs below 2.5V). |
| 3 | VIN | power_in | Unregulated supply input accepting 2.7V to 16.0V; needs low source impedance, typically 1 µF of input capacitance for stable operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23A-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | 16 | V | Note 1 | 3 | |
| Input Quiescent Current | Iq | 2 | 5 | µA | IL = 0 mA | 3 | |
| Maximum Output Current | IOUT_mA | 50 | 100 | mA | For VR < 2.5V, VIN ≥ 2.7V | 3 | |
| Maximum Output Current | IOUT_mA | 100 | 130 | mA | For VR < 2.5V, VIN ≥ 2.95V | 3 | |
| Maximum Output Current | IOUT_mA | 150 | 200 | mA | For VR < 2.5V, VIN ≥ 3.2V | 3 | |
| Maximum Output Current | IOUT_mA | 200 | 250 | mA | For VR < 2.5V, VIN ≥ 3.45V | 3 | |
| Output Voltage Regulation (2% grade) | VOUT | -2 | 0.4 | 2 | % | VR-2.0% to VR+2.0%, typ VR±0.4%, Note 2 | 3 |
| Line Regulation | ΔVOUT/(VOUT×ΔVIN) | -0.3 | 0.1 | 0.3 | %/V | (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1 | 3 |
| Load Regulation | ΔVOUT/VOUT | -2.5 | 1 | 2.5 | % | IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.65V, Note 4 | 3 |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 4 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Supply Voltage | VDD | 18 | V | 3 | |||
| Input/Output Voltage | -0.3 | 0.3 | V | All inputs and outputs w.r.t. (VSS-0.3V) to (VIN+0.3V) | 3 | ||
| ESD protection HBM | 4 | kV | All pins, HBM | 3 | |||
| ESD protection MM | 400 | V | All pins, MM | 3 | |||
| Maximum Junction Temperature (abs max) | 150 | °C | 3 | ||||
| Storage temperature (abs max) | -65 | 150 | °C | 3 | |||
| Thermal Resistance, 3LD SOT-23A junction to ambient | θJA | 336 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 | ||
| Thermal Resistance, 3LD SOT-23A junction to case | θJC | 110 | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 | ||
| Output Short Circuit Current | IOUT_SC | 400 | mA | VIN = VIN(MIN) (Note 1), VOUT = GND, average current measured 10 ms after short is applied | 3 | ||
| VOUT Temperature Coefficient | TCVOUT | 50 | ppm/°C | Note 3 | 3 | ||
| Output Delay Time | TDELAY | 1000 | µs | VIN = 0V to 6V, VOUT = 90% VR, RL = 50Ω resistive | 4 | ||
| Output Noise | eN | 8 | µV/(Hz)1/2 | IL = 50 mA, f = 1 kHz, COUT = 1 µF | 4 | ||
| Power Supply Ripple Rejection Ratio | PSRR | 44 | dB | f = 100 Hz, COUT = 1 µF, IL = 100 µA, VINAC = 100 mV pk-pk, CIN = 0 µF, VR = 1.2V | 4 | ||
| Thermal Shutdown Protection | TSD | 150 | °C | 4 |
CAD (KiCad official)
- Symbol:
MCP1703T-1202E - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23A-3 (KiCad packages3D, STEP)
- 3D model files:
mcp1703t-1202e-etched.step/mcp1703t-1202e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1703t-1202e.step/mcp1703t-1202e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
7bfdaa05d529bf00, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP1703T-1202E
**Microchip Tech** · Power Management Specialized - PMIC · SOT-23A-3
MCP1703T-1202E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Regulator ground; tie to the negative side of the output and input capacitors, only the 2.0 µA typical LDO bias current flows out of this pin and output regulation is referenced to it. |
| 2 | VOUT | power_out | Regulated voltage output; connect to the positive side of the load and output capacitor (1.0 µF to 22 µF ceramic), carrying the DC load current up to 250 mA (200 mA for outputs below 2.5V). |
| 3 | VIN | power_in | Unregulated supply input accepting 2.7V to 16.0V; needs low source impedance, typically 1 µF of input capacitance for stable operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23A-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | | 16 | V | Note 1 | 3 |
| Input Quiescent Current | Iq | | 2 | 5 | µA | IL = 0 mA | 3 |
| Maximum Output Current | IOUT_mA | 50 | 100 | | mA | For VR < 2.5V, VIN ≥ 2.7V | 3 |
| Maximum Output Current | IOUT_mA | 100 | 130 | | mA | For VR < 2.5V, VIN ≥ 2.95V | 3 |
| Maximum Output Current | IOUT_mA | 150 | 200 | | mA | For VR < 2.5V, VIN ≥ 3.2V | 3 |
| Maximum Output Current | IOUT_mA | 200 | 250 | | mA | For VR < 2.5V, VIN ≥ 3.45V | 3 |
| Output Voltage Regulation (2% grade) | VOUT | -2 | 0.4 | 2 | % | VR-2.0% to VR+2.0%, typ VR±0.4%, Note 2 | 3 |
| Line Regulation | ΔVOUT/(VOUT×ΔVIN) | -0.3 | 0.1 | 0.3 | %/V | (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1 | 3 |
| Load Regulation | ΔVOUT/VOUT | -2.5 | 1 | 2.5 | % | IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.65V, Note 4 | 3 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | Steady State | 4 |
| Maximum Junction Temperature | TJ | | | 150 | °C | Transient | 4 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |
| Supply Voltage | VDD | | | 18 | V | | 3 |
| Input/Output Voltage | | -0.3 | | 0.3 | V | All inputs and outputs w.r.t. (VSS-0.3V) to (VIN+0.3V) | 3 |
| ESD protection HBM | | 4 | | | kV | All pins, HBM | 3 |
| ESD protection MM | | 400 | | | V | All pins, MM | 3 |
| Maximum Junction Temperature (abs max) | | | | 150 | °C | | 3 |
| Storage temperature (abs max) | | -65 | | 150 | °C | | 3 |
| Thermal Resistance, 3LD SOT-23A junction to ambient | θJA | | 336 | | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 |
| Thermal Resistance, 3LD SOT-23A junction to case | θJC | | 110 | | °C/W | EIA/JEDEC JESD51-7 FR-4 0.063 4-Layer Board | 4 |
| Output Short Circuit Current | IOUT_SC | | 400 | | mA | VIN = VIN(MIN) (Note 1), VOUT = GND, average current measured 10 ms after short is applied | 3 |
| VOUT Temperature Coefficient | TCVOUT | | 50 | | ppm/°C | Note 3 | 3 |
| Output Delay Time | TDELAY | | 1000 | | µs | VIN = 0V to 6V, VOUT = 90% VR, RL = 50Ω resistive | 4 |
| Output Noise | eN | | 8 | | µV/(Hz)1/2 | IL = 50 mA, f = 1 kHz, COUT = 1 µF | 4 |
| Power Supply Ripple Rejection Ratio | PSRR | | 44 | | dB | f = 100 Hz, COUT = 1 µF, IL = 100 µA, VINAC = 100 mV pk-pk, CIN = 0 µF, VR = 1.2V | 4 |
| Thermal Shutdown Protection | TSD | | 150 | | °C | | 4 |
## CAD (KiCad official)
- Symbol: `MCP1703T-1202E`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23A-3 (KiCad packages3D, STEP)
- 3D model files: `mcp1703t-1202e-etched.step` / `mcp1703t-1202e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1703t-1202e.step` / `mcp1703t-1202e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp1703t-1202e-datasheet.pdf) (32 pp, sha256 `7bfdaa05d529bf00`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1703t-1202e-datasheet.pdf)