← Commit history
Publish 0.1.1
4 files changed
+39−37
README.md+11−11@@ -8,9 +8,9 @@ MCP120T-485I from Microchip Tech, in a SOT-23. Pinout and pin descriptions extra | Pin | Name | Type | Function | |---|---|---|---|-| 1 | RST | output | Active-low open-drain RESET output (MCP120 has no internal pull-up), asserted whenever VDD is below the trip point, 4.60V to 4.85V for the -485 grade, and held for 350 ms typical after VDD rises above it. |-| 2 | VDD | power_in | Supply voltage and monitored input, operating range 1.0V to 5.5V with 7.0V absolute maximum. |-| 3 | VSS | power_in | Ground reference for the supply and for all inputs and outputs. |+| 1 | RST | output | Active-low open-drain RESET output (MCP120, no pull-up; the MCP130 adds an internal 5 kΩ pull-up) asserted whenever VDD is below the trip point and held for 350 ms typical (150 to 700 ms) after VDD rises above it. |+| 2 | VDD | power_in | Supply voltage and monitored input, operating range 1.0 V to 5.5 V with 7.0 V absolute maximum, with a 0.1 µF bypass capacitor recommended close to the pin. |+| 3 | VSS | power_in | Ground reference for the device; all inputs and outputs are rated -0.6 V to VDD + 1.0 V with respect to VSS. | ## Key specifications @@ -30,14 +30,14 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Operating Voltage Range | VDD | 1 | | 5.5 | V | | 2 | | VDD Value to RESET | VDDMIN | 1 | | | V | | 2 | | Operating Current | IDD | | 45 | 60 | µA | VDD = 5.5V (no load) | 2 |-| VDD Trip Point, MCP1X0-485 | VTRIP | 4.6 | 4.725 | 4.85 | V | | 2 |-| RESET Low Level Output Voltage, MCP1X0-485 (450/460/475/485 group) | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = VTRIPMIN | 2 |+| VDD Trip Point (MCP1X0-485) | VTRIP | 4.6 | 4.725 | 4.85 | V | MCP1X0-485 | 2 |+| RESET Low Level Output Voltage (MCP1X0-450/460/475/485) | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = VTRIPMIN | 2 | | VDD Detect to RESET Inactive | tRPU | 150 | 350 | 700 | ms | | 2 |-| All inputs and outputs w.r.t. VSS | | -0.6 | | | V | Upper limit printed as VDD + 1.0V | 2 |-| Storage Temperature | | -65 | | 150 | °C | | 2 |-| Ambient Temperature with Power Applied | | -65 | | 125 | °C | | 2 |-| ESD Protection on All Pins | | 2 | | | kV | Printed as ≥ 2 kV | 2 |-| Operating Temperature Range, Industrial (I) | | -40 | | 85 | °C | | 2 |+| All inputs and outputs w.r.t. VSS | | -0.6 | | | V | w.r.t. VSS | 2 |+| Storage temperature | | -65 | | 150 | °C | | 2 |+| Ambient temp. with power applied | | -65 | | 125 | °C | | 2 |+| ESD protection on all pins | | 2 | | | kV | on all pins | 2 |+| Operating ambient temperature (Industrial) | | -40 | | 85 | °C | Industrial (I) | 2 | ## Materials and finish @@ -58,7 +58,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/11184d.pdf) (16 pp, sha256 `4a71b5087051894f`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/11184d.pdf) (16 pp, sha256 `4a71b5087051894f`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
mcp120t-485i-tt.step+1−1@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-12T22:38:33',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-13T03:44:48',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
package.json+12−12@@ -1,6 +1,6 @@ { "slug": "mcp120t-485i-tt",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Tech Monitors & Reset Circuits, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "579-MCP120T-485I/TT" }, "distributor_check": {- "checked_at": "2026-11-12T22:38:40Z",+ "checked_at": "2026-11-13T03:44:56Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MCP120T-485I/TTTR-ND",@@ -70,19 +70,19 @@ "number": "1", "name": "RST", "type": "output",- "description": "Active-low open-drain RESET output (MCP120 has no internal pull-up), asserted whenever VDD is below the trip point, 4.60V to 4.85V for the -485 grade, and held for 350 ms typical after VDD rises above it."+ "description": "Active-low open-drain RESET output (MCP120, no pull-up; the MCP130 adds an internal 5 kΩ pull-up) asserted whenever VDD is below the trip point and held for 350 ms typical (150 to 700 ms) after VDD rises above it." }, { "number": "2", "name": "VDD", "type": "power_in",- "description": "Supply voltage and monitored input, operating range 1.0V to 5.5V with 7.0V absolute maximum."+ "description": "Supply voltage and monitored input, operating range 1.0 V to 5.5 V with 7.0 V absolute maximum, with a 0.1 µF bypass capacitor recommended close to the pin." }, { "number": "3", "name": "VSS", "type": "power_in",- "description": "Ground reference for the supply and for all inputs and outputs."