main
Ray
Publish 0.1.0
40e9eac
MCP1612T-ADJI
Microchip Tech · DC-DC Converters · MSOP-8
MCP1612T-ADJI from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin, operating from 2.7V to 5.5V, with a 10 µF bypass capacitor connected between VIN and PGND. |
| 2 | VCC | power_in | Analog input voltage pin that biases internal analog functions, derived by filtering the VIN supply (10 Ω resistor from VIN and 0.1 µF capacitor to ground recommended). |
| 3 | SHDN | input | Shutdown control input where logic-high (>45% of VIN) enables the regulator and logic-low (<15% of VIN) forces shutdown with both switches off. |
| 4 | COMP | output | Transconductance error amplifier output pin where the external RC compensation network is connected for control-loop stabilization. |
| 5 | FB | input | Feedback input connected to the output through an external resistor divider, with a nominal regulation voltage of 0.8V. |
| 6 | AGND | power_in | Analog ground pin to which all small-signal ground returns are tied. |
| 7 | PGND | power_in | Power ground pin for all large-signal ground returns, kept to a small loop area and length to limit switching noise coupling. |
| 8 | LX | output | Buck inductor output (switch node) pin connected directly to the inductor, carrying large signal-level currents with short connections. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | 5.5 | V | 4 | ||
| Input Shutdown Current | I(VIN) | 0.01 | 1 | µA | Shutdown mode (SHDN = GND) | 4 | |
| Input Quiescent Current | I(VIN) | 5 | 7 | mA | ILOAD = 0 mA | 4 | |
| Internal Oscillator Frequency | FOSC | 1.2 | 1.4 | 1.6 | MHz | 4 | |
| LX Pin Leakage Current | ILX | -1 | 1 | µA | SHDN = 0V, VIN = 5.5V, LX = 0V, LX = 5.5V | 4 | |
| Transconductance from FB to COMP | gm | 35 | 62 | 90 | µA/V | 4 | |
| Output Voltage Range | VOUT | 0.8 | V | Upper limit printed as VIN | 4 | ||
| Reference Feedback Voltage | VFB | 0.78 | 0.8 | 0.82 | V | 4 | |
| Line Regulation | VLINE-REG | 0.15 | 0.5 | %/V | VIN = 2.7V to 5.5V, ILOAD = 100 mA | 4 | |
| Undervoltage Lockout | UVLO | 2.4 | 2.55 | 2.7 | V | Note 2 | 5 |
| Logic-High Input (SHDN) | VIN-HIGH | 45 | % of VIN | 5 | |||
| Logic-Low Input (SHDN) | VIN-LOW | 15 | % of VIN | 5 | |||
| Storage Temperature Range | TA | -65 | 150 | °C | Continuous | 5 | |
| Maximum Junction Temperature | TJ | 150 | °C | Transient Only | 5 | ||
| Operating Junction Temperature Range | TA | -40 | 125 | °C | Continuous Operation | 5 | |
| Absolute Max LX to PGND | LX | -0.3 | V | -0.3V to (VIN + 0.3V) | 4 | ||
| Absolute Max PGND to AGND | PGND to AGND | -0.3 | 0.3 | V | 4 | ||
| Absolute Max Storage Temperature | -65 | 150 | °C | 4 | |||
| Absolute Max Ambient Temp. with Power Applied | -40 | 85 | °C | 4 | |||
| Absolute Max Operating Junction Temperature | -40 | 125 | °C | 4 | |||
| RDSon P-Channel | RDSon-P | 300 | mΩ | IP = 250 mA | 4 | ||
| RDSon N-Channel | RDSon-N | 300 | mΩ | IN = 250 mA | 4 | ||
| Positive Current Limit Threshold | +ILX(MAX) | 2.3 | A | 4 | |||
| Negative Current Limit Threshold | -ILX(MAX) | -1.4 | A | 4 | |||
| Feedback Input Bias Current | IVFB | 1 | nA | 4 | |||
| Load Regulation | VLOAD-REG | 0.25 | % | VIN = 4.2V, ILOAD = 100 mA to 1A | 4 | ||
| Undervoltage Lockout Hysteresis | UVLO-HYS | 200 | mV | 5 | |||
| Thermal Shutdown | TSHD | 160 | °C | Note 1 | 5 | ||
| Thermal Shutdown Hysteresis | TSHD-HYS | 9 | °C | 5 | |||
| Thermal Resistance, 8L-MSOP | θJA | 208 | °C/W | Typical 4-layer board interconnecting vias | 5 |
CAD (KiCad official)
- Symbol:
MCP1612T-ADJI - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp1612t-adji-etched.step/mcp1612t-adji-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1612t-adji.step/mcp1612t-adji.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
70dd4880465f0ab5, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP1612T-ADJI
