main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs mcp1700t-3302e: factory component page (tier=lcsc) · Ray
viewers mcp1700t-3302e: viewers · Ray
mcp1700t-3302e-etched.fit.json mcp1700t-3302e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp1700t-3302e-etched.glb mcp1700t-3302e: factory component page (tier=lcsc) · Ray
mcp1700t-3302e-etched.step mcp1700t-3302e: factory component page (tier=lcsc) · Ray
mcp1700t-3302e-hero.glb mcp1700t-3302e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp1700t-3302e-mb-hero.glb Publish 0.1.1 · Ray
mcp1700t-3302e-mb-hero.overlay.json Publish 0.1.1 · Ray
mcp1700t-3302e.glb mcp1700t-3302e: factory component page (tier=lcsc) · Ray
mcp1700t-3302e.kicad_mod mcp1700t-3302e-mb: renamed from mcp1700t-3302e, the part it was built from (MCP1700T-3302E/MB); family listed · Ray
mcp1700t-3302e.kicad_sym mcp1700t-3302e: factory component page (tier=lcsc) · Ray
mcp1700t-3302e.lbr mcp1700t-3302e-mb: renamed from mcp1700t-3302e, the part it was built from (MCP1700T-3302E/MB); family listed · Ray
mcp1700t-3302e.step mcp1700t-3302e: factory component page (tier=lcsc) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md mcp1700t-3302e-mb: renamed from mcp1700t-3302e, the part it was built from (MCP1700T-3302E/MB); family listed · Ray

MCP1700T-3302E/MB

Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3

MCP1700T-3302E from Microchip Tech, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground that must be tied to the negative side of the output and input capacitors, carrying only the LDO bias current (1.6 µA typical) with no high current flowing through it.
2 VIN power_in Unregulated input supply pin with an operating input range of 2.3V to 6.0V, requiring a low source impedance and about 1 µF of capacitance for stable operation in most applications.
3 VOUT power_out Regulated 3.3V output that delivers the full DC load current, with the positive terminal of the output capacitor placed as close to this pin as practical.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-89-3
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.3 6 V Note 1 3
Input Quiescent Current Iq 1.6 4 µA IL = 0 mA, VIN = VR + 1V 3
Maximum Output Current IOUT_mA 250 mA For VR ≥ 2.5V 3
Output Voltage Tolerance (+25 °C) VOUT -2 0.4 2 % TA = +25°C; Note 2: VIN = VR + 1.0V; IOUT = 100 µA 3
Output Voltage Tolerance (over temperature) VOUT -3 3 % Boldface: TJ -40°C to +125°C; Note 2 3
Line Regulation VOUT/(VOUT×VIN) -1 0.75 1 %/V (VR + 1)V ≤ VIN ≤ 6V 3
Load Regulation VOUT/VOUT -1.5 1 1.5 % IL = 0.1 mA to 250 mA for VR ≥ 2.5V; Note 4 3
Dropout Voltage VIN - VOUT 178 350 mV VR ≥ 2.5V; IL = 250 mA, (Note 1, Note 5) 3
Operating Junction Temperature Range TJ -40 125 °C 4
Specified Temperature Range TA -40 125 °C 4
Storage Temperature Range TA -65 150 °C 3
Maximum Junction Temperature 150 °C 3
VDD Supply Voltage VDD 6.5 V 3
VOUT Temperature Coefficient TCVOUT 50 ppm/°C Note 3 3
Thermal Resistance, junction to ambient (SOT-89) JA 104 °C/W EIA/JEDEC JESD51-7, FR-4 4-Layer Board 4
Thermal Resistance, junction to case top (SOT-89) JC(Top) 74 °C/W EIA/JEDEC JESD51-7, FR-4 4-Layer Board 4
Thermal Resistance, junction to top characterization (SOT-89) JT 30 °C/W EIA/JEDEC JESD51-7, FR-4 4-Layer Board 4

CAD (KiCad official)

  • Symbol: MCP1700T-3302E
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1700t-3302e-etched.step / mcp1700t-3302e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1700t-3302e.step / mcp1700t-3302e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (30 pp, sha256 45de7f59f22d6adc, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP1700T-3302E/MB. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP1700T-3302E/TT