Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1640DT-I

Microchip Tech · DC-DC Converters · SOT-23-6

MCP1640DT-I from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW passive Switch node connecting the boost inductor input; it carries inductor current and can be as high as 800 mA peak.
2 GND power_in Ground return pin for circuit ground; the trace from input cap return, output cap return and GND should be kept as short as possible.
3 EN input Logic-level enable input; a logic high (>90% of VIN) enables the regulator output and a logic low (<20% of VIN) ensures it is disabled.
4 VFB input Feedback pin that sets output regulation through a resistor divider; feedback voltage is 1.21V typical with the output in regulation.
5 VOUT power_out Output voltage pin connecting the integrated P-Channel MOSFET to the output capacitor; the FB voltage divider also connects to this pin.
6 VIN power_in Power supply input voltage pin; the input source should be decoupled to GND with a 4.7 µF minimum capacitor.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Start-Up Voltage VIN 0.65 0.8 V Note 1 3
Output Voltage Adjust Range VOUT 2 5.5 V VOUT VIN; Note 2 3
Feedback Voltage VFB 1.175 1.21 1.245 V 3
Quiescent Current PFM Mode IQPFM 19 30 µA Measured at VOUT = 4.0V; EN = VIN, IOUT = 0 mA; Note 3 3
Quiescent Current Shutdown IQSHDN 0.7 2.3 µA VOUT = EN = GND; Includes N-Channel and P-Channel Switch Leakage 3
NMOS Peak Switch Current Limit IN(MAX) 600 850 mA Note 4 4
VOUT Accuracy VOUT% -3 3 % Includes Line and Load Regulation; VIN = 1.5V 4
Line Regulation VOUT/VOUT/VIN -1 0.01 1 %/V VIN = 1.5V to 3V; IOUT = 25 mA 4
Load Regulation VOUT/VOUT -1 0.01 1 % IOUT = 25 mA to 100 mA; VIN = 1.5V 4
Maximum Duty Cycle DCMAX 88 90 % 4
Switching Frequency fSW 425 500 575 kHz 4
EN Input Logic High VIH 90 %of VIN IOUT = 1 mA 4
EN Input Logic Low VIL 20 %of VIN IOUT = 1 mA 4
Operating Junction Temperature Range TJ -40 125 °C Steady State 4
Storage Temperature Range TA -65 150 °C 4
Maximum Junction Temperature TJ 150 °C Transient 4
Absolute Maximum EN, VFB, VIN, VSW, VOUT to GND 6.5 V 3
Ambient Temperature with Power Applied -40 85 °C 3
Storage Temperature -65 150 °C 3
Operating Junction Temperature -40 125 °C 3
ESD Protection HBM 3 kV On all pins 3
Thermal Resistance, 6LD-SOT-23 θJA 190.5 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts gold MC = Plastic Dual Flat, No Lead (2x3 DFN), 8-lead *Y = Nickel palladium gold manufacturing designator. 29

CAD (KiCad official)

  • Symbol: MCP1640DT-I
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mcp1640dt-i-etched.step / mcp1640dt-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1640dt-i.step / mcp1640dt-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 15fab187ccc7397e, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus off (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF