component

MCP1700

Public Made by Adom

by adom

Microchip 250 mA low-quiescent LDO, SOT-23. 1.6 uA Iq, low dropout, fixed 3.3 V. For battery designs. Datasheet-verified.

componentvoltage-regulatorldolow-power3v3sot-23microchip
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs mcp1700: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers cross-highlight symbol + footprint viewers · Ray
mcp1700-etched.fit.json mcp1700: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp1700-etched.glb mcp1700: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp1700-etched.step mcp1700: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
MCP1700.adom-lbr.json MCP1700: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray
mcp1700.glb Publish 0.1.0 · Ray
mcp1700.kicad_mod Publish 0.1.0 · Ray
mcp1700.kicad_sym Publish 0.1.0 · Ray
mcp1700.lbr add validated EAGLE .lbr (Fusion library) · Ray
MCP1700.lbr MCP1700: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray
mcp1700.step add .step (Fusion 3D source) · Ray
package.json Publish 0.1.0 · Ray
page.json mcp1700: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mcp1700: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MCP1700

Microchip Technology · 250 mA low-quiescent LDO · SOT-23

A 250 mA low-dropout regulator built for battery-powered designs, in SOT-23. What sets it apart is its quiescent current: just 1.6 uA typical, so it barely drains a coin cell or Li-ion when the load is idle. It is offered in fixed output voltages (this page is the 3.3 V MCP1700-3302), holds good line and load regulation, and needs only small 1 uF ceramic input and output capacitors for stability. The dropout is modest for the class, so keep the input at least a couple hundred millivolts above the output at full load. Input up to 6 V.

Pinout

Pin Name Type Function
1 GND power_in Regulator ground. Tie to the negative side of the output and input capacitors. Only the LDO bias current (1.6 µA typical) flows out of this pin; the LDO output regulation is referenced to this pin.
2 VOUT power_out Regulated output voltage (1.2 V to 5.0 V depending on ordering suffix). Connect to the positive side of the load and to the positive terminal of a 1 µF ceramic output capacitor. Delivers up to 250 mA (VR ≥ 2.5 V) or 200 mA (VR < 2.5 V).
3 VIN power_in Unregulated input supply voltage, 2.3 V to 6.0 V. Connect a 1 µF ceramic (or tantalum/aluminum electrolytic) input capacitor close to this pin to ensure stable LDO operation.

Key specifications

Parameter Value
Type Low-quiescent LDO regulator
Output current 250 mA
Quiescent current 1.6 µA typ
Output voltage 3.3 V (fixed, this variant)
Dropout 178 mV at 200 mA
Input voltage 2.3-6 V
Capacitors 1 µF ceramic in/out
Package SOT-23 (3-lead)

Ordering variants

Same part, different packaging or reel option.

  • MCP1700T-3302E/TT (SOT-23, 3.3 V)
  • MCP1700-3002E/TO (TO-92, 3.0 V)

CAD (KiCad official)

  • Symbol: Regulator_Linear:MCP1700x-330xxTT
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D)
  • 3D model files: mcp1700-etched.step / mcp1700-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1700.step / mcp1700.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Technology datasheet (30 pp, sha256 808bac85cf4d3fea, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF