Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1703-1502E

Microchip Tech · Power Management Specialized - PMIC · SOT-223-3

MCP1703-1502E from Microchip Tech, in a SOT-223-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated input supply; low source impedance is needed for stable LDO operation, and about 1 µF of input capacitance ensures stable operation for most applications.
2 GND power_in Regulator ground, tied to the negative side of the output and input capacitors; only the 2.0 µA typical LDO bias current flows out of this pin, and the SOT-223 tab is also GND.
3 VOUT power_out Regulated output voltage that carries the full DC load current and should connect to the positive terminal of the output capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-223-3
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 16 V Note 1 3
Maximum Output Current (VR < 2.5V) IOUT_mA 50 100 mA For VR < 2.5V, VIN ≥ 2.7V 3
Maximum Output Current (VR < 2.5V) IOUT_mA 100 130 mA For VR < 2.5V, VIN ≥ 2.95V 3
Maximum Output Current (VR < 2.5V) IOUT_mA 150 200 mA For VR < 2.5V, VIN ≥ 3.2V 3
Maximum Output Current (VR < 2.5V) IOUT_mA 200 250 mA For VR < 2.5V, VIN ≥ 3.45V 3
Input Quiescent Current Iq 2 5 µA IL = 0 mA 3
Output Voltage Regulation tolerance (2.0% grade, relative to VR) VOUT -2 0.4 2 % Note 2 3
Line Regulation ΔVOUT/(VOUT×ΔVIN) -0.3 0.1 0.3 %/V (VOUT(MAX) + VDROPOUT(MAX)) ≤ VIN ≤ 16V, Note 1 3
Load Regulation ΔVOUT/VOUT -2.5 1 2.5 % IL = 1.0 mA to 200 mA for VR < 2.5V, VIN = 3.65V, Note 4 3
Operating Junction Temperature Range TJ -40 125 °C Steady State 4
Maximum Junction Temperature TJ 150 °C Transient 4
Storage Temperature Range TA -65 150 °C 4
VDD (supply voltage absolute maximum) VDD 18 V 3
ESD protection (HBM) 4 kV HBM 3
ESD protection (MM) 400 V MM 3
Thermal Resistance, junction to ambient (3LD SOT-223) θJA 62 °C/W EIA/JEDEC JESD51-7, FR-4 0.063 4-Layer Board 4
Thermal Resistance, junction to case (3LD SOT-223) θJC 15 °C/W 4
Output Capacitance (ceramic, stable range) COUT 1 22 µF Ceramic output capacitance 1

CAD (KiCad official)

  • Symbol: MCP1703-1502E
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1703-1502e-etched.step / mcp1703-1502e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1703-1502e.step / mcp1703-1502e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 7bfdaa05d529bf00, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF