main
Ray Publish 0.1.0 c614185

MCP1700T-3002E

Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3

MCP1700T-3002E from Microchip Tech, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground; tie to the negative side of the output and input capacitors, only the 1.6 µA typical LDO bias current flows out of this pin, and output regulation is referenced to it.
2 VIN power_in Unregulated supply input for 2.3V to 6.0V operation; connect to the input source with about 1 µF of capacitance for stable operation.
3 VOUT power_out Regulated voltage output delivering up to 250 mA (200 mA for outputs below 2.5V); connect to the load and a 1 µF output capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-89-3
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.3 6 V Note 1 3
Input Quiescent Current Iq 1.6 4 µA IL = 0 mA, VIN = VR + 1V 3
Maximum Output Current IOUT_mA 250 mA For VR ≥ 2.5V 3
Line Regulation ΔVOUT/(VOUT×ΔVIN) -1 0.75 1 %/V (VR + 1)V ≤ VIN ≤ 6V, typ ±0.75 3
Load Regulation ΔVOUT/VOUT -1.5 1 1.5 % IL = 0.1 mA to 250 mA for VR ≥ 2.5V, Note 4, typ ±1.0 3
Dropout Voltage VIN-VOUT 178 350 mV VR ≥ 2.5V, IL = 250 mA, (Note 1, Note 5) 3
Output Short Circuit Current IOUT_SC 408 mA VIN = VR + 1V, VOUT = GND, peak current measured 10 ms after short is applied 3
VOUT Temperature Coefficient TCVOUT 50 ppm/°C Note 3 3
Output Rise Time TR 500 µs 10% VR to 90% VR, VIN = 0V to 6V, RL = 50 Ω resistive 3
Output Noise eN 3 µV/√Hz IL = 100 mA, f = 1 kHz, COUT = 1 µF 4
Power Supply Ripple Rejection Ratio PSRR 44 dB f = 100 Hz, COUT = 1 µF, IL = 50 mA, VINAC = 100 mV pk-pk, CIN = 0 µF, VR = 1.2V 4
Thermal Shutdown Protection TSD 140 °C VIN = VR + 1V, IL = 100 µA 4
Specified Temperature Range TA -40 125 °C 4
Operating Temperature Range TJ -40 125 °C 4
Storage Temperature Range TA -65 150 °C 4
Supply Voltage VDD 6.5 V 3
Input/Output Voltage -0.3 0.3 V All inputs and outputs w.r.t. (VSS - 0.3V) to (VIN + 0.3V); max is VIN + 0.3V 3
Storage Temperature -65 150 °C 3
Maximum Junction Temperature TJ 150 °C 3
Operating Junction Temperature TJ -40 125 °C 3
ESD protection HBM 4 kV All pins, HBM (≥ 4 kV as printed) 3
ESD protection MM 400 V All pins, MM (≥ 400V as printed) 3
Thermal Resistance, SOT-89, Junction to Ambient θJA 104 °C/W EIA/JEDEC JESD51-7 FR-4 4-Layer Board 4
Thermal Resistance, SOT-89, Junction to Case (Top) θJC(Top) 74 °C/W EIA/JEDEC JESD51-7 FR-4 4-Layer Board 4
Thermal Resistance, SOT-89, Junction to Top characterization ΨJT 30 °C/W EIA/JEDEC JESD51-7 FR-4 4-Layer Board 4

CAD (KiCad official)

  • Symbol: MCP1700T-3002E
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89-3 (KiCad packages3D, STEP)
  • 3D model files: mcp1700t-3002e-mb-etched.step / mcp1700t-3002e-mb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1700t-3002e-mb.step / mcp1700t-3002e-mb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 44919ee695b5d6ef, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF