main
Ray
mcp14a0454-e: laser-etched CAD + chip hero (factory 2.0.0 backfill)
d93bfde
MCP14A0454-E
Microchip Tech · Gate Drivers · MSOP-8
MCP14A0454-E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable for Driver A. Active-high, low-threshold logic input (VEH ~1.6V, VEL ~1.3V, 0.3V hysteresis). Internal pull-up (~1.5 MΩ) to VDD lets the pin float for normal operation; driving below VEL disables and forces OUTA low regardless of INA. |
| 2 | INA | input | Input for Driver A. High-impedance, low-threshold TTL/CMOS-compatible logic input with hysteresis (VIH ~1.6V, VIL ~1.3V). Input voltage range GND-0.3V to VDD+0.3V; drives OUTA (non-inverting for MCP14A0454). |
| 3 | GND | power_in | Device ground; common return for input and output stages. Must have a low-impedance connection to the bias supply source return since high peak currents flow through it while discharging the capacitive load. |
| 4 | INB | input | Input for Driver B. High-impedance, low-threshold TTL/CMOS-compatible logic input with hysteresis (VIH ~1.6V, VIL ~1.3V). Input voltage range GND-0.3V to VDD+0.3V; drives OUTB (non-inverting for MCP14A0454). |
| 5 | OUTB | output | Push-pull gate-drive output for channel B (non-inverting on MCP14A0454; follows INB). CMOS output sources/sinks up to 4.5A peak (VDD=18V) with ROH ~1.7Ω / ROL ~1.3Ω typical. Latch-up protected to 500 mA reverse current. |
| 6 | VDD | power_in | Bias supply input for the driver; 4.5V to 18V operating range (absolute max +20V). Must be decoupled to GND with a local low-ESR bypass capacitor to source the peak gate-drive currents delivered to the load. |
| 7 | OUTA | output | Push-pull gate-drive output for channel A (non-inverting on MCP14A0454; follows INA). CMOS output sources/sinks up to 4.5A peak (VDD=18V) with ROH ~1.7Ω / ROL ~1.3Ω typical. Latch-up protected to 500 mA reverse current. |
| 8 | ENB | input | Enable for Driver B. Active-high, low-threshold logic input (VEH ~1.6V, VEL ~1.3V, 0.3V hysteresis). Internal pull-up (~1.5 MΩ) to VDD lets the pin float for normal operation; driving below VEL disables and forces OUTB low regardless of INB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MCP14A0454-EE/MSMCP14A0454-ET-E/MSMCP14A0454-EE/SNMCP14A0454-ET-E/SNMCP14A0454-EE/MNYMCP14A0454-ET-E/MNY
CAD (KiCad official)
- Symbol:
MCP14A0454-E - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp14a0454-e-etched.step/mcp14a0454-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp14a0454-e.step/mcp14a0454-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (34 pp, sha256
1a3d8d6619869444, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP14A0454-E
**Microchip Tech** · Gate Drivers · MSOP-8
MCP14A0454-E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable for Driver A. Active-high, low-threshold logic input (VEH ~1.6V, VEL ~1.3V, 0.3V hysteresis). Internal pull-up (~1.5 MΩ) to VDD lets the pin float for normal operation; driving below VEL disables and forces OUTA low regardless of INA. |
| 2 | INA | input | Input for Driver A. High-impedance, low-threshold TTL/CMOS-compatible logic input with hysteresis (VIH ~1.6V, VIL ~1.3V). Input voltage range GND-0.3V to VDD+0.3V; drives OUTA (non-inverting for MCP14A0454). |
| 3 | GND | power_in | Device ground; common return for input and output stages. Must have a low-impedance connection to the bias supply source return since high peak currents flow through it while discharging the capacitive load. |
| 4 | INB | input | Input for Driver B. High-impedance, low-threshold TTL/CMOS-compatible logic input with hysteresis (VIH ~1.6V, VIL ~1.3V). Input voltage range GND-0.3V to VDD+0.3V; drives OUTB (non-inverting for MCP14A0454). |
| 5 | OUTB | output | Push-pull gate-drive output for channel B (non-inverting on MCP14A0454; follows INB). CMOS output sources/sinks up to 4.5A peak (VDD=18V) with ROH ~1.7Ω / ROL ~1.3Ω typical. Latch-up protected to 500 mA reverse current. |
| 6 | VDD | power_in | Bias supply input for the driver; 4.5V to 18V operating range (absolute max +20V). Must be decoupled to GND with a local low-ESR bypass capacitor to source the peak gate-drive currents delivered to the load. |
| 7 | OUTA | output | Push-pull gate-drive output for channel A (non-inverting on MCP14A0454; follows INA). CMOS output sources/sinks up to 4.5A peak (VDD=18V) with ROH ~1.7Ω / ROL ~1.3Ω typical. Latch-up protected to 500 mA reverse current. |
| 8 | ENB | input | Enable for Driver B. Active-high, low-threshold logic input (VEH ~1.6V, VEL ~1.3V, 0.3V hysteresis). Internal pull-up (~1.5 MΩ) to VDD lets the pin float for normal operation; driving below VEL disables and forces OUTB low regardless of INB. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `MCP14A0454-EE/MS`
- `MCP14A0454-ET-E/MS`
- `MCP14A0454-EE/SN`
- `MCP14A0454-ET-E/SN`
- `MCP14A0454-EE/MNY`
- `MCP14A0454-ET-E/MNY`
## CAD (KiCad official)
- Symbol: `MCP14A0454-E`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mcp14a0454-e-etched.step` / `mcp14a0454-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp14a0454-e.step` / `mcp14a0454-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589040321149329408) (34 pp, sha256 `1a3d8d6619869444`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp14a0454-e-datasheet.pdf)