main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp1703at-2052e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mcp1703at-2052e: viewers · Ray
mcp1703at-2052e-etched.fit.json mcp1703at-2052e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp1703at-2052e-etched.glb mcp1703at-2052e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp1703at-2052e-etched.step mcp1703at-2052e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp1703at-2052e.glb Publish 0.1.0 · Ray
mcp1703at-2052e.kicad_mod Publish 0.1.0 · Ray
mcp1703at-2052e.kicad_sym Publish 0.1.0 · Ray
mcp1703at-2052e.lbr Publish 0.1.0 · Ray
mcp1703at-2052e.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json mcp1703at-2052e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mcp1703at-2052e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MCP1703AT-2052E

Microchip Tech · Power Management - Specialized · SOT-23A-3

MCP1703AT-2052E from Microchip Tech, in a SOT-23A-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground. Tie GND to the negative side of the output and the negative side of the input capacitor. Only the LDO bias current (~2.0 µA typical) flows out of this pin; LDO output regulation is referenced to this pin, so minimize IR drops between GND and the load return.
2 VOUT power_out Regulated voltage output. Connect VOUT to the positive side of the load and the positive terminal of the output capacitor (1 µF to 22 µF ceramic recommended, ESR 0-2 Ω). This pin sources the DC load current up to 250 mA (VR ≥ 2.5 V) or 200 mA (VR < 2.5 V); typical short-circuit current is 400 mA.
3 VIN power_in Unregulated input supply, 2.7 V to 16.0 V absolute operating range (18 V absolute maximum). Bypass with a 1 µF ceramic capacitor equal to or larger than the output capacitor to ensure loop stability and provide energy during dynamic load steps. Low source impedance is required for stable LDO operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23A-3
Category Power Management (PMIC)
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • MCP1703AT-2052ECB
  • MCP1703AT-2052EDB
  • MCP1703AT-2052EMB
  • MCP1703AT-2052E

CAD (KiCad official)

  • Symbol: MCP1703AT-2052E
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23A-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1703at-2052e-etched.step / mcp1703at-2052e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1703at-2052e.step / mcp1703at-2052e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (31 pp, sha256 ee4e9c3b0b2c09bb, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF