component
MCP16301T-E
Public Made by Adomby adom
Microchip Tech DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 12d ago |
| viewers | 12d ago |
| mcp16301t-e-etched.glb | 12d ago |
| mcp16301t-e-etched.step | 12d ago |
| mcp16301t-e-hero.glb | 12d ago |
| mcp16301t-e-hero.overlay.json | 12d ago |
| mcp16301t-e.glb | 12d ago |
| mcp16301t-e.kicad_mod | 12d ago |
| mcp16301t-e.kicad_sym | 12d ago |
| mcp16301t-e.lbr | 12d ago |
| mcp16301t-e.step | 12d ago |
| package.json | 12d ago |
| page.json | 12d ago |
| README.md | 12d ago |
MCP16301T-E
Microchip Tech · DC-DC Converters · SOT-23-6
MCP16301T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOST | passive | Boost voltage pin that drives the internal NMOS control switch, with a bootstrap capacitor connected between the BOOST and SW pins. |
| 2 | GND | power_in | Ground pin; keep the trace from the input capacitor return, output capacitor return and GND pin as short as possible to minimize noise. |
| 3 | VFB | input | Output voltage feedback pin connected to an external resistor divider to set the output voltage, regulating at 0.800V typical. |
| 4 | EN | input | Enable pin where logic high (>1.4V) enables operation and logic low (<0.4V) disables the regulator; do not allow this pin to float. |
| 5 | VIN | power_in | Input supply voltage pin for power and internal biasing, decoupled to GND with a 4.7 µF (up to 20 µF) capacitor placed close to the pin. |
| 6 | SW | output | Output switch node connected to the inductor, the freewheeling diode and the bootstrap capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 4 | 30 | V | Note 1 (MCP16301) | 3 | |
| Feedback Voltage | VFB | 0.784 | 0.8 | 0.816 | V | 3 | |
| Output Voltage Adjust Range | VOUT | 2 | 15 | V | Note 2 | 3 | |
| Feedback Voltage Line Regulation | ΔVFB/VFB)/ΔVIN | 0.01 | 0.1 | %/V | VIN = 12V to 30V | 3 | |
| Feedback Input Bias Current | IFB | -250 | 10 | 250 | nA | 3 | |
| Undervoltage Lockout Start | UVLOSTART | 3.5 | 4 | V | VIN Rising (MCP16301) | 3 | |
| Undervoltage Lockout Stop | UVLOSTOP | 2.4 | 3 | V | VIN Falling | 3 | |
| Switching Frequency | fSW | 425 | 500 | 550 | kHz | IOUT = 200 mA | 3 |
| Maximum Duty Cycle | DCMAX | 90 | 95 | % | VIN = 5V; VFB = 0.7V; IOUT = 100 mA | 3 | |
| Quiescent Current | IQ | 2 | 7.5 | mA | VBOOST = 3.3V; Note 3 | 3 | |
| Quiescent Current - Shutdown | IQ | 7 | 10 | µA | VOUT = EN = 0V | 3 | |
| Maximum Output Current | IOUT | 600 | mA | Note 1 | 3 | ||
| EN Input Logic High | VIH | 1.4 | V | 3 | |||
| EN Input Logic Low | VIL | 0.4 | V | 3 | |||
| EN Input Leakage Current | IENLK | 0.05 | 1 | µA | VEN = 12V | 3 | |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Steady State | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Maximum Junction Temperature | TJ | 150 | °C | Transient | 4 | ||
| VIN, SW Voltage | VIN, SW | -0.5 | 40 | V | 3 | ||
| BOOST, GND Voltage | BOOST, GND | -0.5 | 46 | V | 3 | ||
| BOOST, SW Voltage | BOOST, SW | -0.5 | 6 | V | 3 | ||
| VFB Voltage | VFB | -0.5 | 6 | V | 3 | ||
| EN Voltage | EN | -0.5 | V | -0.5V to (VIN + 0.3V) | 3 | ||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temperature with Power Applied | -40 | 125 | °C | 3 | |||
| Operating Junction Temperature | -40 | 150 | °C | 3 | |||
| ESD Protection HBM | 3 | kV | All pins | 3 | |||
| ESD Protection MM | 200 | V | All pins | 3 | |||
| NMOS Switch On Resistance | RDS(ON) | 0.46 | Ω | VBOOST -VSW = 3.3V | 3 | ||
| NMOS Switch Current Limit | IN(MAX) | 1.3 | A | VBOOST -VSW = 3.3V | 3 | ||
| Minimum Duty Cycle | DCMIN | 1 | % | 3 | |||
| Undervoltage Lockout Hysteresis | UVLOHYS | 0.5 | V | 3 | |||
| Soft-Start Time | tSS | 300 | µs | EN Low to High, 90% of VOUT | 4 | ||
| Thermal Shutdown Die Temperature | TSD | 150 | °C | 4 | |||
| Die Temperature Hysteresis | TSDHYS | 30 | °C | 4 | |||
| Thermal Resistance, 6L-SOT-23 | θJA | 190.5 | °C/W | EIA/JESD51-3 Standard | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | CHY*= Plastic Small Outline Transistor (SOT-23), 6-lead *Y = Nickel palladium gold manufacturing designator. | 35 |
CAD (KiCad official)
- Symbol:
MCP16301T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mcp16301t-e-etched.step/mcp16301t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp16301t-e.step/mcp16301t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (38 pp, sha256
c33c910a9fe231be, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).