component
MCP1407T-E
Public Made by Adomby adom
Microchip Tech Gate Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1407T-E
Microchip Tech · Gate Drivers · SOIC-8
MCP1407T-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Bias supply input for the MOSFET driver with a 4.5V to 18V range, to be decoupled to ground with local capacitors. |
| 2 | INPUT | input | High-impedance TTL/CMOS-compatible control input with hysteresis that withstands a negative swing up to 5V below ground. |
| 3 | NC | unconnected | No connection; the pin is listed as not connected in the pin function table. |
| 4 | GND | power_in | Device return ground; it needs a low-impedance connection to the supply return, and both GND pins must be used for proper operation. |
| 5 | GND | power_in | Device return ground; it needs a low-impedance connection to the supply return, and both GND pins must be used for proper operation. |
| 6 | OUTPUT | output | CMOS push-pull output that sources peak currents of 6A at VDD = 18V and has a 1.5A reverse-current latch-up rating; both OUTPUT pins must be used. |
| 7 | OUTPUT | output | CMOS push-pull output that sources peak currents of 6A at VDD = 18V and has a 1.5A reverse-current latch-up rating; both OUTPUT pins must be used. |
| 8 | VDD | power_in | Bias supply input for the MOSFET driver with a 4.5V to 18V range; both VDD pins must be used and decoupled to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MCP1407T-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp1407t-e-etched.step/mcp1407t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1407t-e.step/mcp1407t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
63057f1872274b88, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).