+ "description": "Ground reference for the device; all inputs and outputs are rated -0.6 V to VDD + 1.0 V with respect to VSS." } ], "provenance": {@@ -96,12 +96,12 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The SOT-23-3 drawing on page 1 labels RST and VDD on the left side and VSS on the right side, but pr; The datasheet does not list a pin-function table. The descriptions are built from the features text,",+ "extractor flagged: The SOT-23-3 drawing on page 1 shows RST at the upper left, VDD at the lower left and VSS on the rig; The MPN MCP120T-485I is the open-drain variant without the internal pull-up, so RST needs an externa", "vision extraction: provenance cannot be text-verified; needs consensus" ], "pages_sent": 16,- "cost_usd": 0.3498,- "at": "2026-11-12T22:38:29"+ "cost_usd": 0.111,+ "at": "2026-11-13T03:44:45" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/11184d.pdf",@@ -149,8 +149,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "fe57ce61ff9ab66cddb1a018e6d36422b3677b7713accc3e73c4676a8f245510",- "checked": "2026-11-12",+ "sha256": "2cf26b40f6a8bdc21eda282598368f017e2a5fd441e75874035bd77280fe5804",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -168,8 +168,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "8dd3de862798fcde8466720b2b0f49337e6b774e0bee7cb13197b72d6a6ada0a",- "checked": "2026-11-12",+ "sha256": "b3e63505e1a510f31d135e9b9000e320c6ab494a3f7aa3cde8581bcfb2230b85",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+15−13@@ -4,7 +4,7 @@ "slug": "mcp120t-485i-tt", "title": "MCP120T-485I/TT", "brief": "Microchip Tech Monitors & Reset Circuits, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "579-MCP120T-485I/TT" }, "distributor_check": {- "checked_at": "2026-11-12T22:38:40Z",+ "checked_at": "2026-11-13T03:44:56Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "MCP120T-485I/TTTR-ND",@@ -53,19 +53,19 @@ "number": "1", "name": "RST", "type": "output",- "description": "Active-low open-drain RESET output (MCP120 has no internal pull-up), asserted whenever VDD is below the trip point, 4.60V to 4.85V for the -485 grade, and held for 350 ms typical after VDD rises above it."+ "description": "Active-low open-drain RESET output (MCP120, no pull-up; the MCP130 adds an internal 5 kΩ pull-up) asserted whenever VDD is below the trip point and held for 350 ms typical (150 to 700 ms) after VDD rises above it." }, { "number": "2", "name": "VDD", "type": "power_in",- "description": "Supply voltage and monitored input, operating range 1.0V to 5.5V with 7.0V absolute maximum."+ "description": "Supply voltage and monitored input, operating range 1.0 V to 5.5 V with 7.0 V absolute maximum, with a 0.1 µF bypass capacitor recommended close to the pin." }, { "number": "3", "name": "VSS", "type": "power_in",- "description": "Ground reference for the supply and for all inputs and outputs."+ "description": "Ground reference for the device; all inputs and outputs are rated -0.6 V to VDD + 1.0 V with respect to VSS." } ], "provenance": {@@ -79,12 +79,12 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The SOT-23-3 drawing on page 1 labels RST and VDD on the left side and VSS on the right side, but pr; The datasheet does not list a pin-function table. The descriptions are built from the features text,",+ "extractor flagged: The SOT-23-3 drawing on page 1 shows RST at the upper left, VDD at the lower left and VSS on the rig; The MPN MCP120T-485I is the open-drain variant without the internal pull-up, so RST needs an externa", "vision extraction: provenance cannot be text-verified; needs consensus" ], "pages_sent": 16,- "cost_usd": 0.3498,- "at": "2026-11-12T22:38:29"+ "cost_usd": 0.111,+ "at": "2026-11-13T03:44:45" }, "datasheet": { "url": "https://ww1.microchip.com/downloads/en/DeviceDoc/11184d.pdf",@@ -132,8 +132,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "fe57ce61ff9ab66cddb1a018e6d36422b3677b7713accc3e73c4676a8f245510",- "checked": "2026-11-12",+ "sha256": "2cf26b40f6a8bdc21eda282598368f017e2a5fd441e75874035bd77280fe5804",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -151,8 +151,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "8dd3de862798fcde8466720b2b0f49337e6b774e0bee7cb13197b72d6a6ada0a",- "checked": "2026-11-12",+ "sha256": "b3e63505e1a510f31d135e9b9000e320c6ab494a3f7aa3cde8581bcfb2230b85",+ "checked": "2026-11-13", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -400,5 +400,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Microchip Tech Monitors & Reset Circuits, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }