Generated by kicad-footprint-generator · KiCad file format 20260206
MCP1319MT-33AE
Microchip Tech · Monitors & Reset Circuits · SOT-23-5
MCP1319MT-33AE from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low open-drain Reset output with internal pull-up resistor (typically 4.7 kΩ) that goes low when VDD falls below the Reset threshold, MR is forced low, the WDI pin sees no edge within the time-out period, or during power-up. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | RST | output | Active-high push-pull Reset output that goes high when VDD falls below the Reset threshold, MR is forced low, the WDI pin sees no edge within the time-out period, or during power-up. |
| 4 | MR | input | Active-low Manual Reset input with internal pull-up resistor and noise filtering, for connecting a push button switch that forces both Reset outputs active when pulled to ground. |
| 5 | VDD | power_in | Positive supply for the device, also the monitored voltage, with a voltage range of 1.0V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | 5.5 | V | 3 | ||
| Specified VDD Value to VOUT Low | VDD | 1 | V | I RST = 10 µA, V RST < 0.3V | 3 | ||
| VDD Trip Point MCP13XX-33 (TA = +25°C) | VTRIP | 3.251 | 3.3 | 3.35 | V | TA = +25°C (Note 1) | 4 |
| VDD Trip Point MCP13XX-33 (TA = -40°C to +125°C) | VTRIP | 3.218 | 3.3 | 3.383 | V | TA = -40°C to +125°C (Note 2) | 4 |
| Threshold Hysteresis MCP13XX-33 (TA = +25°C) | VHYS | 0.033 | 0.198 | V | TA = +25°C (Note 3) | 6 | |
| Threshold Hysteresis MCP13XX-33 (TA = -40°C to +125°C) | VHYS | 0.033 | 0.198 | V | TA = -40°C to +125°C | 6 | |
| VDD Trip Point Tempco | TTPCO | -40 | 40 | ppm/°C | 5 | ||
| RST/RST Low-Level Output Voltage | VOL | 0.3 | V | IOL = 50 µA, 1.0V VDD 1.5V | 8 | ||
| Open-Drain High Voltage on Output | VODH | 13.5 | V | Open-Drain Output pin only, VDD = 3.0V, Time voltage > 5.5V applied 100 s, current into pin limited to 2 mA, +25°C operation recommended (Note 4, Note 5) | 8 | ||
| Input Leakage Current (MR and WDI) | IIL | -1 | 1 | µA | VSS VPIN VDD | 8 | |
| Open-Drain Output Leakage Current | IOD | 0.003 | 1 | µA | MCP1319M open-drain output | 8 | |
| Operating Current, Watchdog Timer Inactive | IDD | 1 | 2 | µA | Watchdog Timer Inactive | 3 | |
| Operating Current, VDD < VTRIP | IDD | 1 | 2 | µA | VDD < VTRIP | 3 | |
| Operating Current, Reset Delay Timer Active | IDD | 5 | 10 | µA | Reset Delay Timer Active | 3 | |
| Falling VDD Trip Point Detected to RST or RST Active | tRPD | 650 | µs | VDD ramped from VTRIPMAX + 250 mV down to VTRIPMIN, 200 mV, VDD falling @ 5 mV/µs, CL = 50 pF (Note 1) | 9 | ||
| Reset active time to RST/RST Inactive | tRST | 1 | 1.4 | 2 | ms | Note 2 | 9 |
| Reset active time to RST/RST Inactive | tRST | 20 | 30 | 40 | ms | Note 2 | 9 |
| Reset active time to RST/RST Inactive | tRST | 140 | 200 | 280 | ms | Standard Time Out | 9 |
| Reset active time to RST/RST Inactive | tRST | 1120 | 1600 | 2240 | ms | Note 2 | 9 |
| MR Pulse Width | tMR | 1 | µs | 10 | |||
| RST Rise Time after RST Active (Push-Pull Outputs only) | tRT | 5 | µs | For RST 10% to 90% of VDD, CL = 50 pF (Note 1) | 9 | ||
| RST Rise Time after RST Inactive (Push-Pull Outputs only) | 5 | µs | For RST 10% to 90% of VDD, CL = 50 pF (Note 1) | 9 | |||
| RST Fall Time after RST Inactive | tFT | 5 | µs | For RST 90% to 10% of VDD, CL = 50 pF (Note 1) | 9 | ||
| RST Fall Time after RST Active | 5 | µs | For RST 90% to 10% of VDD, CL = 50 pF (Note 1) | 9 | |||
| MR Active to RST/RST Active | tMRD | 235 | ns | VDD = 5.0V | 10 | ||
| MR Input Noise filter | tNF | 150 | ns | VDD = 5.0V | 10 | ||
| Pull-up Resistance MR pin | RPU | 52 | k | VDD = 5.5V | 8 | ||
| Pull-up Resistance RST pin (MCP131XM only) | RPU | 4.7 | k | VDD = 5.5V, MCP131XM devices only | 8 | ||
| Input Pin Capacitance (MR and WDI) | CI | 100 | pF | 8 | |||
| Output Pin Capacitive Loading (RST and RST) | CO | 50 | pF | This is the tester loading to meet the AC timing specifications. | 8 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | Except MCP13XX-25 (or below) | 11 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 11 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 11 | |||
| Ambient temp. with power applied | -40 | 125 | °C | 3 | |||
| Supply Voltage (VDD to VSS) | VDD | 7 | V | 3 | |||
| Input current (VDD) | 10 | mA | 3 | ||||
| Output current (RST) | 10 | mA | 3 | ||||
| Voltage on Open-Drain RST (with no internal pull-up resistor) w.r.t. VSS | -0.6 | 13.5 | V | with no internal pull-up resistor | 3 | ||
| ESD protection on all pins | 4 | kV | ESD protection on all pins | 3 | |||
| Thermal Resistance, 5L-SOT-23 | JA | 220.7 | °C/W | 5L-SOT-23 | 11 |
CAD (KiCad official)
- Symbol:
MCP1319MT-33AE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp1319mt-33ae-etched.step/mcp1319mt-33ae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1319mt-33ae.step/mcp1319mt-33ae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (54 pp, sha256
f313bca289b277f3, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).