MCP14A0901T-E

{
  "slug": "mcp14a0901t-e",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Gate Drive ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "mcp14a0901t-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp14a0901t-e.kicad_sym",
    "mcp14a0901t-e.kicad_mod",
    "mcp14a0901t-e.glb",
    "mcp14a0901t-e.step",
    "mcp14a0901t-e.lbr",
    "docs/hero.png",
    "docs/mcp14a0901t-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp14a0901t-e-hero.glb",
    "mcp14a0901t-e-hero.overlay.json",
    "mcp14a0901t-e-etched.glb"
  ],
  "component": {
    "mpn": "MCP14A0901T-E",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management ICs",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/2dac744c8ace074066ebde1f4fa0ec26.pdf",
    "parts": {
      "symbol": "mcp14a0901t-e.kicad_sym",
      "footprint": "mcp14a0901t-e.kicad_mod",
      "model_3d": "mcp14a0901t-e-hero.glb",
      "model_3d_plain": "mcp14a0901t-e-etched.glb",
      "model_3d_step": "mcp14a0901t-e-etched.step",
      "model_3d_step_plain": "mcp14a0901t-e.step",
      "lbr": "mcp14a0901t-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C622980"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:11:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Bias supply input for the MOSFET driver with a range of 4.5V to 18V, which must be decoupled to ground with a local capacitor."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "input",
        "description": "High-impedance control input with low threshold levels and hysteresis to provide noise immunity for slow-edge signals."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Active-high device enable; driving it below the threshold disables the output and pulls OUT/OUT low regardless of IN, and an internal pull-up allows it to float for standard operation."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground return for the input and output stages, which requires a low-impedance connection to the bias supply source return."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground return for the input and output stages, which requires a low-impedance connection to the bias supply source return."
      },
      {
        "number": "6",
        "name": "OUT/OUT",
        "type": "output",
        "description": "CMOS push-pull output capable of sourcing and sinking 9.0A peak current at VDD = 18V, with a 500 mA reverse-current latch-up rating."
      },
      {
        "number": "7",
        "name": "OUT/OUT",
        "type": "output",
        "description": "CMOS push-pull output capable of sourcing and sinking 9.0A peak current at VDD = 18V, with a 500 mA reverse-current latch-up rating."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Bias supply input for the MOSFET driver with a range of 4.5V to 18V, which must be decoupled to ground with a local capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 6 and pin 7 are both printed as OUT/OUT in Table 3-1. The MCP14A0901 is the inverting variant, s; The page 1 package-diagram label order (EN, IN, GND, OUT/OUT on pins 1-4) does not match Table 3-1 (; No specs were requested as a separate field in the schema; the SOIC-8 pinout for the MCP14A0901T-E/S",
          "1/8 pins cited to the wrong page (name found elsewhere): ['8:VDD@p11']"
        ],
        "pages_sent": 13,
        "cost_usd": 0.0164,
        "at": "2026-10-28T16:10:37"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/2dac744c8ace074066ebde1f4fa0ec26.pdf",
        "pages": 30,
        "sha256": "b6fc8e5374b47764",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp14a0901t-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp14a0901t-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ae8769c67c862f76b11fbb47a60efc6dec69c4bf84ee7e34864033af63cb018a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}