main
History Download
Ray Publish 0.1.0 e421904

MCP1601-I

Microchip Tech · DC-DC Converters · MSOP-8

MCP1601-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input source voltage pin for 2.7V to 5.5V supply; a 10 µF input capacitor is recommended if the source is a battery or several inches away.
2 SHDN input Shutdown input: logic low forces shutdown with both switches and oscillator off, logic high enables operation in the selected mode.
3 FB input Output voltage feedback input connected to an external resistor divider, typically regulating to 0.8V.
4 AGND power_in Analog ground return for all small signal ground connections.
5 SYNC/PWM input Oscillator synchronization (external clock 850 kHz to 1 MHz forces PWM-only) or mode select: high for forced PWM, low for auto PWM/PFM.
6 VOUT input Sensed output voltage input, connected directly to the output for sensing.
7 PGND power_in Power ground return for all large signal ground connections.
8 LX output BUCK inductor connection carrying large signal-level currents, to be connected directly to the inductor with short, wide traces.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 2.7 5.5 V ILOAD = 0 mA to 500 mA 3
Shutdown current I(VIN) 0.05 1 µA Shutdown Mode (SHDN = GND) 3
PFM mode current I(VIN) 119 180 µA SYNC/PWM = GND, PFM Mode (ILOAD = 0 mA) 3
Internal oscillator frequency FOSC 650 750 850 kHz SYNC/PWM = VIN 3
External oscillator capture range FSYNC 850 1000 kHz FSYNC > FOSC 3
External oscillator duty cycle FSYN-FALL 10 90 % FSYNC = 1 MHz 3
Pin leakage current ILX -1 1 µA SHDN = 0V, VIN = 5.5V, LX = 0V, LX = 5.5V 3
Output voltage range VOUT 0.9 V upper limit VIN 3
Reference feedback voltage VFB 0.78 0.8 0.82 V 3
Under-voltage lockout UVLO 2.4 2.7 V For VIN decreasing 4
Logic low input VIN-HIGH 15 % of VIN SHDN, SYNC/PWM 4
Logic high input VIN-HIGH 45 % of VIN SHDN, SYNC/PWM 4
Input leakage current IIN-LK 0.1 µA SHDN, SYNC/PWM 4
Specified temperature range TA -40 85 °C 4
Operating junction temperature range TJ -40 125 °C 4
Storage temperature range TA -65 150 °C 4
SHDN, FB, SYNC/PWM, VOUT voltage -0.3 V (AGND-0.3V) to (VIN+0.3V) 3
LX to PGND -0.3 V -0.3V to (VIN+0.3V) 3
PGND to AGND -0.3 0.3 V 3
Storage temperature -65 150 °C 3
Ambient temperature with power applied -40 85 °C 3
Operating junction temperature -40 125 °C 3
RDSon P-channel RDSon-P 500 mΩ IP=100 mA, TA=+25°C, VIN=4.2V 3
RDSon N-channel RDSon-N 500 mΩ IN=100 mA, TA=+25°C, VIN =4.2V 3
Dropout voltage VDROPOUT 250 mV VOUT = 2.7V, ILOAD = 300 mA, TA=+25°C, VDROPOUT=97%VOUT 3
Peak current limit IPEAK-PWM 1 A PWM Mode, SYNC/PWM = VIN, TA = +25°C 3
Feedback input bias current IVFB 0.1 nA 3
Line regulation VLINE-REG 0.1 %/V VIN=2.7V to 5.5V, ILOAD=10 mA 3
Load regulation VLOAD-REG 1.5 % VIN = 3.6V, ILOAD = 0 mA to 300 mA 3
Start-up time TSTART 0.5 ms PWM Mode, SYNC/PWM=VIN 3
Average short circuit current 890 mA RLOAD < 1 ohm 4
UVLO hysteresis UVLO-HYS 190 mV 4
Thermal shutdown TSHD 160 °C 4
Thermal shutdown hysteresis TSHD-HYS 10 °C 4
Thermal resistance, 8-pin MSOP θJA 208 °C/W Single-Layer SEMI G42-88 Board, Natural Convection 4
ESD protection on all pins 4 kV 3

CAD (KiCad official)

  • Symbol: MCP1601-I
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp1601-i-etched.step / mcp1601-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1601-i.step / mcp1601-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 1625b142187b1a27, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF