main
Ray
Publish 0.1.0
299bd51
MCP121T-450E
Microchip Tech · Monitors & Reset Circuits · SOT-23
MCP121T-450E from Microchip Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low open-drain reset output that requires an external pull-up resistor on the MCP121 and is driven low when VDD falls below VTRIP and high when VDD rises above VTRIP + VHYS. |
| 2 | VDD | power_in | Positive power supply input with an operating voltage range of 1.0 V to 5.5 V. |
| 3 | VSS | power_in | Ground reference pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | 5.5 | V | 3 | ||
| Specified VDD Value to RST low | VDD | 1 | V | IRST = 10 µA, VRST < 0.2V | 3 | ||
| Operating Current (MCP121, Reset Power-up Timer Inactive) | IDD | 1.75 | µA | Reset Power-up Timer (tRPU) Inactive | 3 | ||
| Operating Current (MCP121, Reset Power-up Timer Active) | IDD | 20 | µA | Reset Power-up Timer (tRPU) Active | 3 | ||
| VDD Trip Point (MCP1XX-450, TA = +25°C) | VTRIP | 4.314 | 4.38 | 4.446 | V | TA = +25°C (Note 1) | 4 |
| VDD Trip Point (MCP1XX-450, TA = -40°C to +125°C) | VTRIP | 4.271 | 4.38 | 4.49 | V | Note 2 | 4 |
| VDD Trip Point Tempco | TTPCO | -100 | 100 | ppm/°C | 4 | ||
| Threshold Hysteresis (MCP1XX-450) | VHYS | 0.044 | 0.263 | V | TA = +25°C | 4 | |
| RST Low-level Output Voltage | VOL | 0.4 | V | IOL = 500 µA, VDD =VTRIP(MIN) | 4 | ||
| Open-drain High Voltage on Output (MCP121 only) | VODH | 13.5 | V | VDD = 3.0V, Time voltage > 5.5V applied 100s, current into pin limited to 2 mA, 25°C operation recommended (Note 5, Note 6) | 4 | ||
| Open-drain Output Leakage Current (MCP121 only) | IOD | 0.1 | µA | 4 | |||
| VDD Detect to RST Inactive | tRPU | 80 | 120 | 180 | ms | Figure 1-1 and CL = 50 pF | 5 |
| VDD Detect to RST Active | tRPD | 130 | µs | VDD ramped from VTRIP(MAX) + 250 mV down to VTRIP(MIN), 250 mV, per Figure 1-1, CL = 50 pF (Note 1) | 5 | ||
| Specified Temperature Range (except MCP1XX-195) | TA | -40 | 125 | ºC | Except MCP1XX-195 | 5 | |
| Supply Voltage (VDD) Absolute Maximum | VDD | 7 | V | 3 | |||
| Input Current (VDD) | 10 | mA | 3 | ||||
| Output Current (RST) | 10 | mA | 3 | ||||
| Rated Rise Time of VDD | 100 | V/µs | 3 | ||||
| RST Output w.r.t. VSS | -0.6 | 13.5 | V | 3 | |||
| Ambient Temperature with Power Applied | -40 | 125 | °C | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 150 | ºC | 5 | |||
| Thermal Resistance, 3L-SOT-23 Junction to Ambient | θJA | 308 | ºC/W | 5 |
CAD (KiCad official)
- Symbol:
MCP121T-450E - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
mcp121t-450e-etched.step/mcp121t-450e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp121t-450e.step/mcp121t-450e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
46a5e4721c4ef577, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP121T-450E
**Microchip Tech** · Monitors & Reset Circuits · SOT-23
MCP121T-450E from Microchip Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low open-drain reset output that requires an external pull-up resistor on the MCP121 and is driven low when VDD falls below VTRIP and high when VDD rises above VTRIP + VHYS. |
| 2 | VDD | power_in | Positive power supply input with an operating voltage range of 1.0 V to 5.5 V. |
| 3 | VSS | power_in | Ground reference pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | | 5.5 | V | | 3 |
| Specified VDD Value to RST low | VDD | 1 | | | V | IRST = 10 µA, VRST < 0.2V | 3 |
| Operating Current (MCP121, Reset Power-up Timer Inactive) | IDD | | | 1.75 | µA | Reset Power-up Timer (tRPU) Inactive | 3 |
| Operating Current (MCP121, Reset Power-up Timer Active) | IDD | | | 20 | µA | Reset Power-up Timer (tRPU) Active | 3 |
| VDD Trip Point (MCP1XX-450, TA = +25°C) | VTRIP | 4.314 | 4.38 | 4.446 | V | TA = +25°C (Note 1) | 4 |
| VDD Trip Point (MCP1XX-450, TA = -40°C to +125°C) | VTRIP | 4.271 | 4.38 | 4.49 | V | Note 2 | 4 |
| VDD Trip Point Tempco | TTPCO | -100 | | 100 | ppm/°C | | 4 |
| Threshold Hysteresis (MCP1XX-450) | VHYS | 0.044 | | 0.263 | V | TA = +25°C | 4 |
| RST Low-level Output Voltage | VOL | | | 0.4 | V | IOL = 500 µA, VDD =VTRIP(MIN) | 4 |
| Open-drain High Voltage on Output (MCP121 only) | VODH | | | 13.5 | V | VDD = 3.0V, Time voltage > 5.5V applied 100s, current into pin limited to 2 mA, 25°C operation recommended (Note 5, Note 6) | 4 |
| Open-drain Output Leakage Current (MCP121 only) | IOD | | 0.1 | | µA | | 4 |
| VDD Detect to RST Inactive | tRPU | 80 | 120 | 180 | ms | Figure 1-1 and CL = 50 pF | 5 |
| VDD Detect to RST Active | tRPD | | 130 | | µs | VDD ramped from VTRIP(MAX) + 250 mV down to VTRIP(MIN), 250 mV, per Figure 1-1, CL = 50 pF (Note 1) | 5 |
| Specified Temperature Range (except MCP1XX-195) | TA | -40 | | 125 | ºC | Except MCP1XX-195 | 5 |
| Supply Voltage (VDD) Absolute Maximum | VDD | | | 7 | V | | 3 |
| Input Current (VDD) | | | | 10 | mA | | 3 |
| Output Current (RST) | | | | 10 | mA | | 3 |
| Rated Rise Time of VDD | | | | 100 | V/µs | | 3 |
| RST Output w.r.t. VSS | | -0.6 | | 13.5 | V | | 3 |
| Ambient Temperature with Power Applied | | -40 | | 125 | °C | | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | ºC | | 5 |
| Thermal Resistance, 3L-SOT-23 Junction to Ambient | θJA | | 308 | | ºC/W | | 5 |
## CAD (KiCad official)
- Symbol: `MCP121T-450E`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `mcp121t-450e-etched.step` / `mcp121t-450e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp121t-450e.step` / `mcp121t-450e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/20001906D.pdf) (28 pp, sha256 `46a5e4721c4ef577`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp121t-450e-datasheet.pdf)