MCP1702-5002E

{
  "slug": "mcp1702-5002e",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Linear Voltage Regulators (LDO), TO-92. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "mcp1702-5002e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp1702-5002e.kicad_sym",
    "mcp1702-5002e.kicad_mod",
    "mcp1702-5002e.glb",
    "mcp1702-5002e.step",
    "mcp1702-5002e.lbr",
    "docs/hero.png",
    "docs/mcp1702-5002e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp1702-5002e-hero.glb",
    "mcp1702-5002e-hero.overlay.json",
    "mcp1702-5002e-etched.glb"
  ],
  "component": {
    "mpn": "MCP1702-5002E",
    "manufacturer": "Microchip Tech",
    "package": "TO-92",
    "pin_count": 3,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://ww1.microchip.com/downloads/en/DeviceDoc/22008E.pdf",
    "parts": {
      "symbol": "mcp1702-5002e.kicad_sym",
      "footprint": "mcp1702-5002e.kicad_mod",
      "model_3d": "mcp1702-5002e-hero.glb",
      "model_3d_plain": "mcp1702-5002e-etched.glb",
      "model_3d_step": "mcp1702-5002e-etched.step",
      "model_3d_step_plain": "mcp1702-5002e.step",
      "lbr": "mcp1702-5002e.lbr"
    },
    "distributor_links": {
      "lcsc": "C145618"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T00:28:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Regulator ground that must be tied to the negative side of the output and input capacitors and to the load return, carrying only the 2.0 µA typical LDO bias current while the output regulation is referenced to this pin."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Unregulated input supply that requires a low source impedance for stable LDO operation, where about 1 µF of capacitance is sufficient for most applications and the input operating range is 2.7V to 13.2V."
      },
      {
        "number": "3",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output that connects to the load and the positive terminal of the output capacitor, which should sit as close to the pin as practical, and carries the DC load current (250 mA maximum for output voltages of 2.5V or higher)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table on page 11 is a multi-column layout (SOT-23A, SOT-89, TO-92). The TO-92 column was rea"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0327,
        "at": "2026-10-29T00:28:04"
      },
      "datasheet": {
        "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/22008E.pdf",
        "pages": 26,
        "sha256": "eebbb32821ad97ab",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp1702-5002e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          4.83,
          3.745,
          9.8
        ],
        "zmin_mm": -2.5,
        "centre_offset_mm": 0.542,
        "footprint_binding": "identity",
        "sha256": "f0b61c32ecbf0067157adc5a3d4966ceadf5d6dafe93c51af35f76c41c71a54a",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp1702-5002e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          4.83,
          3.745,
          9.8
        ],
        "zmin_mm": -2.5,
        "centre_offset_mm": 0.542,
        "footprint_binding": "identity",
        "sha256": "cb994e62d87169d3d06bcf29c800246ff9f42f96d1e3de0d9d62b27c628d7e26",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}