main
Ray
Publish 0.1.0
ac1abd9
MCP1316MT-29LE
Microchip Tech · Monitors & Reset Circuits · SOT-23-5
MCP1316MT-29LE from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Open-drain active-low Reset output with internal pull-up resistor (typically 4.7 kΩ) that goes low when VDD falls below VTRIP, MR is forced low, WDI sees no edge within the time-out period, or during power-up. |
| 2 | VSS | power_in | The ground reference for the device. |
| 3 | MR | input | Active-low Manual Reset input with internal pull-up and noise filtering, allowing a push button to ground to force RST active. |
| 4 | WDI | input | Watchdog Timer input where an edge transition resets the timer (standard period 1.6 s typical) and a falling edge is required to start it. |
| 5 | VDD | power_in | The positive supply for the device, with a stated voltage range of 1.0V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | 5.5 | V | 3 | ||
| Specified VDD Value to VOUT Low | VDD | 1 | V | I RST = 10 µA, V RST < 0.3V | 3 | ||
| Operating Current (Watchdog Timer Active) | IDD | 5 | 10 | µA | Watchdog Timer Active | 3 | |
| Operating Current (Watchdog Timer Inactive) | IDD | 1 | 2 | µA | Watchdog Timer Inactive | 3 | |
| Operating Current (VDD < VTRIP) | IDD | 1 | 2 | µA | VDD < VTRIP | 3 | |
| Operating Current (Reset Delay Timer Active) | IDD | 5 | 10 | µA | Reset Delay Timer Active | 3 | |
| VDD Trip Point MCP13XX-29 | VTRIP | 2.857 | 2.9 | 2.944 | V | TA = +25°C (Note 1) | 4 |
| VDD Trip Point MCP13XX-29 | VTRIP | 2.828 | 2.9 | 2.973 | V | TA = -40°C to +125°C (Note 2) | 4 |
| Threshold Hysteresis MCP13XX-29 | VHYS | 0.029 | 0.174 | V | TA = +25°C (Note 3) | 6 | |
| VDD Trip Point Tempco | TTPCO | -40 | 40 | ppm/°C | 5 | ||
| RST/RST Low-Level Output Voltage | VOL | 0.3 | V | IOL = 50 µA, 1.0V ≤ VDD ≤ 1.5V | 8 | ||
| Open-Drain High Voltage on Output | VODH | 13.5 | V | Open-Drain Output pin only, VDD = 3.0V, time voltage > 5.5V applied 100 µs, current into pin limited to 2 mA, +25°C operation recommended (Note 4, Note 5) | 8 | ||
| Input Leakage Current (MR and WDI) | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD | 8 | |
| Open-Drain Output Leakage Current | IOD | 0.003 | 1 | µA | 8 | ||
| Output Pin Capacitive Loading (RST and RST) | CO | 50 | pF | Tester loading to meet the AC timing specifications | 8 | ||
| Reset Active Time (Standard Time Out) | tRST | 140 | 200 | 280 | ms | Standard Time Out | 9 |
| MR Pulse Width | tMR | 1 | µs | 10 | |||
| WDI Pulse Width | tWP | 50 | ns | 10 | |||
| Watchdog Time-Out Period (Standard Time Out) | tWD | 1.12 | 1.6 | 2.4 | sec | Standard Time Out | 10 |
| Specified Temperature Range | TA | -40 | 125 | °C | Except MCP13XX-25 (or below) | 11 | |
| Maximum Junction Temperature | TJ | 150 | °C | 11 | |||
| Thermal Resistance, 5L-SOT-23 | JA | 220.7 | °C/W | 11 | |||
| Supply Voltage (VDD to VSS) | 7 | V | 3 | ||||
| Input current (VDD) | 10 | mA | 3 | ||||
| Output current (RST) | 10 | mA | 3 | ||||
| Voltage on all inputs and outputs, except Open-Drain RST (with no internal pull-up resistor), w.r.t. VSS | -0.6 | V | 3 | ||||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temp. with power applied | -40 | 125 | °C | With power applied | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP1316MT-29LE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp1316mt-29le-ot-etched.step/mcp1316mt-29le-ot-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1316mt-29le-ot.step/mcp1316mt-29le-ot.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (54 pp, sha256
f313bca289b277f3, retrieved 2026-11-18) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# MCP1316MT-29LE