**Microchip Tech** · DC-DC Converters · MSOP-8
MCP1612T-ADJI from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin, operating from 2.7V to 5.5V, with a 10 µF bypass capacitor connected between VIN and PGND. |
| 2 | VCC | power_in | Analog input voltage pin that biases internal analog functions, derived by filtering the VIN supply (10 Ω resistor from VIN and 0.1 µF capacitor to ground recommended). |
| 3 | SHDN | input | Shutdown control input where logic-high (>45% of VIN) enables the regulator and logic-low (<15% of VIN) forces shutdown with both switches off. |
| 4 | COMP | output | Transconductance error amplifier output pin where the external RC compensation network is connected for control-loop stabilization. |
| 5 | FB | input | Feedback input connected to the output through an external resistor divider, with a nominal regulation voltage of 0.8V. |
| 6 | AGND | power_in | Analog ground pin to which all small-signal ground returns are tied. |
| 7 | PGND | power_in | Power ground pin for all large-signal ground returns, kept to a small loop area and length to limit switching noise coupling. |
| 8 | LX | output | Buck inductor output (switch node) pin connected directly to the inductor, carrying large signal-level currents with short connections. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.7 | | 5.5 | V | | 4 |
| Input Shutdown Current | I(VIN) | | 0.01 | 1 | µA | Shutdown mode (SHDN = GND) | 4 |
| Input Quiescent Current | I(VIN) | | 5 | 7 | mA | ILOAD = 0 mA | 4 |
| Internal Oscillator Frequency | FOSC | 1.2 | 1.4 | 1.6 | MHz | | 4 |
| LX Pin Leakage Current | ILX | -1 | | 1 | µA | SHDN = 0V, VIN = 5.5V, LX = 0V, LX = 5.5V | 4 |
| Transconductance from FB to COMP | gm | 35 | 62 | 90 | µA/V | | 4 |
| Output Voltage Range | VOUT | 0.8 | | | V | Upper limit printed as VIN | 4 |
| Reference Feedback Voltage | VFB | 0.78 | 0.8 | 0.82 | V | | 4 |
| Line Regulation | VLINE-REG | | 0.15 | 0.5 | %/V | VIN = 2.7V to 5.5V, ILOAD = 100 mA | 4 |
| Undervoltage Lockout | UVLO | 2.4 | 2.55 | 2.7 | V | Note 2 | 5 |
| Logic-High Input (SHDN) | VIN-HIGH | 45 | | | % of VIN | | 5 |
| Logic-Low Input (SHDN) | VIN-LOW | | | 15 | % of VIN | | 5 |
| Storage Temperature Range | TA | -65 | | 150 | °C | Continuous | 5 |
| Maximum Junction Temperature | TJ | | | 150 | °C | Transient Only | 5 |
| Operating Junction Temperature Range | TA | -40 | | 125 | °C | Continuous Operation | 5 |
| Absolute Max LX to PGND | LX | -0.3 | | | V | -0.3V to (VIN + 0.3V) | 4 |
| Absolute Max PGND to AGND | PGND to AGND | -0.3 | | 0.3 | V | | 4 |
| Absolute Max Storage Temperature | | -65 | | 150 | °C | | 4 |
| Absolute Max Ambient Temp. with Power Applied | | -40 | | 85 | °C | | 4 |
| Absolute Max Operating Junction Temperature | | -40 | | 125 | °C | | 4 |
| RDSon P-Channel | RDSon-P | | 300 | | mΩ | IP = 250 mA | 4 |
| RDSon N-Channel | RDSon-N | | 300 | | mΩ | IN = 250 mA | 4 |
| Positive Current Limit Threshold | +ILX(MAX) | | 2.3 | | A | | 4 |
| Negative Current Limit Threshold | -ILX(MAX) | | -1.4 | | A | | 4 |
| Feedback Input Bias Current | IVFB | | 1 | | nA | | 4 |
| Load Regulation | VLOAD-REG | | 0.25 | | % | VIN = 4.2V, ILOAD = 100 mA to 1A | 4 |
| Undervoltage Lockout Hysteresis | UVLO-HYS | | 200 | | mV | | 5 |
| Thermal Shutdown | TSHD | | 160 | | °C | Note 1 | 5 |
| Thermal Shutdown Hysteresis | TSHD-HYS | | 9 | | °C | | 5 |
| Thermal Resistance, 8L-MSOP | θJA | | 208 | | °C/W | Typical 4-layer board interconnecting vias | 5 |
## CAD (KiCad official)
- Symbol: `MCP1612T-ADJI`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mcp1612t-adji-etched.step` / `mcp1612t-adji-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1612t-adji.step` / `mcp1612t-adji.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp1612t-adji-datasheet.pdf) (22 pp, sha256 `70dd4880465f0ab5`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp1612t-adji-datasheet.pdf)