**Microchip Tech** · Monitors & Reset Circuits · SOT-23-5
MCP1316MT-29LE from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Open-drain active-low Reset output with internal pull-up resistor (typically 4.7 kΩ) that goes low when VDD falls below VTRIP, MR is forced low, WDI sees no edge within the time-out period, or during power-up. |
| 2 | VSS | power_in | The ground reference for the device. |
| 3 | MR | input | Active-low Manual Reset input with internal pull-up and noise filtering, allowing a push button to ground to force RST active. |
| 4 | WDI | input | Watchdog Timer input where an edge transition resets the timer (standard period 1.6 s typical) and a falling edge is required to start it. |
| 5 | VDD | power_in | The positive supply for the device, with a stated voltage range of 1.0V to 5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | | 5.5 | V | | 3 |
| Specified VDD Value to VOUT Low | VDD | 1 | | | V | I RST = 10 µA, V RST < 0.3V | 3 |
| Operating Current (Watchdog Timer Active) | IDD | | 5 | 10 | µA | Watchdog Timer Active | 3 |
| Operating Current (Watchdog Timer Inactive) | IDD | | 1 | 2 | µA | Watchdog Timer Inactive | 3 |
| Operating Current (VDD < VTRIP) | IDD | | 1 | 2 | µA | VDD < VTRIP | 3 |
| Operating Current (Reset Delay Timer Active) | IDD | | 5 | 10 | µA | Reset Delay Timer Active | 3 |
| VDD Trip Point MCP13XX-29 | VTRIP | 2.857 | 2.9 | 2.944 | V | TA = +25°C (Note 1) | 4 |
| VDD Trip Point MCP13XX-29 | VTRIP | 2.828 | 2.9 | 2.973 | V | TA = -40°C to +125°C (Note 2) | 4 |
| Threshold Hysteresis MCP13XX-29 | VHYS | 0.029 | | 0.174 | V | TA = +25°C (Note 3) | 6 |
| VDD Trip Point Tempco | TTPCO | -40 | | 40 | ppm/°C | | 5 |
| RST/RST Low-Level Output Voltage | VOL | | | 0.3 | V | IOL = 50 µA, 1.0V ≤ VDD ≤ 1.5V | 8 |
| Open-Drain High Voltage on Output | VODH | | | 13.5 | V | Open-Drain Output pin only, VDD = 3.0V, time voltage > 5.5V applied 100 µs, current into pin limited to 2 mA, +25°C operation recommended (Note 4, Note 5) | 8 |
| Input Leakage Current (MR and WDI) | IIL | -1 | | 1 | µA | VSS ≤ VPIN ≤ VDD | 8 |
| Open-Drain Output Leakage Current | IOD | | 0.003 | 1 | µA | | 8 |
| Output Pin Capacitive Loading (RST and RST) | CO | | | 50 | pF | Tester loading to meet the AC timing specifications | 8 |
| Reset Active Time (Standard Time Out) | tRST | 140 | 200 | 280 | ms | Standard Time Out | 9 |
| MR Pulse Width | tMR | 1 | | | µs | | 10 |
| WDI Pulse Width | tWP | 50 | | | ns | | 10 |
| Watchdog Time-Out Period (Standard Time Out) | tWD | 1.12 | 1.6 | 2.4 | sec | Standard Time Out | 10 |
| Specified Temperature Range | TA | -40 | | 125 | °C | Except MCP13XX-25 (or below) | 11 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 11 |
| Thermal Resistance, 5L-SOT-23 | JA | | 220.7 | | °C/W | | 11 |
| Supply Voltage (VDD to VSS) | | | | 7 | V | | 3 |
| Input current (VDD) | | | | 10 | mA | | 3 |
| Output current (RST) | | | | 10 | mA | | 3 |
| Voltage on all inputs and outputs, except Open-Drain RST (with no internal pull-up resistor), w.r.t. VSS | | -0.6 | | | V | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Ambient temp. with power applied | | -40 | | 125 | °C | With power applied | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `MCP1316MT-29LE`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `mcp1316mt-29le-ot-etched.step` / `mcp1316mt-29le-ot-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp1316mt-29le-ot.step` / `mcp1316mt-29le-ot.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/MCP131X-2X-Voltage-Supervisor-DS20001985E.pdf) (54 pp, sha256 `f313bca289b277f3`, retrieved 2026-11-18)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/mcp1316mt-29le-ot-datasheet.pdf)